Download or read book Safety critical Computer Systems written by Neil Storey and published by Addison Wesley Publishing Company. This book was released on 1996 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly microcomputers are being used in applications where their correct operation is vital to ensure the safety of the public and the environment: from anti-lock braking systems in automobiles, to fly-by-wire aircraft, to shut-down systems at nuclear power plants. It is, therefore, vital that engineers be aware of the safety implications of the systems they develop. This book is an introduction to the field of safety-critical computer systems written for any engineer who uses microcomputers within real-time embedded systems. It assumes no prior knowledge of safety, or of any specific computer hardware or programming language. This text is intended for both engineering and computer science students, and for practising engineers within computer related industries. The approach taken is equally suited to engineers who consider computers from a hardware, software or systems viewpoint.
Download or read book Protecting Industrial Control Systems from Electronic Threats written by Joseph Weiss and published by Momentum Press. This book was released on 2010 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at both the novice and expert in IT security and industrial control systems (ICS), this book will help readers gain a better understanding of protecting ICSs from electronic threats. Cyber security is getting much more attention and "SCADA security" (Supervisory Control and Data Acquisition) is a particularly important part of this field, as are Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), Intelligent Electronic Devices (IEDs), and all the other, field controllers, sensors, drives, and emission controls that make up the "intelligence" of modern industrial buildings and facilities. Some Key Features include: How to better understand the convergence between Industrial Control Systems (ICS) and general IT systems Insight into educational needs and certifications How to conduct Risk and Vulnerability Assessments Descriptions and observations from malicious and unintentional ICS cyber incidents Recommendations for securing ICS
Download or read book Advanced Industrial Control Technology written by Peng Zhang and published by William Andrew. This book was released on 2010-08-26 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control engineering seeks to understand physical systems, using mathematical modeling, in terms of inputs, outputs and various components with different behaviors. It has an essential role in a wide range of control systems, from household appliances to space flight. This book provides an in-depth view of the technologies that are implemented in most varieties of modern industrial control engineering. A solid grounding is provided in traditional control techniques, followed by detailed examination of modern control techniques such as real-time, distributed, robotic, embedded, computer and wireless control technologies. For each technology, the book discusses its full profile, from the field layer and the control layer to the operator layer. It also includes all the interfaces in industrial control systems: between controllers and systems; between different layers; and between operators and systems. It not only describes the details of both real-time operating systems and distributed operating systems, but also provides coverage of the microprocessor boot code, which other books lack. In addition to working principles and operation mechanisms, this book emphasizes the practical issues of components, devices and hardware circuits, giving the specification parameters, install procedures, calibration and configuration methodologies needed for engineers to put the theory into practice. - Documents all the key technologies of a wide range of industrial control systems - Emphasizes practical application and methods alongside theory and principles - An ideal reference for practicing engineers needing to further their understanding of the latest industrial control concepts and techniques
Download or read book Computer Based Industrial Control 2 e written by Kant and published by PHI Learning Pvt. Ltd.. This book was released on 2011-07-30 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition, this text presents the fundamentals of computer-based control of industrial processes. Intended primarily for undergraduate and postgraduate students of instrumentation and electronics engineering, the book will also be useful for professionals and researchers in these fields.
Download or read book Computer Information Systems and Industrial Management written by Khalid Saeed and published by Springer. This book was released on 2016-09-09 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 15th IFIP TC8 International Conference on Computer Information Systems and Industrial Management, CISIM 2016, held in Vilnius, Lithuania, in September 2016. The 63 regular papers presented together with 1 inivted paper and 5 keynotes in this volume were carefully reviewed and selected from about 89 submissions. The main topics covered are rough set methods for big data analytics; images, visualization, classification; optimization, tuning; scheduling in manufacturing and other applications; algorithms; decisions; intelligent distributed systems; and biometrics, identification, security.
Download or read book Distributed Computer Control Systems in Industrial Automation written by VijayP. Bhatkar and published by Routledge. This book was released on 2017-11-22 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference guide for professionals or text for graduate and postgraduate students, this volume emphasizes practical designs and applications of distributed computer control systems. It demonstrates how to improve plant productivity, enhance product quality, and increase the safety, reliability, and
Download or read book Mainframe Computer Systems written by Stephen H. Kaisler and published by Cambridge Scholars Publishing. This book was released on 2020-10-22 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes General Electric Corporation’s venture into developing second and third generation mainframe computer systems. The General Electric Corporation (GE), which began its life as the Edison Electric Co., was long involved in electrical appliances and industrial machines. It was also a founder of the Radio Corporation of America, which eventually became one of its competitors, and developed many electrical systems in order to control different types of industrial machines. Its breakthrough into computing came with its winning bid to provide the computing systems for the Electronic Recording Method of Accounting) system developed for the Bank of America by the Stanford Research Institute. The success of this project led GE to develop the GE-200 series which was the foundation for commercial timesharing. The GE-235 was selected by Dartmouth for its Dartmouth Time Sharing System (DTSS), an innovative academic time-sharing system. BASIC was developed on the GE-235 computer system under DTSS. GE enhanced it to develop its Mark II/III Time Sharing System, apparently the first commercial time sharing service in the world. GE develop the GE-300/-400 systems for industrial process control. The GE-600 series replaced the GE-200 series and demonstrated innovation in time-sharing systems. The GE-645 was selected to host Multics, which was developed by MIT. However, GE felt that it could not compete in computing against IBM, Univac, and other mainframes competitors, so it folded its tent and sold its Computer Division to Honeywell, Inc. Nevertheless, GE will be remembered for many innovations which continue to be used in modern computing systems.
Download or read book U S Industrial Outlook written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents industry reviews including a section of "trends and forecasts," complete with tables and graphs for industry analysis.
Download or read book The Industrial Reorganization Act The computer industry written by United States. Congress. Senate. Committee on the Judiciary. Subcommittee on Antitrust and Monopoly and published by . This book was released on 1973 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances and Applications in Computer Science Electronics and Industrial Engineering written by Jyrki Nummenmaa and published by Springer Nature. This book was released on 2019-10-23 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Conference on Computer Science, Electronics and Industrial Engineering (CSEI 2019), held in Ambato in October 2019, with participants from 13 countries and guest speakers from Chile, Colombia, France, Japan, Spain, Portugal, and United States. Featuring 23 peer-reviewed papers, it discusses topics such as the use of metaheuristic for non-deterministic problem solutions, software architectures for supporting e-government initiatives, and the use of electronics in e-learning and industrial environments. It also includes contributions illustrating how new approaches on these converging research areas are impacting the development of human societies around the world into Society 5.0. As such, it is a valuable resource for scholars and practitioners alike.
Download or read book Computer Networks written by Andrzej Kwiecien and published by Springer Science & Business Media. This book was released on 2009-06-07 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuous and very intense development of IT has resulted in the fast development of computer networks. Computer networks, as well as the entire ?eldofIT,aresubjectto constantchangestriggeredbythegeneraltechnological advancement and the in?uence of new IT technologies.These methods and tools of designing and modeling computer networks are becoming more advanced. Above all, the scope of their application is growing thanks to, for example, the results of new research and because of new proposals of application, which not long ago were not even taken into consideration. These new applications stimulate the development of scienti?c research, as the broader application of system solutions based on computer networks results in a wide range of both theoretical and practical problems. This book proves that and the contents of its chapters concern a variety of topics and issues. Generally speaking, the contents can be divided into several subject groups. The ?rst group of contributions concerns new technologies applied in computer networks,particularlythoserelatedto nano,molecularandquantumtechnology.
Download or read book IEC 61131 3 Programming Industrial Automation Systems written by Karl-Heinz John and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: IEC 61131-3 gives a comprehensive introduction to the concepts and languages of the new standard used to program industrial control systems. A summary of the special programming requirements and the corresponding features in the IEC 61131-3 standard make it suitable for students as well as PLC experts. The material is presented in an easy-to-understand form using numerous examples, illustrations, and summary tables. There is also a purchaser's guide and a CD-ROM containing two reduced but functional versions of programming systems.
Download or read book Automation Production Systems and Computer integrated Manufacturing written by Mikell P. Groover and published by Prentice Hall. This book was released on 2008 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exploration of the technical and engineering aspects of automated production systems provides a comprehensive and balanced coverage of the subject. It covers cutting-edge technologies of production automation and material handling, and how these technologies are used to construct modern manufacturing systems.
Download or read book Distributed Embedded Control Systems written by Matjaž Colnaric and published by Springer Science & Business Media. This book was released on 2007-11-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating new work comes complete with more than 100 illustrations and a detailed practical prototype. It explores the domains encountered when designing a distributed embedded computer control system as an integrated whole. Basic issues about real-time systems and their properties, especially safety, are examined first. Then, system and hardware architectures are dealt with, along with programming issues, embodying desired properties, basic language subsets, object orientation and language support for hardware and software specifications.
Download or read book Computerworld written by and published by . This book was released on 1977-09-05 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 40 years, Computerworld has been the leading source of technology news and information for IT influencers worldwide. Computerworld's award-winning Web site (Computerworld.com), twice-monthly publication, focused conference series and custom research form the hub of the world's largest global IT media network.
Download or read book Industrial Internet of Things and Cyber physical Systems written by Pardeep Kumar and published by Engineering Science Reference. This book was released on 2020 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores recent advances in the development, implementation, and business impact of IoT technologies on sustainable societal development and improved life quality"--
Download or read book Computerworld written by and published by . This book was released on 1981-02-09 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 40 years, Computerworld has been the leading source of technology news and information for IT influencers worldwide. Computerworld's award-winning Web site (Computerworld.com), twice-monthly publication, focused conference series and custom research form the hub of the world's largest global IT media network.
