Download or read book Improving Concrete and Mortar using Modified Ash and Slag Cements written by Leonid Dvorkin and published by CRC Press. This book was released on 2020-04-18 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of concrete and mortar containing coal fly ash, blast furnace slag, and other dispersed technogenic materials is one of the major areas of potential resource savings and improving the environmental efficiency and sustainability of construction. Improving Concrete and Mortar using Modified Ash and Slag Cements presents the results of a study of high-tech concrete on composite Portland cement and slag Portland cement. It explains the possibility of significantly improving the properties of cements and concrete with the introduction of superplasticizers and hardening activators. Features: Describes how additives can reduce costs and lead to more environmentally sustainable production Explains the possibility of obtaining high-tech concrete with a high content of ash, slag, and clinker kiln dust Presents the possibility of significant reductions of the most energy-intensive component of cements Examines the calculated dependences for predicting the technical properties of concrete saturated with dispersed technogenic products Explains the methods of calculating the composition of concrete with specified properties of low-clinker cements Suitable for civil and structural engineers as well as for specialists working in the field of concrete technology, students of civil engineering, and researchers of new construction technologies, this book allows readers to understand new and sustainable ways to improve the properties of concrete and mortar by utilizing additives.
Download or read book High Performance Concrete Optimal Composition Design written by Leonid Dvorkin and published by CRC Press. This book was released on 2023-09-01 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete and reinforced concrete remain the main building materials for construction of modern fortifications. The book presents experimental and theoretical results allowing production of special high-strength rapid hardening concrete and fiber reinforced concrete. It describes a method for effective proportioning of high-strength fast-setting concrete and fiber reinforced concrete with high dynamic strength as well as selecting proper technological parameters, methodology for design of reinforced concrete structures using such concrete. Particular attention is paid to ensuring the early strengthening of concrete within 24 hours after casting and to constructing structures with limited energy resources at the site.
Download or read book Fly Ash in Concrete written by K. Wesche and published by CRC Press. This book was released on 2004-03-01 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a state-of-the-art report which documents current knowledge on the properties of fly ash in concrete and the use of fly ash in construction. It includes RILEM Recommendations on fly ash in concrete and a comprehensive bibliography including over 800 references.
Download or read book Poly Ethylene Terephthalate Based Blends Composites and Nanocomposites written by P.M. Visakh and published by William Andrew. This book was released on 2015-08-24 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly(Ethylene Terephthalate) (PET) is an industrially important material which is not treated specifically in any other book. Poly(Ethylene Terephthalate) Based Blends, Composites and Nanocomposites fills this gap and systematically guides the reader through all aspects of PET and its blends, composites and nanocomposites. It covers theoretical fundamentals, nanocomposites preparation, modification techniques, structure-property relationships, characterisation of the different blends and composites, and material choice for specific applications. Consisting of contributions from experts in the field this book is a useful reference for the researchers and engineers working on the development and characterization of PET materials as well as on implementing them in real-world products. It can also be used as a standard reference for deeper insight in the mechanical, thermal, thermo-mechanical and visco-elastic aspects in product design decisions. Provides a systematic overview on all types of poly(ethylene) terephthalate (PET) based blends, composites and nanocomposites Informs about characterization, structure-property relationships and types of modifications Links material properties to specific applications, enabling engineers to make the best material choice to increase product performance and cost efficiency, in industries ranging from aerospace to energy
Download or read book Pozzolanic and Cementitious Materials written by V.M. Malhotra and published by CRC Press. This book was released on 2014-04-21 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series will present twenty short, sharply-focused tracts, each one covering one of the many aspects of concrete technology: materials, design, construction, testing, and other significant aspects. Volume 1 provides a complete overview of the mineral admixtures used in concrete, including silica fume, slag, rice-husk ash, fly ash, and natural pozzolans. This book will include the mineral and chemical composition of the admixtures, their chemical reactions with cement and as a method of recycling.
Download or read book Modeling and Computation in Engineering II written by Liquan Xie and published by CRC Press. This book was released on 2013-05-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Computation in Engineering II (CMCE 2013, Hong Kong, 22-23 June 2013) includes 50 contributions on modeling and simulation technology, which were presented at the 2nd SREE Conference on Modeling and Computation in Engineering (CMCE 2013) and the 3rd SREE Workshop on Applied Mechanics and Civil Engineering (AMCE 2013), both held in Hong
Download or read book Cement Industry written by Hosam Saleh and published by BoD – Books on Demand. This book was released on 2021-06-09 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement is the basis of the building and construction industry and of fundamental importance for many civil engineering applications. As such, the cement industry is one of the key industries worldwide necessary for the current and future sustainable development of society. Despite its undisputed importance, the cement industry is one of those industrial branches predominately responsible for high energy consumption and excessive generation of large amounts of carbon dioxide and other contaminants that significantly endanger human health and the environment and contributes to global warming.In this context, nanomaterials, polymeric materials, and natural additives are being used for cement enhancement in various applications. This book examines these novel materials and their optimization, characterization, and sustainable application in the building industry and for stabilizing hazardous waste.
Download or read book Concrete Solutions 2014 written by Michael Grantham and published by CRC Press. This book was released on 2014-08-18 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concrete Solutions series of International Conferences on Concrete Repair began in 2003 with a conference held in St. Malo, France in association with INSA Rennes. Subsequent conferences have seen us partnering with the University of Padua in 2009 and with TU Dresden in 2011. This conference is being held for the first time in the UK, in associ
Download or read book Handbook of Thermal Analysis of Construction Materials written by V.S. Ramachandran and published by William Andrew. This book was released on 2002-10-28 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book containing essential information on the applicability of thermal analysis techniques to evaluate inorganic and organic materials in construction technology should serve as a useful reference for the scientist, engineer, construction technologist, architect, manufacturer, and user of construction materials, standard-writing bodies, and analytical chemists. The material scientists at the National Research Council of Canada have established one of the best thermal analysis laboratories in the world. Various types of thermal analysis techniques have been applied successfully to the investigation of inorganic and organic construction materials. These studies have provided important information on the characterization of raw as well as finished materials, quality control, quantitative estimation, interrelationships between physical, chemical, mechanical, and durability characteristics. Information on the application of thermal analysis to construction materials is dispersed in literature and hence the IRC scientists embarked on producing a handbook, the first of its kind, incorporating the latest knowledge available in this field of activity. Almost all important construction materials have been included.
Download or read book Admixtures for Concrete Improvement of Properties written by E. Vazques and published by CRC Press. This book was released on 2004-11-23 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical admixtures are used to modify the properties and behaviour of fresh and hardened concrete. They enable more economic construction and the achievement of special properties such as high strength or durability. This book presents new research information from an International RILEM Symposium on six main topics: workability, setting, strength, durability, other properties and technology.
Download or read book Fly Ash Increases Resistance of Concrete to Sulfate Attack written by James T. Dikeou and published by . This book was released on 1975 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ACI Manual of Concrete Inspection written by and published by American Concrete Institute. This book was released on 2008 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is intended to guide, assist, and instruct concrete inspectors and others engaged in concrete construction and testing, including field engineers, construction superintendents, supervisors, laboratory and field technicians, and workers. Designers may also find the manual to be a valuable reference by using the information to better adapt their designs to the realities of field construction. Because of the diverse possible uses of the manual and the varied backgrounds of the readers, it includes the reasoning behind the technical instructions. The field of concrete construction has expanded dramatically over the years to reflect the many advances that have taken place in the concrete industry. Although many of the fundamentals presented in previous editions of this manual remain relevant and technically correct, this eleventh edition incorporates new material to address these advances in technology
Download or read book Fly Ash Silica Fume Slag Other Mineral By products in Concrete written by V. M. Malhotra and published by . This book was released on 1983 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Alkali Activated Cements Mortars and Concretes written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2014-11-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet’s total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint. Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders Considers performance in adverse environmental conditions. Offers equal emphasis on the science behind the technology and its use in civil engineering.
Download or read book Ground Improvement Techniques written by T. G. Sitharam and published by Springer Nature. This book was released on 2021-03-24 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents select papers presented at the 7th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics. The papers discuss advances in the fields of soil dynamics and geotechnical earthquake engineering. Some of the themes include slope stability, shallow and deep foundations, geosynthetics, ground improvement techniques, etc. A strong emphasis is placed on connecting academic research and field practice, with many examples, case studies, best practices, and discussions on performance based design. This volume will be of interest to researchers and practicing engineers alike.
Download or read book Ceramic Abstracts written by and published by . This book was released on 1994 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Significance of Tests and Properties of Concrete and Concrete making Materials written by Paul Klieger and published by ASTM International. This book was released on 1994 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt:
