Download or read book In Flight Learning Based Flight Control of an Unmanned Aircraft System written by Mohammed Alabsi and published by . This book was released on 2018 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned Aerial Vehicles (UAVs) popularity has increased substantially in the last few years. UAVs capabilities continue to improve as a result of advances in battery technology, communication, navigation systems and electronics. Increased popularity has driven researchers to improve UAVs reliability and safety which is reflected by the number of publications and accelerating educational programs interest. UAVs are suited for a wide range of civilian and military applications; however, UAVs currently can not integrate with civilian airspace because of stringent safety requirements. Hence, it is necessary to push the envelope for UAVs design and control so that they can learn from nature and have more self-aware capabilities to improve safety and reliability. This dissertation addresses some challenges involved with flight controller learning based on real-time modeling of UAV. Plenty of UAV applications require different operational capabilities within a composite mission. These capabilities include landing and taking off using short runways, while being able to perform missions that require a high cruise speed i.e. tracking applications. A composite mission also requires the aircraft to be able to hover or operate with low cruise speeds for applications involving stationary moments. All of these different operational modes require a hybrid aircraft design that combines fixed wing aircraft capabilities and Vertical Take-Off and Landing (VTOL) aircraft capabilities. However, extensive resources required for hybrid aircraft design prohibited the discovery of different revolutionary designs. The work presented in this dissertation describes the development of a rapid modeling, prototyping and controller design platform of an unmanned quadrotor aircraft. Three main objectives are investigated: intelligent excitation input design, real-time parameter estimation, and learning control. Real-time estimation of dynamic model parameters is important for control adaptation. However, the aircraft model estimation performance can be severely degraded by an active control system and highly collinear model terms such as those found on a quadrotor unmanned aircraft. Recursive Fourier Transform Regression was applied to estimate parameters of different model forms/structures and using different excitation levels. The generated models are utilized to reconfigure a Nonlinear Dynamic Inversion (NDI) controller considering different testing conditions: normal, failure, and learning flights. Finally,an intelligent input design technique is proposed which enables autonomous identification of the vehicle’s response modal frequencies and emphasizes excitation power accordingly.
Download or read book Unmanned Aircraft Systems written by Kimon P. Valavanis and published by Springer Science & Business Media. This book was released on 2008-12-21 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned Aircraft Systems (UAS) have seen unprecedented levels of growth during the last decade in both military and civilian domains. It is anticipated that civilian applications will be dominant in the future, although there are still barriers to be overcome and technical challenges to be met. Integrating UAS into, for example, civilian space, navigation, autonomy, see-detect-and-avoid systems, smart designs, system integration, vision-based navigation and training, to name but a few areas, will be of prime importance in the near future. This special volume is the outcome of research presented at the International Symposium on Unmanned Aerial Vehicles, held in Orlando, Florida, USA, from June 23-25, 2008, and presents state-of-the-art findings on topics such as: UAS operations and integration into the national airspace system; UAS navigation and control; micro-, mini-, small UAVs; UAS simulation testbeds and frameworks; UAS research platforms and applications; UAS applications. This book aims at serving as a guide tool on UAS for engineers and practitioners, academics, government agencies and industry. Previously published in the Journal of Intelligent and Robotic Systems, 54 (1-3, 2009).
Download or read book Advances in Flight Control Systems written by Maria Agneta Balint and published by BoD – Books on Demand. This book was released on 2011-04-11 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear problems in flight control have stimulated cooperation among engineers and scientists from a range of disciplines. Developments in computer technology allowed for numerical solutions of nonlinear control problems, while industrial recognition and applications of nonlinear mathematical models in solving technological problems is increasing. The aim of the book Advances in Flight Control Systems is to bring together reputable researchers from different countries in order to provide a comprehensive coverage of advanced and modern topics in flight control not yet reflected by other books. This product comprises 14 contributions submitted by 38 authors from 11 different countries and areas. It covers most of the currents main streams of flight control researches, ranging from adaptive flight control mechanism, fault tolerant flight control, acceleration based flight control, helicopter flight control, comparison of flight control systems and fundamentals. According to these themes the contributions are grouped in six categories, corresponding to six parts of the book.
Download or read book Introduction to Unmanned Aircraft Systems written by R. Kurt Barnhart and published by CRC Press. This book was released on 2016-10-26 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Unmanned Aircraft Systems surveys the fundamentals of unmanned aircraft system (UAS) operations, from sensors, controls, and automation to regulations, safety procedures, and human factors. It is designed for the student or layperson and thus assumes no prior knowledge of UASs, engineering, or aeronautics. Dynamic and well-illustrated, the first edition of this popular primer was created in response to a need for a suitable university-level textbook on the subject. Fully updated and significantly expanded, this new Second Edition: Reflects the proliferation of technological capability, miniaturization, and demand for aerial intelligence in a post-9/11 world Presents the latest major commercial uses of UASs and unmanned aerial vehicles (UAVs) Enhances its coverage with greater depth and support for more advanced coursework Provides material appropriate for introductory UAS coursework in both aviation and aerospace engineering programs Introduction to Unmanned Aircraft Systems, Second Edition capitalizes on the expertise of contributing authors to instill a practical, up-to-date understanding of what it takes to safely operate UASs in the National Airspace System (NAS). Complete with end-of-chapter discussion questions, this book makes an ideal textbook for a first course in UAS operations.
Download or read book Fault tolerant Flight Control and Guidance Systems written by Guillaume J. J. Ducard and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.
Download or read book Smart Autonomous Aircraft written by Yasmina Bestaoui Sebbane and published by CRC Press. This book was released on 2015-11-18 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the extraordinary growth of Unmanned Aerial Vehicles (UAV) in research, military, and commercial contexts, there has been a need for a reference that provides a comprehensive look at the latest research in the area. Filling this void, Smart Autonomous Aircraft: Flight Control and Planning for UAV introduces the advanced methods of flight contr
Download or read book Flight Formation Control written by Josep M. Guerrero and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade the development and control of Unmanned Aerial Vehicles (UAVs) has attracted a lot of interest. Both researchers and companies have a growing interest in improving this type of vehicle given their many civilian and military applications. This book presents the state of the art in the area of UAV Flight Formation. The coordination and robust consensus approaches are presented in detail as well as formation flight control strategies which are validated in experimental platforms. It aims at helping students and academics alike to better understand what coordination and flight formation control can make possible. Several novel methods are presented: - controllability and observability of multi-agent systems; - robust consensus; - flight formation control; - stability of formations over noisy networks; which generate solutions of guaranteed performance for UAV Flight Formation. Contents 1. Introduction, J.A. Guerrero. 2. Theoretical Preliminaries, J.A. Guerrero. 3. Multiagent Coordination Strategies, J.A. Guerrero, R. Lozano, M.W. Spong, N. Chopra. 4. Robust Control Design for Multiagent Systems with Parametric Uncertainty, J.A. Guerrero, G. Romero. 5. On Adaptive and Robust Controlled Synchronization of Networked Robotic Systems on Strongly Connected Graphs, Y.-C. Liu, N. Chopra. 6. Modeling and Control of Mini UAV, G. Flores Colunga, J.A. Guerrero, J. Escareño, R. Lozano. 7. Flight Formation Control Strategies for Mini UAVs, J.A. Guerrero. 8. Formation Based on Potential Functions, L. García, A. Dzul. 9. Quadrotor Vision-Based Control, J.E. Gomez-Balderas, J.A. Guerrero, S. SALAZAR, R. Lozano, P. Castillo. 10. Toward Vision-Based Coordination of Quadrotor Platoons, L.R. García Carrillo, J.A. Guerrero, R. Lozano. 11. Optimal Guidance for Rotorcraft Platoon Formation Flying in Wind Fields, J.A. Guerrero, Y. Bestaoui, R. Lozano. 12. Impact of Wireless Medium Access Protocol on the Quadrotor Formation Control, J.A. Guerrero, Y. Challal, P. Castillo. 13. MAC Protocol for Wireless Communications, A. Mendez, M. Panduro, O. Elizarraras, D. Covarrubias. 14. Optimization of a Scannable Pattern for Bidimensional Antenna Arrays to Provide Maximum Performance, A. Reyna, M.A. Panduro, A. Mendez.
Download or read book Automatic Flight Control Systems written by Thomas Lombaerts and published by BoD – Books on Demand. This book was released on 2012-01-18 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of flight control is inseparably linked to the history of aviation itself. Since the early days, the concept of automatic flight control systems has evolved from mechanical control systems to highly advanced automatic fly-by-wire flight control systems which can be found nowadays in military jets and civil airliners. Even today, many research efforts are made for the further development of these flight control systems in various aspects. Recent new developments in this field focus on a wealth of different aspects. This book focuses on a selection of key research areas, such as inertial navigation, control of unmanned aircraft and helicopters, trajectory control of an unmanned space re-entry vehicle, aeroservoelastic control, adaptive flight control, and fault tolerant flight control. This book consists of two major sections. The first section focuses on a literature review and some recent theoretical developments in flight control systems. The second section discusses some concepts of adaptive and fault-tolerant flight control systems. Each technique discussed in this book is illustrated by a relevant example.
Download or read book Introduction to UAV Systems written by Paul G. Fahlstrom and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned aerial vehicles (UAVs) have been widely adopted in the military world over the last decade and the success of these military applications is increasingly driving efforts to establish unmanned aircraft in non-military roles. Introduction to UAV Systems, 4th edition provides a comprehensive introduction to all of the elements of a complete Unmanned Aircraft System (UAS). It addresses the air vehicle, mission planning and control, several types of mission payloads, data links and how they interact with mission performance, and launch and recovery concepts. This book provides enough information to encourage a student to learn more; to provide a specialist with a basic appreciation of the technical issues that drive other parts of the system and interact with their specialty; or to help a program manager understand system-level tradeoffs and know what questions to ask. Key features: Comprehensive overview of all elements of a UAS and of how they interact. Introduces the underlying concepts of key subsystems. Emphasizes system-integration issues and how they relate to subsystem design choices. Practical discussion of issues informed by lessons learned in UAV programs. Introduction to UAV Systems, 4th edition is written both for newcomers to the subject and for experienced members of the UAV community who desire a comprehensive overview at the system level. As well as being a primary text for an introductory course on UAS or a supplementary text in a course that goes into more depth in one of the individual technologies involved in a UAS, this book is a useful overview for practicing engineers, researchers, managers, and consultants interested in UAV systems.
Download or read book Unmanned Aircraft Systems written by Ella Atkins and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: UNMANNED AIRCRAF T SYSTEMS UNMANNED AIRCRAF T SYSTEMS An unmanned aircraft system (UAS), sometimes called a drone, is an aircraft without a human pilot on board ??? instead, the UAS can be controlled by an operator station on the ground or may be autonomous in operation. UAS are capable of addressing a broad range of applications in diverse, complex environments. Traditionally employed in mainly military applications, recent regulatory changes around the world are leading to an explosion of interest and wide-ranging new applications for UAS in civil airspace. Covering the design, development, operation, and mission profiles of unmanned aircraft systems, this single, comprehensive volume forms a complete, stand-alone reference on the topic. The volume integrates with the online Wiley Encyclopedia of Aerospace Engineering, providing many new and updated articles for existing subscribers to that work. The chapters cover the following items: Airframe configurations and design (launch systems, power generation, propulsion) Operations (missions, integration issues, and airspace access) Coordination (multivehicle cooperation and human oversight) With contributions from leading experts, this volume is intended to be a valuable addition, and a useful resource, for aerospace manufacturers and suppliers, governmental and industrial aerospace research establishments, airline and aviation industries, university engineering and science departments, and industry analysts, consultants, and researchers.
Download or read book Robust Discrete Time Flight Control of UAV with External Disturbances written by Shuyi Shao and published by Springer Nature. This book was released on 2020-09-26 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies selected discrete-time flight control schemes for fixed-wing unmanned aerial vehicle (UAV) systems in the presence of system uncertainties, external disturbances and input saturation. The main contributions of this book for UAV systems are as follows: (i) the proposed integer-order discrete-time control schemes are based on the designed discrete-time disturbance observers (DTDOs) and the neural network (NN); and (ii) the fractional-order discrete-time control schemes are developed by using the fractional-order calculus theory, the NN and the DTDOs. The book offers readers a good understanding of how to establish discrete-time tracking control schemes for fixed-wing UAV systems subject to system uncertainties, external wind disturbances and input saturation. It represents a valuable reference guide for academic research on uncertain UAV systems, and can also support advanced / Ph.D. studies on control theory and engineering.
Download or read book Applications of Small Unmanned Aircraft Systems written by J.B. Sharma and published by CRC Press. This book was released on 2019-10-18 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in high spatial resolution mapping capabilities and the new rules established by the Federal Aviation Administration in the United States for the operation of Small Unmanned Aircraft Systems (sUAS) have provided new opportunities to acquire aerial data at a lower cost and more safely versus other methods. A similar opening of the skies for sUAS applications is being allowed in countries across the world. Also, sUAS can access hazardous or inaccessible areas during disaster events and provide rapid response when needed. Applications of Small Unmanned Aircraft systems: Best Practices and Case Studies is the first book that brings together the best practices of sUAS applied to a broad range of issues in high spatial resolution mapping projects. Very few sUAS pilots have the knowledge of how the collected imagery is processed into value added mapping products that have commercial and/or academic import. Since the field of sUAS applications is just a few years old, this book covers the need for a compendium of case studies to guide the planning, data collection, and most importantly data processing and map error issues, with the range of sensors available to the user community. Written by experienced academics and professionals, this book serves as a guide on how to formulate sUAS based projects, from choice of a sUAS, flight planning for a particular application, sensors and data acquisition, data processing software, mapping software and use of the high spatial resolution maps produced for particular types of geospatial modeling. Features: Focus on sUAS based data acquisition and processing into map products Broad range of case studies by highly experienced academics Practical guidance on sUAS hardware, sensors, and software utilized Compilation of workflow insights from expert professors and professionals Relevant to academia, government, and industry Positional and thematic map accuracy, UAS curriculum development and workflow replicability issues This book would be an excellent text for upper-level undergraduate to graduate level sUAS mapping application courses. It is also invaluable as a reference for educators designing sUAS based curriculum as well as for potential sUAS users to assess the scope of mapping projects that can be done with this technology.
Download or read book Design of Unmanned Aerial Systems written by Mohammad H. Sadraey and published by John Wiley & Sons. This book was released on 2020-02-20 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the design and analysis of unmanned aircraft systems with a systems perspective Written for students and engineers who are new to the field of unmanned aerial vehicle design, this book teaches the many UAV design techniques being used today and demonstrates how to apply aeronautical science concepts to their design. Design of Unmanned Aerial Systems covers the design of UAVs in three sections—vehicle design, autopilot design, and ground systems design—in a way that allows readers to fully comprehend the science behind the subject so that they can then demonstrate creativity in the application of these concepts on their own. It teaches students and engineers all about: UAV classifications, design groups, design requirements, mission planning, conceptual design, detail design, and design procedures. It provides them with in-depth knowledge of ground stations, power systems, propulsion systems, automatic flight control systems, guidance systems, navigation systems, and launch and recovery systems. Students will also learn about payloads, manufacturing considerations, design challenges, flight software, microcontroller, and design examples. In addition, the book places major emphasis on the automatic flight control systems and autopilots. Provides design steps and procedures for each major component Presents several fully solved, step-by-step examples at component level Includes numerous UAV figures/images to emphasize the application of the concepts Describes real stories that stress the significance of safety in UAV design Offers various UAV configurations, geometries, and weight data to demonstrate the real-world applications and examples Covers a variety of design techniques/processes such that the designer has freedom and flexibility to satisfy the design requirements in several ways Features many end-of-chapter problems for readers to practice Design of Unmanned Aerial Systems is an excellent text for courses in the design of unmanned aerial vehicles at both the upper division undergraduate and beginning graduate levels.
Download or read book A Feasibility Study of Self learning Adaptive Flight Control for High Performance Aircraft written by Stephen G. Hoppe and published by . This book was released on 1967 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the feasibility of a self-learning adaptive system for the flight control of high performance aircraft has been performed. A flight control system was developed for the investigation of the stability augmentation of the longitudinal axis of the F101B aircraft using self-learning adaptive control. The learning adaptive controller developed employs a three-loop concept. The innermost loop comprises a linear feedback control system in which a set of control gains is adjusted by a second (adaptive) loop employing a parameter identifier and a trainable function generator (automation). The automation provides the correct values of feedback gain in response to patterns derived from the identified aircraft parameters. The third loop (the learning loop) measures control system performance, and continually retrains the automation to improve the performance. Experiments were performed with a digital simulation of the aircraft and the learning adaptive control system. Results of the experiments indicate that learning adaptive control is feasible. However, a number of significant technical problems must be overcome prior to the use of such a control system in tactical aircraft. Studies of sensitivity must be performed to assess the effect of small perturbations in the identification parameters on system performance. Extended studies of property extraction from the identified parameters is required, and means for further simplifying the control structure is of importance in a real system. (Author).
Download or read book Small Unmanned Aircraft written by Randal W. Beard and published by Princeton University Press. This book was released on 2012-02-26 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliographical references (p. [291]-298) and index.
Download or read book Automatic Flight Control Systems written by Mohammad Sadraey and published by Morgan & Claypool Publishers. This book was released on 2020-02-14 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a design approach to the automatic flight control systems (AFCS). The AFCS is the primary on-board tool for long flight operations, and is the foundation for the airspace modernization initiatives. In this text, AFCS and autopilot are employed interchangeably. It presents fundamentals of AFCS/autopilot, including primary subsystems, dynamic modeling, AFCS categories/functions/modes, servos/actuators, measurement devices, requirements, functional block diagrams, design techniques, and control laws. The book consists of six chapters. The first two chapters cover the fundamentals of AFCS and closed-loop control systems in manned and unmanned aircraft. The last four chapters present features of Attitude control systems (Hold functions), Flight path control systems (Navigation functions), Stability augmentation systems, and Command augmentation systems, respectively.
Download or read book Multi rotor Platform Based UAV Systems written by Franck Cazaurang and published by ISTE Press - Elsevier. This book was released on 2020-03-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-rotor Platform Based UAV Systems provides an excellent opportunity for experiential learning, capability augmentation and confidence-building for senior level undergraduates, entry-level graduates, engineers working in government agencies, and industry involved in UAV R&D. Topics in this book include an introduction to VTOL multi-copter UAV platforms, UAV system architecture, integration in the national airspace, including UAV classification and associated missions, regulation and safety, certification and air traffic management, integrated mission planning, including autonomous fault tolerant path planning and vision based auto landing systems, flight mechanics and stability, dynamic modeling and flight controller development. Other topics covered include sense, detect and avoid systems, flight testing, including safety assessment instrumentation and data acquisition telemetry, synchronization data fusion, the geo-location of identified targets, and much more. Provides an excellent opportunity for experiential learning, capability augmentation and confidence building for senior level undergraduates, entry-level graduates and engineers working in government, and industry involved in UAV R&D Includes MATLAB/SIMULINK computational tools and off-the-shelf hardware implementation tutorials Offers a student centered approach Provides a quick and efficient means to conceptualize, design, synthesize and analyze using modeling and simulations Offers international perspective and appeal for engineering students and professionals
