Download or read book In Situ Spectroscopy of Monomer and Polymer Synthesis written by Judit E. Puskas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of selected papers presented at the symposium titled "In situ Spectroscopy in Monomer and Polymer Synthesis," held at the April, 2001 ACS National Meeting in San Diego, California, USA. The co-organizers of this symposium were Timothy Long, Judit E. Puskas, Robson F. Storey, and J. Andrews. In situ spectroscopic monitoring is gaining popularity both in academia and industry. FfIR monitoring is used most frequently, but UV-visible, raman, and NMR spectroscopy are also important. This book concentrates mostly on FfIR monitoring, both in the near and mid-infrared ranges. The first chapter is a short general overview of FfIR spectroscopy, followed by the symposium contribu tions. We thought that this would be especially useful for student readers. We hope that the book will present a state-of-the-art overview of research related to in situ spectroscopic monitoring. -Judit E. Puskas ix Acknowledgments This book would not have been possible without the dedicated effort of the chapter contributors and the symposium committee: Professor Judit E. Puskas Professor Timothy Long Professor Robson F. Storey Professor J. Andrews The symposium was financially supported by: ACS-Petroleum Research Fund REMSPEC Co. Wyatt Technology Co.

Download or read book Polymer Nanocomposites written by Yiu-Wing Mai and published by Woodhead Publishing. This book was released on 2006-02-28 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are polymer matrices reinforced with nano-scale fillers. This new class of composite materials has shown enhanced optical, electrical and dielectric properties. This important book begins by examining the characteristics of the main types of polymer nanocomposites and then reviews their diverse applications.Part one focuses on polymer/nanoparticle composites, their synthesis, optical properties and electrical conductivity. Part two describes the electrical, dielectric and thermal behaviour of polymer/nanoplatelet composites, whilst polymer/nanotube composites are the subject of Part three. The processing and industrial applications of these nanocomposite materials are discussed in Part four, including uses in fuel cells, bioimaging and sensors as well as the manufacture and applications of electrospun polymer nanocomposite fibers, nanostructured transition metal oxides, clay nanofiller/epoxy nanocomposites, hybrid epoxy-silica-rubber nanocomposites and other rubber-based nanocomposites.Polymer nanocomposites: physical properties and applications is a valuable reference tool for both the research community and industry professionals wanting to learn about these materials and their applications in such areas as fuel cell, sensor and biomedical technology. - Gives a comprehensive review of polymer nanocomposites and their properties - A standard reference on this area - Written by distinguished editors and a international team of authors

Download or read book Thermal Analysis of Polymeric Materials written by Krzysztof Pielichowski and published by John Wiley & Sons. This book was released on 2022-06-01 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: An all-in-one reference work covering the essential principles and techniques on thermal behavior and response of polymeric materials This book delivers a detailed understanding of the thermal behavior of polymeric materials evaluated by thermal analysis methods. It covers the most widely applied principles which are used in method development to substantiate what happens upon heating of polymers. It also reviews the key application areas of polymers in materials science. Edited by two experts in the field, the book covers a wide range of specific topics within the aforementioned categories of discussion, such as: Crucial thermal phenomena - glass transition, crystallization behavior and curing kinetics Polymeric materials that have gained considerable interest over the last decade The latest advancements in techniques related to the field, such as modulated temperature DSC and fast scanning calorimetry The recent advances in hyphenated techniques and their applications Polymer chemists, chemical engineers, materials scientists, and process engineers can use this comprehensive reference work to gain clarity on the topics discussed within and learn how to harness them in practical applications across a wide range of disciplines.

Download or read book Nanomanufacturing Handbook written by Ahmed Busnaina and published by CRC Press. This book was released on 2017-12-19 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Breakthroughs in nanotechnology have been coming at a rapid pace over the past few years. This was fueled by significant worldwide investments by governments and industry. But if these promising young technologies cannot begin to show commercial viability soon, that funding is in danger of disappearing as investors lose their appetites and the economic and scientific promise of nanotechnology may not be realized. Scrutinizing the barriers to commercial scale-up of nanotechnologies, the Nanomanufacturing Handbook presents a broad survey of the research being done to bring nanotechnology out of the laboratory and into the factory. Current research into nanotechnology focuses on the underlying science, but as this forward-looking handbook points out, the immediate need is for research into scale-up, process robustness, and system integration issues. Taking that message to heart, this book collects cutting-edge research from top experts who examine such topics as surface-programmed assembly, fabrication and applications of single-walled carbon nanotubes (SWNTs) including nanoelectronics, manufacturing nanoelectrical contacts, room-temperature nanoimprint and nanocontact technologies, nanocontacts and switch reliability, defects and surface preparation, and other innovative, application-driven initiatives. In addition to these technical issues, the author provides a survey of the current state of nanomanufacturing in the United States—the first of its kind—and coverage also reaches into patenting nanotechnologies as well as regulatory and societal issues. With timely, authoritative coverage accompanied by numerous illustrations, the Nanomanufacturing Handbook clarifies the current challenges facing industrial-scale nanotechnologies and outlines advanced tools and strategies that will help overcome them.

Download or read book Spectroscopy of Polymer Nanocomposites written by Sabu Thomas and published by William Andrew. This book was released on 2016-02-16 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy of Polymer Nanocomposites covers all aspects of the spectroscopic characterization of polymer nanocomposites. More than 25 spectroscopy characterization techniques – almost all used in materials science – are treated in the book, with discussion of their potentialities and limitations. By comparing the techniques with each other and presenting the techniques together with their specific application areas, the book provides scientists and engineers the information needed for solving specific problems and choosing the right technique for analyzing the material structure. From this, the dispersion structure of fillers, property relations and filler-polymer interactions can be determined, and, ultimately, the right materials can be chosen for the right applications. Besides the techniques and structure-property relations, aspects covered include: phase segregation of filler particles, filler agglomeration and deagglomeration, filler dispersion, filler-polymer interactions, surfaces and interfaces. The book also examines recent developments, as well as unresolved issues and new challenges, in the characterization of surfaces and interfaces in polymer nanocomposites. This handpicked selection of topics, and the combined expertise of contributors from industry, academia, government and private research organizations across the globe, make this survey an outstanding reference source for anyone involved in the field of polymer nanocomposites in academia or industry. - Provides comprehensive coverage of spectroscopy techniques for analyzing polymer nanocomposites - Enables researchers and engineers to choose the right technique and make better materials decisions in research and a range of industries - Presents the fundamentals, information on structure-property relations, and all other aspects relevant for understanding spectroscopic analyses of nanoreinforced polymers and their applications

Download or read book Imidic Polymers and Green Polymer Chemistry written by Andreea Irina Barzic and published by CRC Press. This book was released on 2021-03-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the latest research, development, and future potential of polyimides and green polymer chemistry. It combines the major interdisciplinary research in this area. Polymers with imidic structure, known as polyimides, are widely investigated owing to their practical implications in numerous industrial sectors. The book explains why polyimides offer versatility unparalleled in comparison to most other classes of macromolecules. In addition, developments in green polymer chemistry in this area have been stimulated by health and environmental concerns, interest in sustainability, desire to decrease the dependence on petroleum, and opportunities to design and produce “green” products and processes. Major advances include new uses of green processing methodologies, and green polymeric products. Imidic Polymers and Green Polymer Chemistry: New Technology and Developments in Process and Product is targeted to scientists, engineers, and students who are involved or interested in green polymer chemistry and imidic polymers. This book will serve as a valuable reference for those with an interest in synthesis of polyimides and the chemistry and physical chemistry of polyimide compounds.

Download or read book Molecularly Imprinted Polymers Path to Artificial Antibodies written by Santanu Patra and published by Springer Nature. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Functional Materials written by Mario Leclerc and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-10-10 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Functional Materials textbook is not simply a review of the vast body of literature of the recent years, as it holds the focus upon various aspects of application. Moreover, it selects only a few topics in favor of a solid and thorough treatment of the relevant aspects. This book comes in a good time, when a large body of academic literature has been accumulated and is waiting for a critical inspection in the light of the real demands of application." Professor Gerhard Wegner, Max-Planck Institute for Polymer Research, Mainz, Germany The chapters cover three important fields in the development of functional materials: energy, environment, and biomedical applications. These topics are explained and discussed from both an experimental and a theoretical perspective. Functional organic and inorganic materials are at the center of most technological breakthroughs. Therefore, the understanding of material properties is fundamental to the development of novel functionalities and applications.

Download or read book Microreactors in Preparative Chemistry written by Wladimir Reschetilowski and published by John Wiley & Sons. This book was released on 2013-09-13 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book in the field to focus on these aspects, providing extremely valuable information unavailable elsewhere for anyone seeking the practical application of microreactor technology in preparative chemistry. The topics covered branch out in three different directions. To begin with, the knowledge necessary for the preparative chemistry concerning the influence of the so-called microeffects on the reaction procedure and on mass and heat transfer as well as the surface phenomena are provided in detail. Next, practical aspects of the synthesis of various basic chemicals and fine chemicals, polymers, bioproducts and nanoparticles are discussed, including important advice for both the researcher and industrial chemist. Finally, reaction examples in microreactors whose reaction guidance are best understood are given together with universally applicable correlations as well as modeling approaches and transfer potential on related reaction systems. With its specific instructions, tips and experimental procedures for product syntheses as well as the inclusion of both the technical and theoretical background this is a must-have for beginners and experts alike working in this emerging field.

Download or read book Monitoring Polymerization Reactions written by Wayne F. Reed and published by John Wiley & Sons. This book was released on 2014-01-21 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers new strategies to optimize polymer reactions With contributions from leading macromolecular scientists and engineers, this book provides a practical guide to polymerization monitoring. It enables laboratory researchers to optimize polymer reactions by providing them with a better understanding of the underlying reaction kinetics and mechanisms. Moreover, it opens the door to improved industrial-scale reactions, including enhanced product quality and reduced harmful emissions. Monitoring Polymerization Reactions begins with a review of the basic elements of polymer reactions and their kinetics, including an overview of stimuli-responsive polymers. Next, it explains why certain polymer and reaction characteristics need to be monitored. The book then explores a variety of practical topics, including: Principles and applications of important polymer characterization tools, such as light scattering, gel permeation chromatography, calorimetry, rheology, and spectroscopy Automatic continuous online monitoring of polymerization (ACOMP) reactions, a flexible platform that enables characterization tools to be employed simultaneously during reactions in order to obtain a complete record of multiple reaction features Modeling of polymerization reactions and numerical approaches Applications that optimize the manufacture of industrially important polymers Throughout the book, the authors provide step-by-step strategies for implementation. In addition, ample use of case studies helps readers understand the benefits of various monitoring strategies and approaches, enabling them to choose the best one to match their needs. As new stimuli-responsive and "intelligent" polymers continue to be developed, the ability to monitor reactions will become increasingly important. With this book as their guide, polymer scientists and engineers can take full advantage of the latest monitoring strategies to optimize reactions in both the lab and the manufacturing plant.

Download or read book Advanced Aspects of Spectroscopy written by Muhammad Akhyar Farrukh and published by BoD – Books on Demand. This book was released on 2012-08-29 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy is the study of absorption and emission of electromagnetic radiation due to the interaction between matter and energy that energy depends on the specific wavelength of electromagnetic radiation. This field has proven invaluable research tool in a number of areas including chemistry, physics, biology, medicine and ecology. The spectroscopic field of research is growing day-by-day and scientists are exploring new areas in this field by introducing new techniques. The main purpose of this book is to highlight these new spectroscopic techniques like Magnetic Induction Spectroscopy, Laser-Induced Breakdown Spectroscopy, X-ray Photoelectron Spectroscopy, Low Energy Electron Loss Spectroscopy, Micro- to Macro-Raman Spectroscopy, Liquid-Immersion Raman Spectroscopy, High-Resolution Magic Angle Spinning (HR-MAS) Nuclear Magnetic Resonance (NMR) Spectroscopy, Injection and Optical Spectroscopy, and Nano Spectroscopy. This book is divided into five sections including General Spectroscopy, Advanced Spectroscopy, Nano Spectroscopy, Organic Spectroscopy, and Physical Spectroscopy which cover topics from basic to advanced levels which will provide a good source of learning for teaching and research purposes.

Download or read book Polymeric Materials Encyclopedia Twelve Volume Set written by Joseph C. Salamone and published by CRC Press. This book was released on 2020-07-17 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Polymeric Materials Encyclopedia presents state-of-the-art research and development on the synthesis, properties, and applications of polymeric materials. This groundbreaking work includes the largest number of contributors in the world for a reference publication in polymer science, and examines many fields not covered in any other reference. With multiple articles on many subjects, the encyclopedia offers you a broad-based perspective on a multitude of topics, as well as detailed research information, figures, tables, illustrations, and references. Updates published as new research unfolds will continue to provide you with the latest advances in polymer science, and will keep the encyclopedia at the forefront of the field well into the future. From novices to experienced researchers in the field, anyone and everyone working in polymer science today needs this complete assessment of the state of the art. The entire 12-volume set will be available in your choice of printed or CD-ROM format.

Download or read book Encyclopedia of Interfacial Chemistry written by and published by Elsevier. This book was released on 2018-03-29 with total page 5276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Seven Volume Set summarizes current, fundamental knowledge of interfacial chemistry, bringing readers the latest developments in the field. As the chemical and physical properties and processes at solid and liquid interfaces are the scientific basis of so many technologies which enhance our lives and create new opportunities, its important to highlight how these technologies enable the design and optimization of functional materials for heterogeneous and electro-catalysts in food production, pollution control, energy conversion and storage, medical applications requiring biocompatibility, drug delivery, and more. This book provides an interdisciplinary view that lies at the intersection of these fields. Presents fundamental knowledge of interfacial chemistry, surface science and electrochemistry and provides cutting-edge research from academics and practitioners across various fields and global regions

Download or read book Materials Science written by Yitzhak Mastai and published by BoD – Books on Demand. This book was released on 2013-06-10 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today modern materials science is a vibrant, emerging scientific discipline at the forefront of physics, chemistry, engineering, biology and medicine, and is becoming increasingly international in scope as demonstrated by emerging international and intercontinental collaborations and exchanges. The overall purpose of this book is to provide timely and in-depth coverage of selected advanced topics in materials science. Divided into five sections, this book provides the latest research developments in many aspects of materials science. This book is of interest to both fundamental research and also to practicing scientists and will prove invaluable to all chemical engineers, industrial chemists and students in industry and academia.

Download or read book Australian Journal of Chemistry written by and published by . This book was released on 2002 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Conjugated Polymers for Next Generation Applications Volume 1 written by Vijay Kumar and published by Woodhead Publishing. This book was released on 2022-06-24 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conjugated Polymers for Next-Generation Applications, Volume One: Synthesis, Properties and Optoelectrochemical Devices describes the synthesis and characterization of varied conjugated polymeric materials and their key applications, including active electrode materials for electrochemical capacitors and lithium-ion batteries, along with new ideas of functional materials for next-generation high-energy batteries, a discussion of common design procedures, and the pros and cons of conjugated polymers for certain applications. The book's emphasis lies in the underlying electronic properties of conjugated polymers, their characterization and analysis, and the evaluation of their effectiveness for utilization in energy and electronics applications. This book is ideal for researchers and practitioners in the area of materials science, chemistry and chemical engineering. - Provides an overview of the synthesis and functionalization of conjugated polymers and their composites - Reviews important photovoltaics applications of conjugated polymeric materials, including their use in energy storage, batteries and optoelectronic devices - Discusses conjugated polymers and their application in electronics for sensing, bioelectronics, memory, and more

Download or read book Corrosion Preventive Materials and Corrosion Testing written by S.K. Dhawan and published by CRC Press. This book was released on 2020-03-02 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an extensive coverage of conjugated polymer based nano-composite coatings with advanced anti-corrosive properties. The book gives detailed explanation of corrosion testing methods and techniques to evaluate the corrosion resistance of the coatings. It includes elaborate discussion on classification of corrosion, electrochemistry of corrosion process, theories explaining the mechanism of corrosion and various corrosion testing standards. Electrochemical studies like open circuit potential (OCP) variation with time, potentiodynamic polarization, Electrochemical Impedance Spectroscopy (EIS) and accelerated corrosion testing are highlighted as important tools to extract information about the behavior of coatings under corrosive conditions. The book discusses epoxy-conjugated polymer based novel composite coating formulations, including aniline and o-toluidine, o-anisidine, phenetidine and pentafluoroaniline with appropriate fillers like SiO2, flyash, ZrO2 nanoparticles, and chitosan for the protection of metallic substrates. A general discussion on the self healing mechanism of epoxy-polypyrrole based biopolymer hybrid composite coatings is included in this book. This book provides a critical review on the conjugated polymer based composite coatings with superior corrosion resistance, good mechanical integrity, better adhesion properties and self healing ability under highly aggressive conditions which can be commercially used for the protection of metal substrates from corrosion.