Download or read book Inertial confinement fusion driver technology written by D. Bixler and published by . This book was released on 1986 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by Committee on the Prospects for Inertial Confinement Fusion Energy Systems and published by National Academies Press. This book was released on 2013-07-19 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.

Download or read book An Introduction to Inertial Confinement Fusion written by Susanne Pfalzner and published by CRC Press. This book was released on 2006-03-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newcomers to the field of inertial confinement fusion (ICF) often have difficulty establishing a clear picture of the overall field. The reason for this is because, while there are many books devoted to special topics within the field, there is none that provides an overview of the field as a whole. An Introduction to Inertial Confinement Fusion fi

Download or read book Assessment of Inertial Confinement Fusion Targets written by National Research Council and published by National Academies Press. This book was released on 2013-06-17 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.

Download or read book Inertial Confinement Fusion Driver Enhancements written by Robert Leon Bieri and published by . This book was released on 1991 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interim Report Status of the Study An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2012-03-19 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific and technological progress in inertial confinement fusion has been substantial during the past decade. However, many of the technologies needed for an integrated inertial fusion energy system are still at an early stage of technological maturity. For all approaches to inertial fusion energy there remain critical scientific and engineering challenges. In this interim report of the study An Assessment of the Prospects for Inertial Fusion Energy, the Committee on the Prospects for Inertial Confinement Fusion Energy Systems outlines their preliminary conclusions and recommendations of the feasibility of inertial fusion energy. The committee also describes its anticipated next steps as it prepares its final report.

Download or read book Status of Laser Drivers for Inertial Confinement Fusion written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The requirements and primary tradeoffs on laser drivers for ICF are discussed. The status of drivers, technology requirements and projections of future are discussed.

Download or read book Energy from Inertial Fusion written by International Atomic Energy Agency and published by . This book was released on 1995 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication describes the current scientific, engineering and technological developments in the field of inertial confinement fusion (ICF). It provides an introduction to ICF as well as an overview of the various technologies needed for inertial fusion power plant development. It was compiled by an international group of experts under the auspices of an IAEA Advisory Group on Inertial Fusion Energy and is intended for a large audience, e.g. policy makers, scientists, engineers or technologists in other fields, and students.

Download or read book The Technology Benefits of Inertial Confinement Fusion Research written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and demonstration of inertial fusion is incredibly challenging because it requires simultaneously controlling and precisely measuring parameters at extreme values in energy, space, and time. The challenges range from building megajoule (106 J) drivers that perform with percent-level precision to fabricating targets with submicron specifications to measuring target performance at micron scale (10−6 m) with picosecond (10−12 s) time resolution. Over the past 30 years in attempting to meet this challenge, the inertial fusion community around the world has invented new technologies in lasers, particle beams, pulse power drivers, diagnostics, target fabrication, and other areas. These technologies have found applications in diverse fields of industry and science. Moreover, simply assembling the teams with the background, experience, and personal drive to meet the challenging requirements of inertial fusion has led to spin-offs in unexpected directions, for example, in laser isotope separation, extreme ultraviolet lithography for microelectronics, compact and inexpensive radars, advanced laser materials processing, and medical technology. The experience of inertial fusion research and development of spinning off technologies has not been unique to any one laboratory or country but has been similar in main research centers in the US, Europe, and Japan. Strengthening and broadening the inertial fusion effort to focus on creating a new source of electrical power (inertial fusion energy [IFE]) that is economically competitive and environmentally benign will yield rich rewards in technology spin-offs. The additional challenges presented by IFE are to make drivers affordable, efficient, and long-lived while operating at a repetition rate of a few Hertz; to make fusion targets that perform consistently at high-fusion yield; and to create target chambers that can repetitively handle greater than 100-MJ yields while producing minimal radioactive by-products. Meeting these challenges will produce spin-off value of enormous magnitude. By exploring the technology spin-offs of the inertial fusion community to date, we can glimpse the expected future rewards from an IFE program.

Download or read book Inertial Confinement Fusion written by and published by . This book was released on 1995 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ion Accelerators as Drivers for Inertial Confinement Fusion written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years the possibility of using intense ion beams to ignite a pellet of fusion fuel has looked increasingly promising. Ion beams ranging in mass from protons up to uranium have been investigated and several machines have been built at different laboratories to investigate the required technology. Light ion drivers are based on the use of high current, high voltage diodes arranged around a central target. These devices have the necessary power and energy to initiate fusion burn but suffer from the inability to transport stably the necessary huge beam currents over long distances to a small target. Heavy ion drivers are based either on the radio-frequency linac or the induction linac. Because heavy ions have a much shorter range than light ions of the same energy, one is able to raise the beam voltage by a factor of one-thousand and lower the current correspondingly. The expected parameters for a fusion driver will be delineated and the present state of development of the technology for the candidate ion beam drivers will be described in light of these desiderata.

Download or read book Progress in Inertial Confinement Fusion at Lawrence Livermore National Laboratory written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the Inertial Fusion Program at the Lawrence Livermore National Laboratory are to study matter under extreme conditions of temperature and pressure and to produce fusion energy from inertially confined fusion fuel. With the conclusion of recent multi-kilojoule 0.53 .mu.m experiments on Novette, we have demonstrated vastly improved plasma conditions compared to those previously obtained at LLNL with similar energies at 1.06 .mu.m and elsewhere with 10 .mu.m radiation. The lower preheat environment obtainable with short wavelength light has led to 3X improvements in the compression of targets on Novette compared to similar targets on Shiva with 1.06 .mu.m. Subsequent experiments on Nova with short wavelength light will begin in 1985. They are expected to demonstrate the necessary compression conditions required for high gain fusion to occur when irradiated with a multi-megajoule driver. These recent results, together with improved calculations, and innovations in driver and reactor technology, indicate that high gain inertial fusion will occur and is a viable candidate for fusion power production in the future.

Download or read book The Release of Thermonuclear Energy by Inertial Confinement written by Friedwardt Winterberg and published by World Scientific. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive book which describes the three essential parts of what is known as "Inertial Confinement Fusion": the way thermonuclear burn takes place in non-magnetized, magnetized and fusion-fission hybrid assemblies; the pulse power ignition technology (nuclear, electrical, optical and chemical); and the applications of inertial confinement fusion technology for peaceful nuclear energy on Earth and in space. An integrated single text of such extensive technical width is a rare find, and younger generations of nuclear engineers any physicists will appreciate this book as a companion to their traditional textbooks.

Download or read book Heavy Ion Drivers for Inertial Confinement Fusion written by and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of heavy ion beams as a way of delivering the needed energy and power to an inertial fusion target are surveyed. The existing broad technology base of particle accelerators provides an important foundation for designing, costing, and evaluating proposed systems. The sequence of steps needed for the verification of the heavy ion approach is described; recent research results are even more encouraging than had been assumed hitherto.

Download or read book Drivers for Inertial Confinement Fusion written by IAEA Technical Committee and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Fusion by Inertial Confinement written by Guillermo Velarde and published by CRC Press. This book was released on 2020-11-25 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Fusion by Inertial Confinement provides a comprehensive analysis of directly driven inertial confinement fusion. All important aspects of the process are covered, including scientific considerations that support the concept, lasers and particle beams as drivers, target fabrication, analytical and numerical calculations, and materials and engineering considerations. Authors from Australia, Germany, Italy, Japan, Russia, Spain, and the U.S. have contributed to the volume, making it an internationally significant work for all scientists working in the Inertial Confinement Fusion (ICF) field, as well as for graduate students in engineering and physics with interest in ICF.

Download or read book Prospects for Inertial Fusion as an Energy Source written by and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Inertial Confinement Fusion (ICF) Program has been very rapid in the last few years. Target physics experiments with laboratory lasers and in underground nuclear tests have shown that the drive conditions necessary to achieve high gain can be achieved in the laboratory with a pulse-shaped driver of about 10 MJ. Requirements and designs for a Laboratory Microfusion Facility (LMF) have been formulated. Research on driver technology necessary for an ICF reactor is making progress. Prospects for ICF as an energy source are very promising. 11 refs., 5 figs.