Download or read book Information Control Problems in Manufacturing Technology 1979 written by U. Rembold and published by Elsevier. This book was released on 2014-05-19 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Control Problems in Manufacturing Technology 1979 is a compilation of papers presented at the second IFAC/IFIP Symposium held at Stuttgart, Germany on October 22-24, 1979. The book discusses the following topics: flexible manufacturing systems research; information processing in large and small systems; materials handling in a manufacturing system; control requirements in industrial robot use; and quality assurance in automated manufacturing processes. The text gives an overview of the Integrated Computer Aided Manufacturing program employed in aerospace batch manufacturing. One paper then presents a research and development program of Japan pertaining to use of lasers in a flexible manufacturing system complex. Another paper discusses the development and set-up of two flexible and different manufacturing systems; the paper also explains the appropriate information processing system that will control such complicated manufacturing processes. Another paper presents the advances in computers for quality control applications that are expected through lower hardware costs and better utilization of statistical methods. Mechanical engineers, technical designers, and students with serious interest in automatic control and computer-aided systems will find this book valuable.
Download or read book Information Control Problems in Manufacturing Technology 1979 written by Symposium on Information Control Problems in Manufacturing Technology. 2, 1979, Stuttgart and published by . This book was released on 1980 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Information Control Problems in Manufacturing Technology 1989 written by E.A. Puente and published by Elsevier. This book was released on 2014-06-28 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium presented and discussed the latest research on new theories and advanced applications of automatic systems, which are developed for manufacturing technology or are applicable to advanced manufacturing systems. The topics included computer integrated manufacturing, simulation and the increasingly important areas of artificial intelligence and expert systems, and applied them to the broad spectrum of problems that the modern manufacturing engineer is likely to encounter in the design and application of increasingly complex automatic systems.
Download or read book Information Control Problems in Manufacturing Technology 1992 written by M.B. Zaremba and published by Elsevier. This book was released on 2016-02-25 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain more than 80 of the best papers presented at the INCOM '92 Symposium, and relate to the vast changes which are occurring worldwide in manufacturing technology. Research oriented technical papers cover subjects such as: simulation of manufacturing processes; sensor based robots; information systems; general aspects of CIM and manufacturing networks.
Download or read book Information Control Problems in Manufacturing Technology 1982 written by D. E. Hardt and published by Elsevier. This book was released on 2014-05-17 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Control Problems in Manufacturing Technology 1982 documents the proceedings of the 4th IFAC/IFIP Symposium held in Maryland, USA, on 26-28 October 1982. The volume contains 27 papers divided into six sections. The papers in Section 1 cover the various US government programs sponsoring manufacturing-related research. This support ranges from basic process physics research to general questions of artificial intelligence in the manufacturing environment. At the heart of any manufacturing operation are the unit processes. Proper control of these processes is vital to achieving the autonomy that will eventually lead to automated manufacturing systems. Section 2 addresses these issues in terms of the general control problem involved and in the solution of specific processing problems. Section 3 presents examples of both on and off-line techniques that use novel methods of data acquisition and signal processing. Section 4 focuses on the role of industrial robots in advanced manufacturing systems. It addresses fundamental questions of manipulator design and control, and modelling of robot work environment. The ability to integrate processes and robots into an efficient manufacturing system is truly the challenge of the future. Section 5 deals with a wide range of such problems, including planning, scheduling, inventory, and decision systems. Section 6 presents specific examples of fully automated manufacturing and assembly systems.
Download or read book Information Control Problems in Manufacturing Technology written by Ulrich Rembold and published by . This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Information Control Problems in Manufacturing Technology 1986 written by A. A. Talʹ and published by Pergamon. This book was released on 1987 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of an IFAC Symposium at which the current solutions for the ever increasing problems in manufacturing technology were discussed. Topics dealt with include flexible manufacturing systems, systems modelling, simulation and software, and the book represents the most up-to-date text in this rapidly advancing field.
Download or read book Information control problems in manufacturing technology written by and published by . This book was released on 1980 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Problems and Devices in Manufacturing Technology 1980 written by T. M. R. Ellis and published by Elsevier. This book was released on 2014-05-20 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Problems and Devices in Manufacturing Technology 1980 presents the proceedings of the 3rd IFAC/IFIP Symposium on Control Problems and Devices in Manufacturing Technology, held in Budapest, Hungary, on October 22–25, 1980. This book discusses the increasing use of robots in both machining and assembly. Organized into 49 chapters, this compilation of papers begins with an overview of the development in computer-aided design and computer-aided manufacturing. This text then explores the application of computers to the automation of manufacturing processes that have resulted in great progress. Other chapters consider the theoretical aspects and devices concerning material handling, machine control, automatic measurement, and inspection. This book discusses as well the significant roles of numerically controlled machine-tools and robots in the manufacturing system. The final chapter deals with identification and optimal operation of cyclic mechanisms. This book is a valuable resource for control and plant engineers as well as for control system designers.
Download or read book Artificial Intelligence in Real Time Control 1992 written by M.G. Rodd and published by Elsevier. This book was released on 2014-06-28 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium had two main aims, to investigate the state-of-the-art in the application of artificial intelligence techniques in real-time control, and to bring together control system specialists, artificial intelligence specialists and end-users. Many professional engineers working in industry feel that the gap between theory and practice in applying control and systems theory is widening, despite efforts to develop control algorithms. Papers presented at the meeting ranged from the theoretical aspects to the practical applications of artificial intelligence in real-time control. Themes were: the methodology of artificial intelligence techniques in control engineering; the application of artificial intelligence techniques in different areas of control; and hardware and software requirements. This symposium showed that there exist alternative possibilities for control based on artificial intelligence techniques.
Download or read book Analysis Design and Evaluation of Man Machine Systems 1992 written by H.G. Stassen and published by Elsevier. This book was released on 2014-06-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing 4 plenary papers and 38 technical papers, this volume contributes to the literature on the important subject of man-machine systems. The many topics discussed include human performance skills, knowledge engineering and expert systems, training procedures, human performance and mental load models, and human-machine interfaces.
Download or read book Information Control Problems in Manufacturing Technology 1982 written by David E. Hardt and published by Pergamon. This book was released on 1983 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses: government activities, control software, manufacturing process control, manufacturing processes & technologies, planning & control, applications, robotics & manufacturing systems.
Download or read book Stochastic Control written by N.K. Sinha and published by Elsevier. This book was released on 2014-05-23 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic control, the control of random processes, has become increasingly more important to the systems analyst and engineer. The Second IFAC Symposium on Stochastic Control represents current thinking on all aspects of stochastic control, both theoretical and practical, and as such represents a further advance in the understanding of such systems.
Download or read book Control in Transportation Systems 1986 written by M.M. Etschmaier and published by Elsevier. This book was released on 2014-05-23 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume investigates developments in, and management of, transportation systems, future trends and what effects these will have on society. The book studies transportation systems planning; traffic problems and the issue of conservation; the use of logistics, and the role of computers and robotics in traffic control.
Download or read book Power Systems Power Plant Control written by P. Wang and published by Elsevier. This book was released on 2014-05-23 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of power systems and power plants is a subject of worldwide interest which continues to sustain a high level of research, development and application in many diverse yet complementary areas. Papers pertaining to 13 areas directly related to power systems and representing state-of-the-art methods are included in this volume. The topics covered include linear and nonlinear optimization, static and dynamic state estimation, security analysis, generation control, excitation and voltage control, power plant modelling and control, stability analysis, emergency and restorative controls, large-scale sparse matrix techniques, data communication, microcomputer systems, power system stabilizers, load forecasting, optimum generation scheduling and power system control centers. The compilation of this information in one volume makes it essential reading for a comprehension of the current knowledge in the field of power control.
Download or read book Advanced Information Processing in Automatic Control AIPAC 89 written by R. Husson and published by Elsevier. This book was released on 2014-05-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Processing is a key area of research and development and the symposium presented state-of-the-art reports on some of the areas which are of relevance in automatic control: fault diagnosis and system reliability. Papers also covered the role of expert systems and other knowledge based systems, which are needed, to cope with the vast quantities of data generated by large scale systems. This volume should be considered essential reading for anyone involved in this rapidly developing area.
Download or read book Modelling and Control of Biotechnical Processes written by A. Halme and published by Elsevier. This book was released on 2014-05-09 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Control of Biotechnical Processes covers the proceedings of the First International Federation of Automatic Control Workshop by the same title, held in Helsinki, Finland on August 17-19, 1982. This book is organized into seven sections encompassing 37 chapters. The opening section deals with the measurement techniques in fermentation processes and the use of automated analyzers to control microbial processes. The next sections consider the concepts of bioreactor modeling and related problems, as well as the modeling and control of biological wastewater treatment processes. Other sections discuss the economic and static optimization, the computer control of production processes, and the application of estimation and identification methods to biotechnological processes. The final sections explore the principles of real-time analysis, use of computer control in specific biotechnical production, process control design, and the modeling of adaptive control. This book is of great value to biotechnologists, biochemists, and control engineers.
