Download or read book Inelastic Deformation of Metal Matrix Composites written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-08 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inelastic deformation mechanisms for the SiC (SCS-6)/Ti-15-3 system were studied at 538 C (1000 F) using a combination of mechanical measurements and detailed microstructural examinations. The objectives were to evaluate the contributions of plasticity and damage to the overall MMC response, and to compare the room temperature and elevated temperature deformation behaviors. Four different laminates were studied: (0)8, (90)8, (] or -45)2s, and (0/90)2s, with the primary emphasis on the unidirectional (0)8, and (90)8 systems. The elevated temperature responses were similar to those at room temperature, involving a two-stage elastic-plastic type of response for the (0)8 system, and a characteristic three-stage deformation response for the (90)8 and (+ or -45)2s systems. The primary effects of elevated temperatures included: (1) reduction in the 'yield' and failure strengths; (2) plasticity through diffused slip rather than concentrated planar slip (which occurred at room temperature); and (3) time-dependent deformation. The inelastic deformation mechanism for the (0)8 MMC was dominated by plasticity at both temperatures. For the (90)8 and (+ or -45)2s MMCs, a combination of damage and plasticity contributed to the deformation at both temperatures. Majumdar, B. S. and Newaz, G. M. Unspecified Center..
Download or read book Inelastic Deformation of Metal Matrix Composites Plasticity and Damage Mechanisms Part 2 written by and published by . This book was released on 1992 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelastic Deformation of Metal Matrix Composites Part 1 Plasticity and Damage Mechanisms written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-08 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deformation mechanisms of a Ti 15-3/SCS6 (SiC fiber) metal matrix composite (MMC) were investigated using a combination of mechanical measurements and microstructural analysis. The objectives were to evaluate the contributions of plasticity and damage to the overall inelastic response, and to confirm the mechanisms by rigorous microstructural evaluations. The results of room temperature experiments performed on 0 degree and 90 degree systems primarily are reported in this report. Results of experiments performed on other laminate systems and at high temperatures will be provided in a forthcoming report. Inelastic deformation of the 0 degree MMC (fibers parallel to load direction) was dominated by the plasticity of the matrix. In contrast, inelastic deformations of the 90 degree composite (fibers perpendicular to loading direction) occurred by both damage and plasticity. The predictions of a continuum elastic plastic model were compared with experimental data. The model was adequate for predicting the 0 degree response; however, it was inadequate for predicting the 90 degree response largely because it neglected damage. The importance of validating constitutive models using a combination of mechanical measurements and microstructural analysis is pointed out. The deformation mechanisms, and the likely sequence of events associated with the inelastic deformation of MMCs, are indicated in this paper. Majumdar, B. S. and Newaz, G. M. Unspecified Center...
Download or read book Inelastic Deformation of Metal Matrix Composites written by Bhaskar S. Majumdar and published by . This book was released on 1992 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelasticity and Micromechanics of Metal Matrix Composites written by George Voyiadjis and published by Elsevier. This book was released on 2017-05-04 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains fifteen papers based on the presentations made at the symposium on "Inelasticity and Micromechanics of Metal Matrix Composites" held at the University of Washington, USA, in mid-1994. The papers represent the most recent work conducted on inelasticity and micromechanics of metal matrix composites. The book is divided into two parts: Part I deals with the study of inelastic deformation in metal matrix composites, while Part II tackles the micromechanical aspects of metal matrix composites. The articles discuss different aspects of these two topics ranging from purely theoretical treatments to extensive experimental investigations. Many of the papers are by prominent researchers working in this area.
Download or read book American Society for Composites Eighth Proceedings written by American Society for Composites. Technical Conference and published by CRC Press. This book was released on 1993-10-15 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Society of Composites Ninth International Conference Proceedings written by Amer Society Composi and published by CRC Press. This book was released on 1994-09-23 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelastic Deformation Mechanisms in SCS 6 Ti 15 3 Metal Matrix Composite MMC Lamina Under Compression written by FW. Brust and published by . This book was released on 1996 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation was undertaken to study the inelastic deformation mechanisms in [0]8 and [90]8 Ti 15-3/SCS-6 lamina subjected to pure compression. Monotonic tests were conducted at room temperature (RT), 538°C, and 650°C. Results indicate that mechanical response and deformation characteristics were different in monotonic tension and compression loading whereas some of those differences could be attributed to residual stress effects. There were other differences because of changes in damage and failure modes. The inelastic deformation in the [0]8 lamina under compression was controlled primarily by matrix plasticity, although some evidence of fiber-matrix debonding was observed. Failure of the specimen in compression was due to fiber buckling in a macroscopic shear zone (the failure plane). The inelastic deformation mechanisms under compression in [90]8 lamina were controlled by radial fiber fracture, matrix plasticity, and fiber-matrix debonding. The radial fiber fracture was a new damage mode observed by MMCs. Constitutive response was predicted for both the [0]8 and [90]8 laminae, using AGLPLY, METCAN, and Battelle's Unit Cell FEA model. Results from the analyses were encouraging.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelastic Deformation of Metal Matrix Composites written by Clifford Jesse Lissenden and published by . This book was released on 1993 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanisms and Mechanics of Composites Fracture written by Ram B. Bhagat and published by . This book was released on 1993 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 26 papers presented at the International Conference on [title], held to address the latest ideas concerning the mechanisms and mechanics of composite fractures. The main focus was on the "driving forces" behind the various damage events in the inorganic composites at both micro and macro levels. The papers are grouped in five sections: deformation and damage in particulate composites; crack initiation and propagation; micromechanical modeling; fracture and fatigue; and microstructural tailoring, impact, and creep. No index. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Advances in Damage Mechanics Metals and Metal Matrix Composites written by George Voyiadjis and published by Elsevier. This book was released on 2012-12-02 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in a single and unified volume a clear and thorough presentation of the recent advances in continuum damage mechanics for metals and metal matrix composites. Emphasis is placed on the theoretical formulation of the different constitutive models in this area, but sections are added to demonstrate the applications of the theory. In addition, some sections contain new material that has not appeared before in the literature. The book is divided into three major parts: Part I deals with the scalar formulation and is limited to the analysis of isotropic damage in materials; Parts II and III deal with the tensor formulation and is applied to general states of deformation and damage. The material appearing in this text is limited to plastic deformation and damage in ductile materials (e.g. metals and metal matrix composites) but excludes many of the recent advances made in creep, brittle fracture, and temperature effects since the authors feel that these topics require a separate volume for this presentation. Furthermore, the applications presented in this book are the simplest possible ones and are mainly based on the uniaxial tension test.
Download or read book Metal Matrix Composites written by International Conference on Composite Materials and published by Woodhead Publishing. This book was released on 1993 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ECCM 8 European Conference on Composite Materials written by I. Crivelli Visconti and published by Woodhead Publishing. This book was released on 1998 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1994 with total page 1592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Isothermal Damage and Fatigue Behavior of SCS 6 Timetal 21S 0 90 s Composite at 650 C written by and published by . This book was released on 1994 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Matrix Composites written by Shankar Mall and published by CRC Press. This book was released on 2020-01-29 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review and summary of advancements related to mechanical behavior and related mechanics issues of titanium matrix composites (TMCs), a class of high-temperature materials useful in the propulsion and airframe components in advanced aerospace systems. After an introduction to TMCs, different authors review and summarise the advancements related to mechanical behavior and related mechanics issues of TMCs.