Download or read book Cone Penetration Testing 2018 written by Michael A. Hicks and published by CRC Press. This book was released on 2018-06-13 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cone Penetration Testing 2018 contains the proceedings of the 4th International Symposium on Cone Penetration Testing (CPT’18, Delft, The Netherlands, 21-22 June 2018), and presents the latest developments relating to the use of cone penetration testing in geotechnical engineering. It focuses on the solution of geotechnical challenges using the cone penetration test (CPT), CPT add-on measurements and companion in-situ penetration tools (such as full flow and free fall penetrometers), with an emphasis on practical experience and application of research findings. The peer-reviewed papers have been authored by academics, researchers and practitioners from many countries worldwide and cover numerous important aspects, ranging from the development of innovative theoretical and numerical methods of interpretation, to real field applications. This is an Open Access ebook, and can be found on www.taylorfrancis.com.
Download or read book In Situ Testing Methods in Geotechnical Engineering written by Alan J. Lutenegger and published by CRC Press. This book was released on 2021-05-03 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Situ Testing Methods in Geotechnical Engineering covers the field of applied geotechnical engineering related to the use of in situ testing of soils to determine soil properties and parameters for geotechnical design. It provides an overview of the practical aspects of the most routine and common test methods, as well as test methods that engineers may wish to include on specific projects. It is suited for a graduate-level course on field testing of soils and will also aid practicing engineers. Test procedures for determining in situ lateral stress, strength, and stiffness properties of soils are examined, as is the determination of stress history and rate of consolidation. Readers will be introduced to various approaches to geotechnical design of shallow and deep foundations using in situ tests. Importantly, the text discusses the potential advantages and disadvantages of using in situ tests.
Download or read book Guidelines for Cone Penetration Test written by United States. Federal Highway Administration. Implementation Division and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents procedures and guidelines applicable to the use of the cone penetration test. It represents the author's interpretation of the state-of-the-art in Dutch static cone testing as of February 1977. Its contents should provide assistance and uniformity to engineers concerned with the interpretation of the data obtained from such testing. Only geotechnical engineers familiar with the fundamentals of soil mechanics and foundation engineering should use this manual. The manual includes: Introduction and review of the general principals concerning cone penetrometer testing. Individual design chapters which address topics such as: pile design, shear strength estimation, settlement calculation and compaction control; and Appendices which present previously published, pertinent information on cone penetrometer testing.
Download or read book Cone Penetration Testing in Geotechnical Practice written by T. Lunne and published by CRC Press. This book was released on 2002-09-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on the specification, performance, use and interpretation of the Electric Cone Penetration Test (CPU), and in particular the Cone Penetration Test with pore pressure measurement (CPTU) commonly referred to as the "piezocone test".
Download or read book Piezocone and Cone Penetration Test CPTu and CPT Applications in Foundation Engineering written by Abolfazl Eslami and published by Butterworth-Heinemann. This book was released on 2019-11-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezocone and cone penetration tests (CPTu and CPT) applications in foundation engineering includes different approaches for determining the bearing capacity of shallow foundations, along with methods for determining pile bearing capacity and settlement concepts. The use of soft computing (GMDH) neural networks related to CPT records and Geotechnical parameters are also discussed. In addition, different cases regarding the behavior of foundation performance using case records, such as shallow foundation, deep soil improvement, soil behavior classification (SBC), and bearing capacity are also included. - Provides the latest on CPT and CPTu performance in geotechnical engineering, i.e., bearing capacity, settlement, liquefaction, soil classification and shear strength prediction - Introduces soft computing methods for processing soil properties and pile bearing capacity via CPT and CPTu - Explains CPT and CPTu testing methods which allows for the continuous, or virtually continuous, record of ground conditions
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Canadian Foundation Engineering Manual written by Canadian Geotechnical Society and published by Richmond, B.C. : Canadian Geotechnical Society. This book was released on 1992 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cone Penetration Testing written by Paul W. Mayne and published by Transportation Research Board. This book was released on 2007 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: NCHRP synthesis 368 explores the current practices of departments of transportation associated with cone penetration testing (CPT). The report examines cone penetrometer equipment options; field testing procedures; CPT data presentation and geostratigraphic profiling; CPT evaluation of soil engineering parameters and properties; CPT for deep foundations, pilings, shallow foundations, and embankments; and CPT use in ground modifications and difficult ground conditions.
Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.
Download or read book Cone Penetrometer Comparison Testing written by James A. Schneider and published by . This book was released on 2011 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: A total of 61 cone penetration tests were performed at 14 sites in the state of Wisconsin. Data reinforced conclusions from practice in Minnesota and previously performed test programs related to the Marquette Interchange and Mitchell interchange project that use of the CPT can be successful in glacial geologies. Within in this study CPTs were performed to depths in excess of 75 feet in alluvial deposits, outwash, and lacustrine soils. Difficulties were encountered in clay tills and fill placed for highway structures. However, previous experience in Milwaukee by commercial CPT operators had success in clayey tills of eastern Wisconsin.
Download or read book The Penetrometer and Soil Exploration written by G. Sanglerat and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Penetrometer and Soil Exploration: Interpretation of Penetration Diagrams—Theory presents the many uses of the penetrometer for investigating soil conditions. Testing methods include the following: (1) in situ load tests on full-scale foundations; (2) laboratory testing of undisturbed samples, and (3) in situ testing of soils. The book regards the advantages of using the penetrometer as a handy tool in drilling and sampling. The text emphasizes that the investigator should never rely entirely on the analogy or the extrapolation of information pertaining to a nearby site. The text describes the different shapes of the penetrometer diagrams obtained from tests in homogeneous cohesionless soil, as well as the significance of the embedment of a pile into the bearing stratum for deep foundation designs. The paper discusses the De Beer theory, Kerisel's theory, and the theory developed at the Delft Laboratory of Soil Mechanics. The laboratory determines the maximum soil pressure and the corresponding embedment of the pile. According to Professor L'Herminier, "the bearing capacity of a pile may be determined...from laboratory tests on soil samples, the other by extrapolating penetrometer data." The book is suitable for structural engineers, civil engineers, geologists, architects, and students of soil mechanics.
Download or read book Cone Penetration Testing written by A. C. Meigh and published by Elsevier. This book was released on 2013-10-22 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cone Penetration Testing: Methods and Interpretation discusses the history, applications, and development of the cone penetration test procedures and related test procedures. The book is divided into two parts. Part 1 deals with the cone penetration test proper – its general and historical outline, equipment and their accuracy and calibration, the use of the test results, and its parameters in different kinds of soils and materials. Part 2 covers the role and use of piezocones and its use for the assessment of soil. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.
Download or read book Site Investigation Requirements for Dredging Works written by Permanent International Association of Navigation Congresses. Permanent Technical Committee II. Working Group No. 23 and published by PIANC. This book was released on 2000 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Comprehensive Database of Tests on Axially Loaded Piles Driven in Sand written by Zhongxuan Yang and published by Academic Press. This book was released on 2015-11-11 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Database of Tests on Axially Loaded Driven Piles in Sands reviews the critical need to develop better load-test databases for piles driven in sands. The key quality parameters, population of current entries and reporting formats are described before offering preliminary results obtained from comparisons between axial capacities calculated by various predictive approaches and site measurements. This book also shows that the "simplified" and "offshore" ICP and UWA variants proposed by some practitioners are over-conservative and that their use could be discontinued. The new pile capacity and stiffness database offers a broad scope for evaluating potential prediction biases relating to a wide range of soil and pile parameters. Submission of further high quality tests for inclusion in regularly updated versions is encouraged. - Presents a comprehensive and updated database for piles driven in predominantly silica sands - Features reviews of the design procedures for driven piles in sand - Assesses the performance of various mainstreams design procedures applied for piles driven in sand - Provides comprehensive information of case histories of pile load tests
Download or read book Cone Penetration Testing 2018 written by Michael A. Hicks and published by CRC Press. This book was released on 2018-06-13 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cone Penetration Testing 2018 contains the proceedings of the 4th International Symposium on Cone Penetration Testing (CPT’18, Delft, The Netherlands, 21-22 June 2018), and presents the latest developments relating to the use of cone penetration testing in geotechnical engineering. It focuses on the solution of geotechnical challenges using the cone penetration test (CPT), CPT add-on measurements and companion in-situ penetration tools (such as full flow and free fall penetrometers), with an emphasis on practical experience and application of research findings. The peer-reviewed papers have been authored by academics, researchers and practitioners from many countries worldwide and cover numerous important aspects, ranging from the development of innovative theoretical and numerical methods of interpretation, to real field applications. This is an Open Access ebook, and can be found on www.taylorfrancis.com.
Download or read book Engineering Guidelines for the Evaluation of Hydropower Projects written by United States. Office of Hydropower Licensing and published by . This book was released on 1991 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FHWA Research and Development Implementation Catalog written by United States. Federal Highway Administration. Implementation Division and published by . This book was released on 1979 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
