Download or read book Flooring written by Department of Health: Estates and Facilities Division and published by The Stationery Office. This book was released on 2006-05-09 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication sets out guidance on the technical design and output specifications of flooring in healthcare buildings, and although it is mainly concerned with new building work, the information is also applicable to the renewal of flooring in existing buildings.

Download or read book The BPG Building Fabric Component Life Manual written by Building Performance Group Ltd, and published by CRC Press. This book was released on 2023-08-11 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides a comprehensive source of building component life-span and maintenance data for commercial and industrial building components, following the same format as the ground-breaking HAPM Component Life Manual for domestic buildings. Each building component is allocated its own data sheet on which a number of generic descriptions are provided together with assessed life-spans and maintenance requirements. References to the relevant standards and codes of practice are also included.

Download or read book Principles of Element Design written by Peter Rich and published by Routledge. This book was released on 2012-10-02 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of buildings is learnt through experience and the inheritance of a tradition in forming buildings over several thousand years. Successful construction learns from this experience which becomes embodied in principles of application. Though materials and techniques change, various elements have to perform the same function. 'Principles of Element Design' identifies all the relevant elements and then breaks these elements down into all their basic constituents, making it possible for students to fully understand the given theory and principles behind each part. As all building projects are subject to guidance through the Building Regulations and British Standards, this book gives an immediate reference back to relevant information to help practitioners and contractors identify key documents needed. Yvonne Dean B.A. (Hons) B.A (Open) RIBA, an architect, energy consultant and materials technologist. She also has 15 years experience as a lecturer, travels widely and is a guest lecturer at many universities. She pioneered an access course for Women into Architecture and Building, which has been used as a template by others, and has been instrumental in helping to change the teaching of technology for architects and designers. Peter Rich AA Dipl. (Hons) Architect, started his career with 14 years experience as a qualified architectural technician. He then joined the AA School of Architecture, working with Bill Allen and John Bickerdike after his graduation, later becoming a partner of Bickerdike Allen Rich and Partners. He also taught building construction at the Bartlett School of Architecture, University College London, and architectural design at the Polytechnic of North London. He now acts as a Consultant.

Download or read book Design For Maintainability Benchmarks For Quality Buildings written by Yit Lin Michael Chew and published by World Scientific Publishing Company. This book was released on 2018-03-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the motto of 'doing it right the first time', this book focuses on spearheading the integration of designers, constructors and Facility Management, by providing easy-to-read tables summarising knowledge learned from past mistakes and maintainability benchmarks. Based on the predictive/preventive approach, the tables serve to define acceptable standards in design, construction and operation practices, to ensure the standard and quality of design, construction and maintenance practices for high maintainability at the outset of the planning/design stage. The text covers technical issues related to major components of a facility for basements, wet areas, façades, common areas, roofs and M&E.Related Link(s)

Download or read book Tunnel Lining Design Guide written by British Tunnelling Society and published by Thomas Telford. This book was released on 2004 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of geotechnical and geophysical -- pr) operies 160 -- 10.3 4 Design of tunnel linings 1 61 -- 10.4 Instrumentation of the CTRL North Downs Tunnel 164 -- 10.5 References 165 -- Appendix I Abbreviations and symbols 166 -- Appendix 2 Risk management 168 -- A2l Introduction 168 -- A2.2 Scope 168 -- A23 Risk register 169 -- A21. 1 When to use the risk register 169 -- A2.32 Whalt is it? 169 -- A2.3.3 Assessment process 169 -- A2.3.4 Key steps 169 -- A2.3.5 Risk assessment, qualitative or -- quantitative? 171 -- A2.3.6 R anaingt risk 175 -- A2.4 References 17.

Download or read book Standards for Fresh Concrete written by Tom Harrison and published by BSI British Standards Institution. This book was released on 2004-02-27 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement and concrete technology, Concretes, Construction materials, Concrete mixes, Curing (concrete), Aggregates, Production, Grades (quality), Performance, Performance testing, Conformity, Quality control, Inspection, Verification, Composition, Delivery, Compressive strength, Building and Construction

Download or read book HAPM Component Life Manual written by Hapm Publications Ltd. and published by CRC Press. This book was released on 2020-10-28 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication breaks new ground. It is the first document to provide extensive life-span assessments (for insurance purposes) for a wide range of building components which are classified within the concept of quality specifications. A further benefit is that it does not seek to be prescriptive. It indicative 'benchmarks' against which new or differing specifications can be assessed, in that sense it is both robust and flexible.

Download or read book Appraisal and Repair of Reinforced Concrete written by Robert Holland and published by Thomas Telford. This book was released on 1997 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on appraisal and repair of reinforced concrete building structures. It addresses the problems related to reinforced concrete, corrosion of reinforcement, cracking, cathodic protection and protective coatings, and it highlights the advantages and/or problems of each while explaining the methods and options available.

Download or read book Maintainability of Facilities written by Yit Lin Chew and published by World Scientific Publishing Company. This book was released on 2016-08-19 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on spearheading the integration of maintainability and green facility management right from the design stage. The text introduces the concept of green maintainability, and discusses considerations to maximize the performance by achieving resource and energy efficiency, while minimizing the total life cycle cost in embodied energy; environmental impact and consumption of matter/energy throughout the life cycle of a facility, by "doing it right the first time". In this edition, existing chapters have been brought up to date, to include contemporary sustainability concerns, such as: sustainability design, construction and materials, and maintainability of green features. Maintainability of Facilities is written for practitioners and students in architecture, engineering, building, real estate, construction, project management, facilities management, quantity and building surveying.

Download or read book Concrete Durability written by Thomas Dyer and published by CRC Press. This book was released on 2014-05-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written specifically for the young professional and addressing a growing need for a long service life with minimal maintenance, Concrete Durability takes a whole new look at the whole-life performance of structures. This text examines physical and chemical issues that can threaten the durability of concrete. It explores available options for achiev

Download or read book Fundamentals of Durable Reinforced Concrete written by Mark G. Richardson and published by CRC Press. This book was released on 2023-10-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition sets out the fundamental aspects of concrete durability with an emphasis on sustainability and carbon neutrality through performance-based methodologies. Global approaches to managing durability are explained from both a prescriptive and performance viewpoint. Achieving a balance between the interactive factors influencing durability and sustainability is supported by an explanation of the physical and chemical phenomena at play, determination of key performance parameters by mathematical modelling and physical testing, and current guidance for good practice. New chapters and sections examine the holistic approach to durability and significant aspects of traditional and new cementitious systems. The full range of threats to durability are covered in this single volume, including reinforcement corrosion, carbonation, chloride ingress, freeze-thaw effects, sulfate attack, acid and seawater attack, alkali-aggregate reaction, cracking, abrasion, erosion, cavitation, and weathering. The book presents a framework for specification through internationally adopted codes and standards and summarises the background to probabilistic approaches to durability design, providing a state-of-the-art review of mathematical modelling of deterioration mechanisms along with current directions in test methods for performance-based specifications. Fundamentals of Durable Reinforced Concrete is an essential reference on concrete durability for specifiers and researchers and is also accessible to undergraduate students.

Download or read book Principles and Practices for the Safe Processing of Foods written by H J Heinz and published by Elsevier. This book was released on 2013-10-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Practices for the Safe Processing of Foods presents information on the design, construction, and sanitary maintenance of food processing plants. This book also provides guidelines for establishing and implementing the Hazard Analysis Critical Control Points (HACCP) System and for training personnel in hygienic practices. This text is divided into 13 chapters and begins with the assessment of corporate policies concerning the controlled production of clean, wholesome foods in a sanitary manner. The next chapters deal with some of the requirements for safe food processing, including the establishment and implementation of HACCP rules, building status, sanitation, and personnel. A chapter briefly covers the structure of some microorganisms that affect safe food, such as viruses, bacteria, and fungi. This topic is followed by discussions of the biological factors underlying food safety, preservation, and stability; the principles and application of microbiological control methods; pathogenicity and pathogen profiles; and enzymes and their importance in food spoilage. The last chapters examine the aspects of microbiological safety in food preservation technologies and the criteria for ingredients and finished products. This book will prove useful to food manufacturers, policy makers, and public health workers.

Download or read book Plant Engineer s Reference Book written by DENNIS A SNOW and published by Elsevier. This book was released on 2001-12-17 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: A plant engineer is responsible for a wide range of industrial activities, and may work in any industry. The Plant Engineer's Reference Book 2nd Edition is a reference work designed to provide a primary source of information for the plant engineer. Subjects include the selection of a suitable site for a factory and provision of basic facilities, including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes. Detailed chapters deal with basic issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. The editor, Dennis Snow, has experience of a wide range of operations in the UK, Europe, the USA, and elsewhere in the world. Produced with the backing of the Institution of Plant Engineers, the Plant Engineer's Reference Book, 2nd Edition provides complete coverage of the information needed by plant engineers in any industry worldwide. - Wide range of information will prove to be use to engineers in any industry - Covers all the topics necessary to design and develop an engineering plant - Will help engineers in industry deal with practical problems in a variety of situations

Download or read book Single Pour Industrial Floor Slabs written by John Knapton and published by Thomas Telford. This book was released on 1999 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a comprehensive guide for all those involved with industrial floors, this book deals with the design, construction and behaviour of single pour industrial floors, such as those constructed by laser-guided screeding machines.

Download or read book Concrete Industrial Ground Floors written by Frank R. Neal and published by Thomas Telford. This book was released on 2002-07-15 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quality of floor surfaces in industrial and commercial premises can be vitally important to effective business operations. Increasingly rigorous specifications for industrial floors have resulted in considerable changes in the methods used for their construction.

Download or read book Hygienic Design of Food Factories written by John Holah and published by Woodhead Publishing. This book was released on 2023-05-25 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in food safety knowledge, combined with the continuing rapid development of new food products, have had an impact on the need for improved hygiene in the food manufacturing infrastructure. This has created a need for the second edition of Hygienic Design of Food Factories, which expands all existing chapters and includes new topics, such as cold storage and the control of air in food refrigeration facilities. Additionally, chapters explore the prevention of food contamination when building during production, the risk assessment of which is becoming important globally, and hygienic building design regulations in Russia and Brazil. Divided into 6 parts, the book is now thoroughly updated and expanded. Part one reviews the implications of hygiene and construction regulation in various countries on food factory design, while taking into account retailer requirements as well. Part two describes site selection, factory layout and the associated issue of airflow. Parts three through four and five then address the hygienic design of the essential parts of a food factory. These include walls, ceilings, floors, selected utility and process support systems, entry and exit points, storage areas and changing rooms. Lastly part six covers the management of building work and factory inspection when commissioning the plant. With its distinguished editors and international team of contributors, Hygienic Design of Food Factories, 2nd edition, continues to be an essential reference for managers of food factories, food plant engineers and all those with an academic research interest in the field. - Presents an authoritative overview of hygiene control in the design, construction and renovation of food factories - Examines the implications of hygiene and construction regulation in various countries on food factory design - Describes site selection, factory layout and associated issues of service provision

Download or read book Maintainability Of Facilities For Building Professionals written by Chew Yit Lin Michael and published by World Scientific Publishing Company. This book was released on 2010-01-08 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on spearheading the integration of maintainability, starting right from the design stage. To enable such integration, improving the knowledge of maintainability and setting maintainability benchmarks are two key issues. These objectives are fulfilled with the development of a comprehensive defect library, a material manual and a maintainability scoring system. These tools serve to define acceptable standards in design and construction practices, thus enhancing long-term maintainability of facilities.Maintainability of Facilities: For Building Professionals aims to improve the standard and quality of design, construction and maintenance practices to produce efficient facilities that require minimum maintenance. The text covers technical issues related to maintainability of major components of a facility, and discusses the implications and selection of materials for high maintainability.The target readers are practitioners and students in architecture, engineering, building, real estate, construction, project management, facilities management, quantity and building surveying.