Download or read book Industry Guide to Polymer Nanocomposites written by Günter Beyer and published by Elsevier. This book was released on 2009-04-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years the subject of polymer nanocomposites has become a major field of materials research, aiming to study and control the properties of materials at dimensions of a few hundred nanometres, where unique phenomena enable novel applications. Both academia and industry are investigating these materials for many potential applications. Polymer nanocomposites under optimum nanostructuring conditions have shown great improvements in mechanical, thermal, flame retardancy, gas barrier and other properties. In a rapidly advancing field there are already a number of books that examine the theory and developments in particular areas, but no book to date has addressed the current state of knowledge and diversity of applications from an industrial viewpoint. This new book from Plastics Information Direct aims to fill this gap, and demonstrate to an industrial audience the current scope and potential benefits of polymeric nanocomposite applications. The book focuses on the development of polymer nanocomposites for commercial applications, and there are contributions from the industry and academia, which will enable the reader to understand why nanocomposites are already finding applications in the automotive area, the army, aerospace applications, the wire and cable industry and other market segments. The fillers for nanocomposites, their processing and toxicology are also reviewed.

Download or read book Polymer Nanocomposites Handbook written by Rakesh K. Gupta and published by CRC Press. This book was released on 2009-07-20 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the exceptional growth in the use of nanostructured materials for an increasing range of industrial applications, Polymer Nanocomposites Handbook comprehensively covers the synthesis of nanomaterials that act as the building blocks of polymer nanocomposites and polymers that act as matrix materials. From early history to new technologies

Download or read book Bio based Polymers and Nanocomposites written by Muhammed Lamin Sanyang and published by Springer. This book was released on 2019-02-05 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the various types of polymer and nanocomposites that can be derived from biorenewable resources. It covers various aspects of biobased polymers and nanocomposites, including preparation, processing, properties, and performance, and the latest advances in these materials. It also includes recent findings from leading researchers in academia and industry, government, and private research laboratories around the globe, providing the latest information on biobased polymers and nanocomposites. Offering an overview of the entire production process, it guides readers through all stages, from the raw source materials, processing and property characterization to application performance. This book is suitable for professionals and researchers seeking in-depth practical information as well as the fundamental science behind this. It also serves as a point of reference for undergraduate and graduate students, as well as postdoctoral researchers working in the area of polymer and composites with a special emphasis on biobased materials.

Download or read book Nanocomposites written by Luigi Nicolais and published by John Wiley & Sons. This book was released on 2013-12-03 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Step-by-step guide to the synthesis and characterization of metal-polymer nanocomposites Polymer nanocomposites, polymers that are reinforced with nano-sized particles, provide enhanced mechanical, thermal, electrical, and barrier properties. Continued research and development of new polymer nanocomposites promises to provide enhanced materials to a broad range of industries, such as plastics, aerospace, automotive, electronics, packaging, and biomedical devices. Structured as a practical laboratory manual, this book enables readers to expertly synthesize and characterize metal-polymer nanocomposites by clearly setting forth the principles and techniques. Nanocomposites: In Situ Synthesis of Polymer-Embedded Nanostructures features contributions from an international team of materials science and nanotechnology experts. Chapters reflect the authors' critical review of the literature as well as their own laboratory experience working with polymer nanocomposites. The book begins with a detailed introduction to the science, properties, and applications of metal-polymer nanocomposites. Next, it covers such topics as: Morphological and topological concepts Phase separation and nanoparticle aggregation Methods for the synthesis of nanocomposites Morphological control Characterization techniques and data analysis methods Toxicity considerations High-resolution images of metal nanoparticles, created by transmission electron microscopy, are provided throughout the book. There are also plenty of process schemes and detailed drawings, helping readers better understand how to synthesize, characterize, and use these composite materials. A bibliography at the end of each chapter provides a gateway to original research papers and reviews in the field. With its focus on the practical steps of synthesis and characterization, Nanocomposites: In Situ Synthesis of Polymer-Embedded Nanostructures is recommended for both students and practitioners in nanotechnology, polymer science, and materials science and engineering.

Download or read book Handbook of Polymer Nanocomposites for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2020-10-29 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.770 pages Approx.770 pages

Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-26 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.

Download or read book Nanoclay Reinforced Polymer Composites written by Mohammad Jawaid and published by Springer. This book was released on 2016-08-12 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume book series that exhaustively reviews the key recent research into nanoclay reinforced polymer composites. This second volume focuses on nanoclay based nanocomposites and bionanocomposites fabrication, characterization and applications. This includes classification of nanoclay, chemical modification and processing techniques of nanocomposites. The book also provides comprehensive information about nanoclay modification and functionalization; modification of nanoclay systems, geological and mineralogical research on clays suitability; bio-nanocomposites based on nanoclays; modelling of mechanical behaviour of halloysite based composites; mechanical and thermal properties of halloysite nanocomposites; the effect of Nanoclays on gas barrier properties of polymers and modified nanocomposites. This book is a valuable reference guide for academics and industrial practitioners alike.

Download or read book Polymer Nanocomposites written by Aravind Dasari and published by Springer. This book was released on 2016-06-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highlights ongoing research efforts on different aspects of polymer nanocomposites and explores their potentials to exhibit multi-functional properties. In this context, it addresses both fundamental and advanced concepts, while delineating the parameters and mechanisms responsible for these potentials. Aspects considered include embrittlement/toughness; wear/scratch behaviour; thermal stability and flame retardancy; barrier, electrical and thermal conductivity; and optical and magnetic properties. Further, the book was written as a coherent unit rather than a collection of chapters on different topics. As such, the results, analyses and discussions presented herein provide a guide for the development of a new class of multi-functional nanocomposites. Offering an invaluable resource for materials researchers and postgraduate students in the polymer composites field, they will also greatly benefit materials

Download or read book Polymer Nanocomposites written by Joseph H. Koo and published by McGraw Hill Professional. This book was released on 2010-05-10 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the principles, applications, and limitations of a cutting-edge material Based on the author's 26 years of experience in the field of Nanotechnology, this reference offers researchers and materials scientists a complete reference to the physical concepts, techniques, applications and principles underlying one of the most researched materials. Keeps you abreast of the latest trends, developments, and commercial applications

Download or read book Polymer Nanocomposites Processing Characterization and Applications Second Edition written by Joseph H Koo and published by McGraw Hill Professional. This book was released on 2019-07-08 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Up-to-date polymer nanocomposite principles, practices, and characteristics This fully updated guide helps engineers and scientists understand and use the special properties of cutting-edge polymer nanocomposites. Written by a recognized authority in the field, Polymer Nanocomposites: Processing, Characterization, and Applications, Second Edition, begins with an overview of key technologies and processes. Each chapter then examines a different property (structural, mechanical, thermal, flammability, ablation, and electrical) and explains relevant commercial and industrial applications. Examples for a wide variety of usage include applications for spacecraft and defense vehicles, medical and dental implants, flame-retardant and conductive polymers for additive manufacturing, and fire-resistant woven and nonwoven fabrics. Coverage includes:•Nanotechnology and nanomaterials fundamentals•Applications in an expansive range of industries and commercial sectors•Processing of multifunctional polymer nanocomposites•Structure and properties characterization•Mechanical, thermal, flammability, ablation, electrical, and tribological properties•Opportunities, trends, and challenges in the field

Download or read book Photochemical Behavior of Multicomponent Polymeric based Materials written by Dan Rosu and published by Springer. This book was released on 2016-11-21 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers in-depth insights into the photochemical behavior of multicomponent polymeric-based materials, with a particular emphasis on the photodegradation and photostabilization of these materials. Studying various classes of materials bases such as polysaccharides, wood, synthetic polymers, rubber blends, and nanocomposites, it offers a valuable reference source for graduate and postgraduate students, engineering students, research scholars and polymer engineers working in industry.

Download or read book Fire Retardancy of Polymeric Materials written by Charles A. Wilkie and published by CRC Press. This book was released on 2024-07-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Fire Retardancy of Polymeric Materials provides a single source for all aspects of this highly challenging field of applied research. This authoritative book covers design and non-fire requirements that drive how these materials are fire protected. Detailed study and consideration of chemistry, physics, materials science, economic issues and fire safety science is necessary to address considerations of mechanical, thermal, environmental, and end-use requirements on top of fire protection means that the field requires. This thoroughly revised new edition continues to offer comprehensive coverage of the scientific approach for those developing fire safe materials. It covers new topics such as bio-based materials, regulatory issues, recycling, newer flame retardant chemical classes, and more details on how to flame retard materials for specific market applications. Written by a team of experts, this book covers the fundamentals of polymer burning and combustion and how to apply fire protection or flame-retardant chemistries to specific material classes and applications. The book is written for material scientists and fire safety scientists who seek to develop new fire safe materials or understand why materials burn in our modern environment. Features Connects fundamentals of material flammability to practical fire safety needs. Covers current fire safety requirements and regulations affecting flame retardant selection. Provides information on chemical structure-property relationships for flame retardancy. Provides practical guidance on how to design fire safe materials for specific fire risk scenarios. The new edition is expanded to 32 chapters and all chapters are updated and revised with the newest information.

Download or read book Mineral Filled Polymer Composites written by Hanafi Ismail and published by CRC Press. This book was released on 2022-01-05 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral-filled polymer composites are increasingly used for various applications, including automotive, construction, biomedical, maritime, sport and ballistic, due to the advantages of low cost, light weight, excellent rigidity and high mechanical strength. One of two volumes comprising the Mineral-Filled Polymer Composites Handbook, this volume provides an overview of the latest research, trends, applications and future directions of advanced mineral fiber-reinforced polymer composites. It focuses specifically on material selection, processing and applications. This book: Emphasizes the principles governing the behavior of mineral-filled composite materials in the field of engineering and their applications Covers systematic material selection tools such as analytical hierarchy process (AHP), analytical network process (ANP), and technique of ranking preferences by similarity of the ideal solution (TOPSIS) Reviews the use of these materials for various engineering applications Features chapters looking at fabrication techniques and frictional properties Details current research in polymer nanocomposites and particulate polymer composites This book serves as an excellent reference guide for researchers, advanced students, academics and industry professionals interested in the synthesis of mineral-filled polymer and biopolymer composites, as well as those pursuing research in the broad fields of composite materials, polymers, organic/inorganic hybrid materials and nano-assembly.

Download or read book Polymer Clay Nanocomposites written by T. J. Pinnavaia and published by Wiley. This book was released on 2001-01-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-clay nanocomposites are formed through the union of two very different materials with organic and mineral pedigrees. The hybrid compositions, however, exhibit large increases in tensile strength, modulus, and heat distortion temperature as compared with the pristine polymer. The composites also have lower water sensitivity, reduced permeability to gases, and a similar thermal coefficient of expansion. All of these property improvements can be realized without a loss of clarity in the polymer. Further, it has been found that nanocomposites impart a level of flame retardance and UV resistance not present in the pure polymer. These improvements in performance properties at relatively low clay loading (typically 2 -10wt %) have stimulated intensive research in both industry and academia over the past decade. Polymer-Clay Nanocomposites presents the first comprehensive overview of the state of the art of these materials since they were first reported a decade ago. Covering both the theory and practical applications, this volume in the 'Wiley Series in Polymer Science' covers the key aspects of these important materials including: * Polymer-clay intercalates * The preparation and general properties of special practical and commercial significance (including strength, stiffness, toughness, permeability, fire retardation and chemical stability) * The elucidation of the structural and rheological factors influencing performance and processing properties Polymer-Clay Nanocomposites is an indispensable text for polymer scientists, composites formulators, materials engineers, resin producers, filters and additive producers as well as university lecturers, and organic and inorganic chemists working in this important and fascinating area.

Download or read book Metal Polymer Nanocomposites written by Luigi Nicolais and published by John Wiley & Sons. This book was released on 2004-11-11 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique guide to an essential area of nanoscience Interest in nano-sized metals has increased greatly due to theirspecial characteristics and suitability for a number of advancedapplications. As technology becomes more refined-including theability to effectively manipulate and stabilize metals at thenanoscale-these materials present ever-more workable solutions to agrowing range of problems. Metal-Polymer Nanocomposites provides the first guidesolely devoted to the unique properties and applications of thisessential area of nanoscience. It offers a truly multidisciplinaryapproach, making the text accessible to readers in physical,chemical, and materials science as well as areas such asengineering and topology. The thorough coverage includes: The chemical and physical properties of nano-sized metals Different approaches to the synthesis of metal-polymernanocomposites (MPN) Advanced characterization techniques and methods for study ofMPN Real-world applications, including color filters, polarizers,optical sensors, nonlinear optical devices, and more An extensive list of references on the topics covered A unique, cutting-edge resource for a vital area of nanosciencedevelopment, Metal-Polymer Nanocomposites is an invaluabletext for students and practitioners of materials science,engineering, polymer science, chemical engineering, electricalengineering, and optics.

Download or read book Handbook of Fillers written by George Wypych and published by Elsevier. This book was released on 2021-01-28 with total page 1185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Fillers, Fifth Edition discusses the rapidly advancing field of fillers, the substances added to plastics and composites that add value by improving and modifying the properties of materials and reducing costs. This new edition is an essential reference for engineers and scientists using fillers in a range of materials, including plastics, rubber, adhesives, and paper. Designed to be a comprehensive reference for both experienced practitioners and those new to the field, it covers available fillers and their properties, their effect on filled materials, their rheology and flammability, recycling considerations, and their use in practical applications. The book offers a direct comparison of general-purpose fillers (micron-size fillers) and nanofillers. The first section covers the grades of fillers available in the world market, dividing them into eight groups and analyzing their properties, applications, and sources. The second section discusses the effects of filler incorporation with ten chapters covering the mechanical properties of compounded materials, the effect of the filler on the material rheology, the morphology of the filled system, the material durability, flammability and recycling, the structure of interphase, chemical interphase, chemical interactions, interaction with and effect on other additive, fillers use in material compounds, and the analytical methods of testing fillers and filled materials. The final section is devoted to the application of fillers on an industrial scale. Filler transportation, storage, processing, and equipment used for these purposes are discussed, as are quality control of fillers, formulation with fillers, different processing methods, and health and safety issues. Synthesizes the literature on fillers, covering their properties, effects on filled materials, rheology, flammability, and more Provides up-to-date, applicable information on the use of fillers in plastics, rubber, adhesives, and paper Presents comprehensive coverage on the effect of fillers on materials, including their mechanical properties, their effects on material rheology, the morphology of the filled system, material durability, and more Includes essential guidance on the industrial scale use of fillers and their transportation, storage, processing, equipment, quality control, and health and safety considerations

Download or read book Mineral Filled Polymer Composites Handbook Two Volume Set written by Hanafi Ismail and published by CRC Press. This book was released on 2022-07-30 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral-filled polymer composites exhibit several advantages that make this material class attractive for a variety of applications, including their low cost, light weight, excellent rigidity, and high mechanical strength. Mineral-Filled Polymer Composites Handbook serves as a comprehensive overview of the latest research, trends, applications, and future directions of advanced mineral fiber-reinforced polymer composites. Comprised of 2 volumes: Mineral-Filled Polymer Composites: Perspective, Properties, and New Materials Mineral-Filled Polymer Composites: Selection, Processing, and Applications Presents details on processing, applications, and ageing of macro- to nanosized mineral reinforced polymer composites Examines fabrication techniques, novel synthesis methods, and mechanical behavior, thermal, flammability, and functional properties of a wide array of mineral filled polymer composite materials Covers a broad range of different research fields, including organic and inorganic filler used in the development of composites for various types of engineering applications Offers the latest developments in nano/micromineral-based polymer composites This book serves as an excellent reference guide for researchers, advanced students, academics, and industry professionals interested in the synthesis of mineral-filled polymer and biopolymer composites, as well as those pursuing research in the broad fields of composite materials, polymers, organic/inorganic hybrid materials, and nano-assembly.