Download or read book Industrial Radiology written by R. Halmshaw and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial radiography is a well-established non-destructive testing (NDT) method in which the basic principles were established many years ago. However, during 1993-95 the European Standards Organisa tion (CEN) commenced drafting many new standards on NDT including radiographic methods, and when completed these will replace national standards in all the EC member countries. In some cases these standards vary significantly from those in use in the UK at present. These CEN standards are accepted by majority, not unanimous voting, so they will become mandatory even in countries which vote against them. As most are likely to be legal by the time this second edition is published, they are described in the appropriate places in the text. The most important new technical development is the greater use of computers in radiology. In the first edition, computerized tomography was only briefly mentioned at the end of Chapter 11, as it was then largely a medical method with only a few equipments having found a place in industrial use. The method depends on a complex computer program and a large data store. Industrial equipments are now being built, although their spread into industry has been slow. Computer data storage is also being used for radiographic data. Small computers can now store all the data produced by scanning a radiographic film with a small light-spot, and various programs can be applied to these data.

Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.

Download or read book Radiation Source Use and Replacement written by National Research Council and published by National Academies Press. This book was released on 2008-05-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the United States there are several thousand devices containing high-activity radiation sources licensed for use in areas ranging from medical uses such as cancer therapy to safety uses such as testing of structures and industrial equipment. Those radiation sources are licensed by the U.S. Nuclear Regulatory Commission and state agencies. Concerns have been raised about the safety and security of the radiation sources, particularly amid fears that they could be used to create dirty bombs, or radiological dispersal device (RDD). In response to a request from Congress, the U.S. Nuclear Regulatory Commission asked the National Research Council to conduct a study to review the uses of high-risk radiation sources and the feasibility of replacing them with lower risk alternatives. The study concludes that the U.S. government should consider factors such as potential economic consequences of misuse of the radiation sources into its assessments of risk. Although the committee found that replacements of most sources are possible, it is not economically feasible in some cases. The committee recommends that the U.S. government take steps to in the near term to replace radioactive cesium chloride radiation sources, a potential "dirty bomb" ingredient used in some medical and research equipment, with lower-risk alternatives. The committee further recommends that longer term efforts be undertaken to replace other sources. The book presents a number of options for making those replacements.

Download or read book X Ray Imaging written by Harry E. Martz and published by CRC Press. This book was released on 2016-10-26 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on the medical applications of x-ray imaging exist, there is not one currently available that focuses on industrial applications. Full of color images that show clear spectrometry and rich with applications, X-Ray Imaging fills the need for a comprehensive work on modern industrial x-ray imaging. It reviews the fundamental science of x-ray imaging and addresses equipment and system configuration. Useful to a broad range of radiation imaging practitioners, the book looks at the rapid development and deployment of digital x-ray imaging system.

Download or read book Handbook of Industrial Radiology written by James Arnold Crowther and published by . This book was released on 1945 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Diagnostic X Ray Sources written by Rolf Behling and published by CRC Press. This book was released on 2021-04-18 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives an up-to-date summary of X-ray source design for applications in modern diagnostic medical imaging. Lays a sound groundwork for education and advanced training in the physics of X-ray production and X-ray interactions with matter. Includes a historical overview of X-ray tube and generator development, including key achievements leading up to the current technological and economic state of the field.

Download or read book Radiation Protection and Safety in Industrial Radiography written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information explaining the responsibilities of regulatory authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of enhancing radiation protection and safety.

Download or read book Industrial Radiology Techniques written by R. Halmshaw and published by Taylor & Francis. This book was released on 1971-01-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Radiology written by Ancel St. John and published by . This book was released on 1943 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Technical Diagnostics written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.

Download or read book X Ray CT written by Hiroyuki Toda and published by Springer Nature. This book was released on 2021-03-09 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides easy-to-understand explanations to systematically and comprehensively describe the X-ray CT technologies, techniques, and skills used for industrial and scientific purposes. Included are many references along with photographs, figures, and equations prepared by the author. These features all facilitate the reader's gaining a deeper understanding of the topics being discussed. The book presents expertise not only on fundamentals but also about hardware, software, and analytical methods for the benefit of technical users. The book targets engineers, researchers, and students who are involved in research, development, design, and quality assurance in industry and academia.

Download or read book Radiography in Modern Industry written by Eastman Kodak Company. Radiography Markets Division and published by . This book was released on 1969 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Safety Training Criteria for Industrial Radiography written by National Council on Radiation Protection and Measurements and published by Ncrp. This book was released on 1978 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lessons Learned from Accidents in Industrial Radiography written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report contains the findings of extensive research in terms of the lessons that can be learned from accidents which have occurred in industrial radiography, both in developed and developing countries. The review was carried out by a team of regulatory authorities, manufacturers and safety advisers. The objectives were to draw lessons from the initiating events of the accidents, the contributing factors and the consequences, and to identify several measures that, if implemented, would improve safety performance in industrial radiography.

Download or read book Industrial Radiology written by Ancel St. John and published by . This book was released on 1943 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of X ray Imaging written by Paolo Russo and published by CRC Press. This book was released on 2017-12-14 with total page 1477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing chapter contributions from over 130 experts, this unique publication is the first handbook dedicated to the physics and technology of X-ray imaging, offering extensive coverage of the field. This highly comprehensive work is edited by one of the world’s leading experts in X-ray imaging physics and technology and has been created with guidance from a Scientific Board containing respected and renowned scientists from around the world. The book's scope includes 2D and 3D X-ray imaging techniques from soft-X-ray to megavoltage energies, including computed tomography, fluoroscopy, dental imaging and small animal imaging, with several chapters dedicated to breast imaging techniques. 2D and 3D industrial imaging is incorporated, including imaging of artworks. Specific attention is dedicated to techniques of phase contrast X-ray imaging. The approach undertaken is one that illustrates the theory as well as the techniques and the devices routinely used in the various fields. Computational aspects are fully covered, including 3D reconstruction algorithms, hard/software phantoms, and computer-aided diagnosis. Theories of image quality are fully illustrated. Historical, radioprotection, radiation dosimetry, quality assurance and educational aspects are also covered. This handbook will be suitable for a very broad audience, including graduate students in medical physics and biomedical engineering; medical physics residents; radiographers; physicists and engineers in the field of imaging and non-destructive industrial testing using X-rays; and scientists interested in understanding and using X-ray imaging techniques. The handbook's editor, Dr. Paolo Russo, has over 30 years’ experience in the academic teaching of medical physics and X-ray imaging research. He has authored several book chapters in the field of X-ray imaging, is Editor-in-Chief of an international scientific journal in medical physics, and has responsibilities in the publication committees of international scientific organizations in medical physics. Features: Comprehensive coverage of the use of X-rays both in medical radiology and industrial testing The first handbook published to be dedicated to the physics and technology of X-rays Handbook edited by world authority, with contributions from experts in each field

Download or read book Real time Radiologic Imaging written by D. A. Garrett and published by ASTM International. This book was released on 1980 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: