Download or read book Metal Oxides and Related Solids for Electrocatalytic Water Splitting written by Junlei Qi and published by Elsevier. This book was released on 2022-05-05 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides and Related Solids for Electrocatalytic Water Splitting reviews the fundamentals and strategies needed to design and fabricate metal oxide-based electrocatalysts. After an introduction to the key properties of transition metal oxides, materials engineering methods to optimize the performance of metal-oxide based electrocatalysts are discussed. Strategies reviewed include defect engineering, interface engineering and doping engineering. Other sections cover important categories of metal-oxide (and related solids) based catalysts, including layered hydroxides, metal chalcogenides, metal phosphides, metal nitrides, metal borides, and more. Each chapter introduces important properties and material design strategies, including composite and morphology design. There is also an emphasis on cost-effective materials design and fabrication for optimized performance for electrocatalytic water splitting applications. Lastly, the book touches on recently developed in-situ characterization methods applied to observe and control the material synthesis process. - Introduces metal oxide-based materials for electrocatalytic water splitting applications, including their key properties, synthesis, design and fabrication strategies - Reviews the most relevant materials design strategies, including defect engineering, interface engineering, and doping engineering - Discusses the pros and cons of metal oxide-based materials for water splitting applications to aid in materials selection

Download or read book Sulfide and Selenide Based Materials for Emerging Applications written by Goutam Kumar Dalapati and published by Elsevier. This book was released on 2022-06-17 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sulfide and Selenide-Based Materials for Emerging Applications explores a materials and device-based approach to the transition to low-cost sustainable thin film photovoltaic devices and energy storage systems. Part 1 examines recent advances in renewable technologies and materials for sustainable development, as well as photovoltaic energy storage devices. Part 2 discusses thin film solar cells with earth abundant materials, highlighting the power conversion efficiency of the kesterite-based solar cells. Kesterite film technology including different synthesis and doping method designs are also discussed, along with emerging sulfide semiconductors with potential in thin film photovoltaics/flexible devices. In Part 3 sulfur- and selenides-based materials for thermoelectric applications are explored. Part 4 covers chalcogenide semiconductors with applications in electrochemical water splitting for green hydrogen generation and oxygen generation, as well as the latest research on layered 2D transition metal chalcogenides for electrochemical water splitting. To conclude, part 5 discusses recent developments of storage technologies such as Li-S batteries, sulfide-based supercapacitors and metal-ion batteries, and the development of 3D printing sulfides/selenides for energy conversion and storage. This book is a useful resource for those involved in green energy technology and decarbonization and is designed for a broad audience, from students to experienced scientists. - Discusses the emerging sulfide/selenide based thin film absorber materials and their deposition methods - Previews device engineering techniques that have been developed to enhance the power conversion efficiency and lifetime of sulfide/selenide based thin film solar cells - Provides an update on what low cost sulfide/selenide based electro-catalysts have become available and the comparison of their performance vs. noble metal catalysts

Download or read book Green Hydrogen Production by Water Electrolysis written by Junbo Hou and published by CRC Press. This book was released on 2024-07-24 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world’s largest economies have set clear development plans for hydrogen energy. From an Economy, Energy, and Environment (3E) point of view, hydrogen energy can be considered an ideal technology for enabling the energy transition from fossil fuels, restructuring energy systems, securing national energy sources, accelerating carbon neutralization, and driving the development of technologies and industry. Green hydrogen production by water electrolysis is the key for hydrogen energy, and this book offers urgently needed guidance on the most important scientific fundamentals and practical applied technologies in this field. This book: • Details materials, electrochemistry, and mechanics. • Covers ALK, PEM, AEM, and SOEC water electrolysis, including fundamentals and applications. • Addresses trends, opportunities, and challenges. This comprehensive reference is aimed at engineers and scientists working on renewable and alternative energy to meet global energy demands and climate action goals.

Download or read book Chalcogenide Materials for Energy Conversion written by Nicolas Alonso-Vante and published by Springer. This book was released on 2018-04-20 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses electrocatalysis based on chalcogenides, particularly in the nanoscale domain. Special attention is paid to the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR). The book provides an introduction to materials synthesis; the basic principles of electrocatalysis; related precious metal versus non-precious metal catalytic center chalcogenides as well as supports; and the role of such supports in stabilizing the catalytic centers. In short: pursuing a bottom-up approach, it covers the properties of this class of electrocatalysts and examines their applications in low-temperature fuel systems such as microfluidic fuel cells for portable devices. Accordingly, it is ideally suited for all professionals and researchers interested in electrochemistry, renewable energy and electrocatalysis, and non-precious metal centers for chemical energy conversion.

Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.

Download or read book Defects in Two Dimensional Materials written by Rafik Addou and published by Elsevier. This book was released on 2022-02-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects in Two-Dimensional Materials addresses the fundamental physics and chemistry of defects in 2D materials and their effects on physical, electrical and optical properties. The book explores 2D materials such as graphene, hexagonal boron nitride (h-BN) and transition metal dichalcogenides (TMD). This knowledge will enable scientists and engineers to tune 2D materials properties to meet specific application requirements. The book reviews the techniques to characterize 2D material defects and compares the defects present in the various 2D materials (e.g. graphene, h-BN, TMDs, phosphorene, silicene, etc.). As two-dimensional materials research and development is a fast-growing field that could lead to many industrial applications, the primary objective of this book is to review, discuss and present opportunities in controlling defects in these materials to improve device performance in general or use the defects in a controlled way for novel applications. Presents the theory, physics and chemistry of 2D materials Catalogues defects of 2D materials and their impacts on materials properties and performance Reviews methods to characterize, control and engineer defects in 2D materials

Download or read book Photoelectrochemical Water Splitting written by Zhebo Chen and published by Springer Science & Business Media. This book was released on 2013-08-28 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines many of the techniques involved in materials development and characterization for photoelectrochemical (PEC) – for example, proper metrics for describing material performance, how to assemble testing cells and prepare materials for assessment of their properties, and how to perform the experimental measurements needed to achieve reliable results towards better scientific understanding. For each technique, proper procedure, benefits, limitations, and data interpretation are discussed. Consolidating this information in a short, accessible, and easy to read reference guide will allow researchers to more rapidly immerse themselves into PEC research and also better compare their results against those of other researchers to better advance materials development. This book serves as a “how-to” guide for researchers engaged in or interested in engaging in the field of photoelectrochemical (PEC) water splitting. PEC water splitting is a rapidly growing field of research in which the goal is to develop materials which can absorb the energy from sunlight to drive electrochemical hydrogen production from the splitting of water. The substantial complexity in the scientific understanding and experimental protocols needed to sufficiently pursue accurate and reliable materials development means that a large need exists to consolidate and standardize the most common methods utilized by researchers in this field.

Download or read book Two Dimensional Transition Metal Dichalcogenides written by Narayanasamy Sabari Arul and published by Springer. This book was released on 2019-07-30 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced synthesis techniques adopted to fabricate two-dimensional (2D) transition metal dichalcogenides (TMDs) materials with its enhanced properties towards their utilization in various applications such as, energy storage devices, photovoltaics, electrocatalysis, electronic devices, photocatalysts, sensing and biomedical applications. It provides detailed coverage on everything from the synthesis and properties to the applications and future prospects of research in 2D TMD nanomaterials.

Download or read book Amorphous Nanomaterials written by Lin Guo and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable overview covering important fundamental and applicative aspects of amorphous nanomaterials! Amorphous nanomaterials are very important in non-crystalline solids, which have emerged as a new category of advanced materials. Compared to the crystalline counterpart, amorphous nanomaterials with isotropic nature always exhibit fast ion diffusion, relieved strain, and higher reactivity, enabling such materials to exhibit high performance in mechanics and catalysis, as well as other interesting properties. Amorphous Nanomaterials: Preparation, Characterization, and Applications covers the fundamental concept, synthesis, characterization, properties, and applications of nanoscaled amorphous materials. It starts with the introduction of amorphous materials, then gives a global view of the history, structure, and growth mechanism of amorphous nanomaterials. Subsequently, some powerful techniques to characterize amorphous materials, such as X-ray absorption fine structure spectroscopy, spherical aberration electron microscope, in-situ-Transmission Electron Microscope, Electron Energy Loss Spectroscopy, and some other defect characterization technologies are included. Furthermore, the emerging innovative methods to fabricate well-defined, regularshaped amorphous nanomaterials, including zero-, one-, two-, and three-dimensional amorphous nanomaterials are systematically introduced. The fascinating properties and applications related to amorphous nanomaterials including the applications in electrocatalysis, batteries, supercapacitors, photocatalysis, mechanics, etc., are presented. It will greatly help the researchers to find professional answers related to amorphous materials. Great topic: amorphous nanomaterials are a very large and important field in both academia and industry Comprehensive: in-depth discussion of various important aspects, from both a fundamental and an applied point of view, on the chemistry, physics and technological importance of the amorphous nanomaterials are presented Vitally needed: the understanding of the fundamentals of amorphous nanomaterials is a prerequisite for devising new applications of such materials Highly relevant: amorphous nanomaterials have found specific applications in chemistry, catalysis, physics, sensing, batteries, supercapacitors, and engineering Amorphous Nanomaterials is a vital resource for materials scientists, inorganic and physical chemists, solid state chemists, physicists, catalytic and analytical chemists, as well as organic chemists.

Download or read book Electrochemistry of Metal Chalcogenides written by Mirtat Bouroushian and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides a unified account of the electrochemical material science of metal chalcogenide (MCh) compounds and alloys with regard to their synthesis, processing and applications. Starting with the chemical fundamentals of the chalcogens and their major compounds, the initial part of the book includes a systematic description of the MCh solids on the basis of the Periodic Table in terms of their structures and key properties. This is followed by a general discussion on the electrochemistry of chalcogen species, and the principles underlying the electrochemical formation of inorganic compounds/alloys. The core of the book offers an insight into available experimental results and inferences regarding the electrochemical preparation and microstructural control of conventional and novel MCh structures. It also aims to survey their photoelectrochemistry, both from a material-oriented point of view and as connected to specific processes such as photocatalysis and solar energy conversion. Finally, the book illustrates the relevance of MCh materials to various applications of electrochemical interest such as (electro)catalysis in fuel cells, energy storage with intercalation electrodes, and ion sensing.

Download or read book Advanced Energy Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-02-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for scientists designing new energy materials for the vast landscape of solar energy conversion as well as materials processing and characterization Based on the new and fundamental research on novel energy materials with tailor-made photonic properties, the role of materials engineering has been to provide much needed support in the development of photovoltaic devices. Advanced Energy Materials offers a unique, state-of-the-art look at the new world of novel energy materials science, shedding light on the subject’s vast multi-disciplinary approach The book focuses particularly on photovoltaics, efficient light sources, fuel cells, energy-saving technologies, energy storage technologies, nanostructured materials as well as innovating materials and techniques for future nanoscale electronics. Pathways to future development are also discussed. Critical, cutting-edge subjects are addressed, including: Non-imaging focusing heliostat; state-of-the-art of nanostructures Metal oxide semiconductors and their nanocomposites Superionic solids; polymer nanocomposites; solid electrolytes; advanced electronics Electronic and optical properties of lead sulfide High-electron mobility transistors and light-emitting diodes Anti-ferroelectric liquid crystals; PEEK membrane for fuel cells Advanced phosphors for energy-efficient lighting Molecular computation photovoltaics and photocatalysts Photovoltaic device technology and non-conventional energy applications Readership The book is written for a large and broad readership including researchers and university graduate students from diverse backgrounds such as chemistry, materials science, physics, and engineering working in the fields of nanotechnology, photovoltaic device technology, and non-conventional energy.

Download or read book Two Dimensional Transition Metal Dichalcogenides written by Alexander V. Kolobov and published by Springer. This book was released on 2016-07-26 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the current status of theoretical and experimental progress in 2 dimensional graphene-like monolayers and few-layers of transition metal dichalcogenides (TMDCs). Semiconducting monolayer TMDCs, due to the presence of a direct gap, significantly extend the potential of low-dimensional nanomaterials for applications in nanoelectronics and nano-optoelectronics as well as flexible nano-electronics with unprecedented possibilities to control the gap by external stimuli. Strong quantum confinement results in extremely high exciton binding energies which forms an interesting platform for both fundamental studies and device applications. Breaking of spatial inversion symmetry in monolayers results in strong spin-valley coupling potentially leading to their use in valleytronics. Starting with the basic chemistry of transition metals, the reader is introduced to the rich field of transition metal dichalcogenides. After a chapter on three dimensional crystals and a description of top-down and bottom-up fabrication methods of few-layer and single layer structures, the fascinating world of two-dimensional TMDCs structures is presented with their unique atomic, electronic, and magnetic properties. The book covers in detail particular features associated with decreased dimensionality such as stability and phase-transitions in monolayers, the appearance of a direct gap, large binding energy of 2D excitons and trions and their dynamics, Raman scattering associated with decreased dimensionality, extraordinarily strong light-matter interaction, layer-dependent photoluminescence properties, new physics associated with the destruction of the spatial inversion symmetry of the bulk phase, spin-orbit and spin-valley couplings. The book concludes with chapters on engineered heterostructures and device applications such as a monolayer MoS2 transistor. Considering the explosive interest in physics and applications of two-dimensional materials, this book is a valuable source of information for material scientists and engineers working in the field as well as for the graduate students majoring in materials science.

Download or read book Zinc Catalysis written by Stephan Enthaler and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap in the market for comprehensive coverage of this hot topic, this timely book covers a wide range of organic transformations, e. g. reductions of unsaturated compounds, oxidation reactions, Friedel-Crafts reactions, hydroamination reactions, depolymerizations, transformations of carbon dioxide, oxidative coupling reactions, as well as C-C, C-N, and C-O bond formation reactions. A chapter on the application of zinc catalysts in total synthesis is also included. With its aim of stimulating further research and discussion in the field, this is a valuable reference for professionals in academia and industry wishing to learn about the latest developments.

Download or read book Semiconductor Gas Sensors written by Raivo Jaaniso and published by Woodhead Publishing. This book was released on 2019-09-24 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Gas Sensors, Second Edition, summarizes recent research on basic principles, new materials and emerging technologies in this essential field. Chapters cover the foundation of the underlying principles and sensing mechanisms of gas sensors, include expanded content on gas sensing characteristics, such as response, sensitivity and cross-sensitivity, present an overview of the nanomaterials utilized for gas sensing, and review the latest applications for semiconductor gas sensors, including environmental monitoring, indoor monitoring, medical applications, CMOS integration and chemical warfare agents. This second edition has been completely updated, thus ensuring it reflects current literature and the latest materials systems and applications. - Includes an overview of key applications, with new chapters on indoor monitoring and medical applications - Reviews developments in gas sensors and sensing methods, including an expanded section on gas sensor theory - Discusses the use of nanomaterials in gas sensing, with new chapters on single-layer graphene sensors, graphene oxide sensors, printed sensors, and much more

Download or read book Organometallic Chemistry and Catalysis written by Didier Astruc and published by Springer Science & Business Media. This book was released on 2007-08-02 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers both basic and advanced aspects of organometallic chemistry of all metals and catalysis. In order to present a comprehensive view of the subject, it provides broad coverage of organometallic chemistry itself. The catalysis section includes the challenging activation and fictionalization of the main classes of hydrocarbons and the industrially crucial heterogeneous catalysis. Summaries and exercises are provides at the end of each chapter, and the answers to these exercises can be found at the back of the book. Beginners in inorganic, organic and organometallic chemistry, as well as advanced scholars and chemists from academia and industry will find much value in this title.

Download or read book Fast Ion Transport in Solids written by B. Scrosati and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main motivation for the organization of the Advanced Research Workshop in Belgirate was the promotion of discussions on the most recent issues and the future perspectives in the field of Solid State lonics. The location was chosen on purpose since Belgirate was the place were twenty years ago, also then under the sponsorship of NATO, the very first international meeting on this important and interdisciplinary field took place. That meeting was named "Fast Ion Transport in Solids" and gathered virtually everybody at that time having been active in any aspect of motion of ions in solids. The original Belgirate Meeting made for the first time visible the technological potential related to the phenomenon of the fast ionic transport in solids and, accordingly, the field was given the name "Solid State lonics". This field is now expanded to cover a wide range of technologies which includes chemical sensors for environmental and process control, electrochromic windows, mirrors and displays, fuel cells, high performance rechargeable batteries for stationary applications and electrotraction, chemotronics, semiconductor ionics, water electrolysis cells for hydrogen economy and other applications. The main idea for holding an anniversary meeting was that of discussing the most recent issues and the future perspectives of Solid State lonics just twenty years after it has started at the same location on the lake Maggiore in North Italy.

Download or read book Comprehensive Coordination Chemistry II written by J. A. McCleverty and published by Newnes. This book was released on 2003-12-03 with total page 11845 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Coordination Chemistry II (CCC II) is the sequel to what has become a classic in the field, Comprehensive Coordination Chemistry, published in 1987. CCC II builds on the first and surveys new developments authoritatively in over 200 newly comissioned chapters, with an emphasis on current trends in biology, materials science and other areas of contemporary scientific interest.