Download or read book Influence of fully miscible lubrication oil on flow boiling of CO inside horizontal evaporator tubes written by Wetzel, Markus and published by KIT Scientific Publishing. This book was released on 2017-12-27 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Influence of Fully Miscible Lubrication Oil on Flow Boiling of CO Inside Horizontal Evaporator Tubes written by Markus Wetzel and published by . This book was released on 2020-10-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow boiling heat transfer, pressure drop and flow pattern of CO?-POE oil mixtures were experimentally investigated in smooth and micro-fin tubes. The POE oil used features full miscibility in the range of operation investigated. The experimental data was evaluated based on mixture properties, used to evaluate and improve established predictive methods. The knowledge obtained contributes to understanding the influence of oil, which is essential for achieving an efficient evaporator design. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.

Download or read book Proceedings of the ASME JSME Thermal Engineering Joint Conference written by and published by . This book was released on 1991 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2014-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to gas-liquid two-phase flow, boiling and condensation for graduate students, professionals, and researchers in mechanical, nuclear, and chemical engineering. The book provides a balanced coverage of two-phase flow and phase change fundamentals, well-established art and science dealing with conventional systems, and the rapidly developing areas of microchannel flow and heat transfer. It is based on the author's more than 15 years of teaching experience. Instructors teaching multiphase flow have had to rely on a multitude of books and reference materials. This book remedies that problem by covering all the topics that are essential for a graduate first course. Among the important areas that are discussed in the book, and are not adequately covered by virtually all the available textbooks, are: two-phase flow model conservation equations and their numerical solution; condensation with and without noncondensables; and two-phase flow, boiling, and condensation in mini and microchannels.

Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Download or read book Handbook of Evaporation Technology written by Paul E. Minton and published by William Andrew. This book was released on 1988 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume combines a great deal of data only previously available from many different sources into a single, informative volume. It presents evaporation technology as it exists today. Although evaporation is one of the oldest unit operations, it is also an area with dramatic changes in the last quarter century. Although other methods of separation are available, evaporation remains the best process for many applications. All factors must be evaluated in order to select the best evaporator type. This book will be extremely useful in evaluating and deciding which evaporation technology will meet a particular set of requirements.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book Compressors and Their Systems written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2003-11-07 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers from a prestigious IMechE conference looks at the latest innovations and techniques from experts in the field of rotating machinery from industry and academia. Reflecting latest developments in air, gas, refrigeration and related systems, these conference transactions will be of vital importance to all those equipment manufacturers, suppliers, users, and research organizations who wish to be well informed of developments and advances in this important field of engineering. Topics covered: Scroll Compressors Refrigeration Environmental Issues Screw Compressors Reciprocating Compressors Expanders Centrifugal Compressors Novel Designs Linear Compressors Numerical Modelling Operation and Maintenance

Download or read book Two phase Pressure Drops written by Herbert Stanford Isbin and published by . This book was released on 1954 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Refrigeration Systems and Applications written by Ibrahim Dinçer and published by John Wiley & Sons. This book was released on 2017-05-30 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive text/reference for students, researchers and practicing engineers This book provides comprehensive coverage on refrigeration systems and applications, ranging from the fundamental principles of thermodynamics to food cooling applications for a wide range of sectoral utilizations. Energy and exergy analyses as well as performance assessments through energy and exergy efficiencies and energetic and exergetic coefficients of performance are explored, and numerous analysis techniques, models, correlations and procedures are introduced with examples and case studies. There are specific sections allocated to environmental impact assessment and sustainable development studies. Also featured are discussions of important recent developments in the field, including those stemming from the author’s pioneering research. Refrigeration is a uniquely positioned multi-disciplinary field encompassing mechanical, chemical, industrial and food engineering, as well as chemistry. Its wide-ranging applications mean that the industry plays a key role in national and international economies. And it continues to be an area of active research, much of it focusing on making the technology as environmentally friendly and sustainable as possible without compromising cost efficiency and effectiveness. This substantially updated and revised edition of the classic text/reference now features two new chapters devoted to renewable-energy-based integrated refrigeration systems and environmental impact/sustainability assessment. All examples and chapter-end problems have been updated as have conversion factors and the thermophysical properties of an array of materials. Provides a solid foundation in the fundamental principles and the practical applications of refrigeration technologies Examines fundamental aspects of thermodynamics, refrigerants, as well as energy and exergy analyses and energy and exergy based performance assessment criteria and approaches Introduces environmental impact assessment methods and sustainability evaluation of refrigeration systems and applications Covers basic and advanced (and hence integrated) refrigeration cycles and systems, as well as a range of novel applications Discusses crucial industrial, technical and operational problems, as well as new performance improvement techniques and tools for better design and analysis Features clear explanations, numerous chapter-end problems and worked-out examples Refrigeration Systems and Applications, Third Edition is an indispensable working resource for researchers and practitioners in the areas of Refrigeration and Air Conditioning. It is also an ideal textbook for graduate and senior undergraduate students in mechanical, chemical, biochemical, industrial and food engineering disciplines.

Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricating practice has preceded an understanding of the scientific principles. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the understanding of lubricant phenomena will continue to be developed at a molecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in and continuing improvements to lubricant performance and machinery, life-time. More recently, there has been an increased understanding of the chemical aspects of lubrication, which has complemented the knowledge and understanding gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who require a more fundamental understanding of lubricants.

Download or read book Lubricating Grease Manufacturing Technology written by Yu.L. Ishchuk and published by New Age International. This book was released on 2005 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating Grease (Or Grease, To Use A Short Name), Leaving Aside Synthetic Grease For The Moment, Is Arguably Amongst The Highest Value Added Petroleum Products. Lubricating Greases Play Very Crucial Role In The Performance Of Automobiles, Industrial Machinery And Appliances Which Almost Every One Of Us Use, Rely Upon Or Work With Everyday. Lubricating Greases Account For About 5% Of The Global Consumption Of The Lubricants, Which In Turn Account For About 1% Of All Petroleum Products. Thus, In Volume Terms, Lubricating Greases Constitute A Relatively Small, Specialized Industry. Nonetheless, The Importance Of Lubricating Greases Can Not Be Overemphasized. The World Would Quite Literally Grind To A Halt Without Lubricating Greases.There Are Not Many Books On Lubricating Greases. Even The Very Few Books That Are Available In English Language, Largely Encapsulate The Work And Knowledge Developed In North America And West Europe. Significant Scientific And Technological Advancements Were Achieved In The Erstwhile East Bloc Countries During The Second Half Of The 20Th Century. However, It Is Only Over The Last Two Decades That Those Outside The Erstwhile East Bloc Have Been Getting Glimpses Of The Prolific Work Done By Scientists And Technologists In That Part Of The World. This Book Endeavours To Further This Process In A Small Way.

Download or read book Handbook of Hydraulic Resistance written by I. E. Idelchik and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook has been composed on the basis of processing, systematization and classification of the results of a great number of investigations published at different time. The essential part of the book is the outcome of investigations carried out by the author. The present edition of this handbook should assist in increasing the quality and efficiency of the design and usage of indutrial power engineering and other constructions and also of the devices and apparatus through which liquids and gases move.

Download or read book 2008 ASHRAE Handbook written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by Amer Society of Heating. This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Green Extraction of Natural Products written by Farid Chemat and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extraction processes are essential steps in numerous industrial applications from perfume over pharmaceutical to fine chemical industry. Nowadays, there are three key aspects in industrial extraction processes: economy and quality, as well as environmental considerations. This book presents a complete picture of current knowledge on green extraction in terms of innovative processes, original methods, alternative solvents and safe products, and provides the necessary theoretical background as well as industrial application examples and environmental impacts. Each chapter is written by experts in the field and the strong focus on green chemistry throughout the book makes this book a unique reference source. This book is intended to be a first step towards a future cooperation in a new extraction of natural products, built to improve both fundamental and green parameters of the techniques and to increase the amount of extracts obtained from renewable resources with a minimum consumption of energy and solvents, and the maximum safety for operators and the environment.

Download or read book Chemical Thermodynamics for Process Simulation written by Jürgen Gmehling and published by John Wiley & Sons. This book was released on 2019-06-10 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.

Download or read book Heat Transfer in Condensation and Boiling written by Karl Stephan and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.