Download or read book Recommendations for Fatigue Design of Welded Joints and Components written by A. F. Hobbacher and published by Springer. This book was released on 2015-12-23 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).
Download or read book Control of Microstructures and Properties in Steel Arc Welds written by Lars-Erik Svensson and published by Routledge. This book was released on 2017-09-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Microstructures and Properties in Steel Arc Welds provides an overview of the most recent developments in welding metallurgy. Topics discussed include common welding processes, the thermal cycle during welding, defects that may occur during the welding process, the metallurgy of the material, metallurgical processes in the heat-affected zone and the fused metal, and the relationship between microstructures and mechanical properties. The book's final chapter presents examples of welded joints, illustrating how modern theories are capable of predicting the microstructure and properties of these joints. This book is an excellent resource for welding engineers, metallurgists, materials scientists, and others interested in the subject.
Download or read book HSLA Steels 2015 Microalloying 2015 Offshore Engineering Steels 2015 written by The Chinese Society for Metals and published by Springer. This book was released on 2017-03-22 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015). The papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further development in the fields all over the world.
Download or read book Introduction to the Physical Metallurgy of Welding written by Kenneth Easterling and published by Elsevier. This book was released on 2013-09-17 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Physical Metallurgy of Welding deals primarily with the welding of steels, which reflects the larger volume of literature on this material; however, many of the principles discussed can also be applied to other alloys. The book is divided into four chapters, in which the middle two deal with the microstructure and properties of the welded joint, such as the weld metal and the heat-affected zone. The first chapter is designed to provide a wider introduction to the many process variables of fusion welding, particularly those that may influence microstructure and properties, while the final chapter is concerned with cracking and fracture in welds. A comprehensive case study of the Alexander Kielland North Sea accommodation platform disaster is also discussed at the end. The text is written for undergraduate or postgraduate courses in departments of metallurgy, materials science, or engineering materials. The book will also serve as a useful revision text for engineers concerned with welding problems in industry.
Download or read book Welding Metallurgy and Weldability of Nickel Base Alloys written by John C. Lippold and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.
Download or read book Self diffusion and Impurity Diffusion in Pure Metals written by Gerhard Neumann and published by Elsevier. This book was released on 2011-08-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusion in metals is an important phenomenon, which has many applications, for example in all kinds of steel and aluminum production, and in alloy formation (technical applications e.g. in superconductivity and semiconductor science). In this book the data on diffusion in metals are shown, both in graphs and in equations.Reliable data on diffusion in metals are required by researchers who try to make sense of results from all kinds of metallurgical experiments, and they are equally needed by theorists and computer modelers. The previous compilation dates from 1990, and measurements relying on the electron microprobe and the recent Rutherford backscattering technique were hardly taken into account there.This reference book, containing all results on self-diffusion and impurity diffusion in pure metals with an indication of their reliability, will be useful to everyone in this field for the theory, fundamental research and industrial applications covered.• Up-to-date and complete (including EPMA and RBS investigations)• Indication of reliability of the measurements• Reassessment of many early results• Data can easily be extracted from Tables and Graphs
Download or read book Engineering Applications of Fracture Analysis written by G. G. Garrett and published by Elsevier. This book was released on 2014-05-23 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Applications of Fracture Analysis is a record of the proceedings of the First National Conference on Fracture, held at Johannesburg, South Africa in November 1979. The papers presented in the conference provide a general picture of fracture studies in South Africa. The contributions cover the theoretical analyses of the influence of dislocation stresses in initiating fracture; practical design of steel components exposed to high-temperature environments; problems encountered in South African industry, such as rock drilling equipment failures, unwanted rock fractures in mines and safety problems in nuclear reactors; fracture study techniques; and formal applications of fracture mechanics. The book will be of interest to metallurgists, engineers, and materials specialists.
Download or read book Fatigue and Fracture Testing of Weldments written by Harry I. McHenry and published by ASTM International. This book was released on 1990 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fifteen papers from a symposium held in Sparks, Nev., April 1988. They cover: low and high cycle fatigue, fatigue crack growth, corrosion fatigue, fracture toughness testing, and wide-plate testing. Annotation copyright Book News, Inc. Portland, Or.
Download or read book Metallurgy of Basic Weld Metal written by G M Evans and published by Elsevier. This book was released on 1997-07-29 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the results of over 20 years research completed this year at one of the world's premier consumable manufacturers and aimed at improving the properties of MMA electrodes for high quality applications. It examines the influence of some 17 elements and welding variables on the composition, microstructure and mechanical properties of the resulting weld metal. The often complex relationships discovered are sufficient to give a good understanding of the properties of weld metals produced by other arc welding processes.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1977 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Weld Integrity and Performance written by Steve Lampman and published by ASM International. This book was released on 1997-01-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key articles from over 10 separate ASM publications are brought together as a practical reference on weld integrity crack prevention. This book thoroughly covers the essentials of weld solidification and cracking, weldability and material selection, process control and heat treatment, failure analysis, and fatigue and fracture mechanics weldments. Contents also include an appendix for quick reference of tabular data on weldability of alloys, process selection, recommended interpass and heat treatment temperatures, and qualification codes and standards.
Download or read book Bainite in Steels written by H.K.D.H. Bhadeshia and published by CRC Press. This book was released on 2019-04-15 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of the book, much expanded to include and incorporate important developments in the subject over the last fifteen years. The book represents a comprehensive treatise on all aspects of the bainite transformation, from the choreography of atoms during the phase change to length scales that are typical of engineering applications. The alloy design that emerges from this explains the role of solute additions, and the pernicious effects of impurities such as hydrogen. The picture presented is self-consistent and therefore is able to guide the reader on the exploitation of theory to the design of some of the most exciting steels, including the world’s first bulk nanostructured metal.
