Download or read book Improvement of Buildings Structural Quality by New Technologies written by Christian Schauer and published by CRC Press. This book was released on 2005-01-20 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Launched in May 2000, the aims of the COST C12 cooperative action were: to develop, combine and disseminate new technical engineering technologies to improve the quality of urban buildings to propose new technical solutions to architects and planners to reduce the disturbance caused by construction in urban areas and improve urban quality of life. This volume contains the proceedings of the COST C12 final conference held in Innsbruck, Austria from January 20-22 2005. The book reflects not only the outcome of the four years’ work of the cooperative, but also the contributions made by other international experts at the conference, focused on three broad themes: mixed building technology; structural integrity under exceptional actions; and urban design.
Download or read book Improvement of Buildings Structural Quality by New Technologies written by Christian Schauer and published by CRC Press. This book was released on 2005-01-20 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Launched in May 2000, the aims of the COST C12 cooperative action were:to develop, combine and disseminate new technical engineering technologiesto improve the quality of urban buildingsto propose new technical solutions to architects and plannersto reduce the disturbance caused by construction in urban areas and improve urban quality of life.This
Download or read book Improvement of buildings structural quality by new technologies written by Luis Simones da Silva and published by . This book was released on 2003 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improvement of Buildings Structural Quality by New Technologies written by Christian Schauer and published by CRC Press. This book was released on 2005-01-20 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Around 100 scientists from 21 countries contributed to the four years of assembled works contained in this volume. Launched in May 2000, the aims of this cooperative action were: * to develop, combine and disseminate new technical engineering technologies * to improve the quality of urban buildings * to propose new technical solutions to architects and planners * to reduce the disturbance caused by construction in urban areas and improve urban quality of life. This publication is the final report of COST C12, and includes datasheets of key information related to mixed building technology, structural integrity under exception actions, and urban design.
Download or read book Cost C16 Improving the Quality of Existing Urban Building Envelopes written by Luís Bragança and published by IOS Press. This book was released on 2007 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of changes in the composition of the population, society changes continuously with respect to various factors including age-structure, family composition and the availability of energy. Changes lead to situations that are reflected in the commissioning of buildings, which is gradually shifted from new construction to the reuse and renovation of existing buildings. The adaptation of buildings often requires the modification of facades and the construction behind. The scope of this action withinthe COST Transport and Urban Development Domain is to improve techniques and methods for envelopes of buildings constructed during the last half of the 20th century in the COST countries. In other words it is directed on the building envelopes of the so-clled non-traditional buildings. This publication is based on a support by COST, an intergovernmental European framework for international cooperation between nationally funded research activities. COST creates scientific networks and enables scientists tocollaborate in a wide spectrum of activities in research and technology.
Download or read book Cost C16 Improving the Quality of Existing Urban Building Envelopes written by Roberto Di Giulio and published by IOS Press. This book was released on 2007 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of changes in the composition of the population, society changes continuously with respect to various factors including age-structure, family composition and the availability of energy. Changes lead to situations that are reflected in the commissioning of buildings, which is gradually shifted from new construction to the reuse and renovation of existing buildings. The adaptation of buildings often requires the modification of facades and the construction behind. The scope of this action within the COST Transport and Urban Development Domain is to improve techniques and methods for envelopes of buildings constructed during the last half of the 20th century in the COST countries. In other words it is directed on the building envelopes of the so-called non-traditional buildings. This publication is based on a support by COST, an intergovernmental European framework for international cooperation between nationally funded research activities. COST creates scientific networks and enables scientists to collaborate in a wide spectrum of activities in research and technology.
Download or read book Cost C16 Improving the Quality of Existing Urban Building Envelopes written by Marie Therèse Andeweg and published by IOS Press. This book was released on 2007 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of changes in the composition of the population, society changes continuously with respect to various factors including age-structure, family composition and the availability of energy. Changes lead to situations that are reflected in the commissioning of buildings, which is gradually shifted from new construction to the reuse and renovation of existing buildings. The adaptation of buildings often requires the modification of facades and the construction behind. The scope of this action within the COST Transport and Urban Development Domain is to improve techniques and methods for envelopes of buildings constructed during the last half of the 20th century in the COST countries. In other words it is directed on the building envelopes of the so-called non-traditional buildings. This publication is based on a support by COST, an intergovernmental European framework for international cooperation between nationally funded research activities. COST creates scientific networks and enables scientists to collaborate in a wide spectrum of activities in research and technology.
Download or read book COST C16 Improving the Quality of Existing Urban Building Envelopes written by E. Melgaard and published by IOS Press. This book was released on 2007-04-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a support by COST, an intergovernmental European framework for international cooperation between nationally funded research activities, this work, which is within the COST Transport and Urban Development Domain, looks at improving the techniques for envelopes of buildings constructed in the last half of the 20th century in COST countries.
Download or read book The Power of Existing Buildings written by Robert Sroufe and published by . This book was released on 2019-11-12 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: In The Power of Existing Buildings, academic sustainability expert Robert Sroufe, and construction and building experts Craig Stevenson and Beth Eckenrode, explain how to realize the potential of existing buildings and make them perform like new. This step-by-step guide will help readers to: understand where to start a project; develop financial models and realize costs savings; assemble an expert team; and align goals with numerous sustainability programs. The Power of Existing Buildings will challenge you to rethink spaces where people work and play, while determining how existing buildings can save the world. The insights and practical experience of Sroufe, Stevenson, and Eckenrode, along with the project case study examples, provide new insights on investing in existing buildings for building owners, engineers, occupants, architects, and real estate and construction professionals.
Download or read book Construction Innovation and Process Improvement written by Akintola Akintoye and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in construction is essential for growth. The industry strives to remain competitive using a variety of approaches and needs to engage structured initiatives linked to proven innovation concepts, techniques and applications. Even in mature markets like the Architecture, Engineering and Construction (AEC) sector, where business behaviour is generally considered as being risk averse, it is increasingly important to embed innovation into mainstream business practices. In Construction Innovation and Process Improvement a number of wide ranging issues from construction practice in different countries with different contexts are presented to provide a rich collection of literature embracing theory and practice. Chapters are divided into three broad themes of construction innovation relating to: Theory and Practice; Process Drivers; and Future Technologies. Several questions are posed, including for example: What is particularly unique about construction innovation in theory and practice? What are the major drivers of construction innovation? What factors are needed to support and deliver future construction technologies? In attempting to respond to such questions, the book sheds new light on these challenges, and provides readers with a number of ways forward, especially cognisant of the increased role of globalisation, the enhanced impact of knowledge, and importance of innovation. All these can have a significant impact on strategic decision-making, competitive advantage, and sustainable policies and practices. Part One deals with change management, technology, sustainable construction, and supply chain management; Part Two addresses innovation and process improvement drivers, including strategic management, concurrent engineering, risk management, innovative procurement, knowledge management; Part Three explores future technologies in construction – and particularly, how these can be harnessed and leveraged to help procure innovation and process improvement.
Download or read book Euro Abstracts written by and published by . This book was released on 2004 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances and Technologies in Building Construction and Structural Analysis written by Alireza Kaboli and published by BoD – Books on Demand. This book was released on 2021-12-22 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Edited Volume “Advances and Technologies in Building Construction and Structural Analysis” is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of advances and technologies in building construction and structural analysis. The book comprises single chapters authored by various researchers and edited by an expert active in the alternative medicine research area. All chapters are complete in themselves but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on advances and technologies in building construction and structural analysis and opening new possible research paths for further novel developments.
Download or read book Sustainable Construction Technologies written by Vivian Y. Tam and published by Butterworth-Heinemann. This book was released on 2019-01-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Technologies: Life-Cycle Assessment provides practitioners with a tool to help them select technologies that are financially advantageous even though they have a higher initial cost. Chapters provide an overview of LCA and how it can be used in conjunction with other indicators to manage construction. Topics covered include indoor environment quality, energy efficiency, transport, water reuse, materials, land use and ecology, and more. The book presents a valuable tool for construction professionals and researchers that want to apply sustainable construction techniques to their projects. Practitioners will find the international case studies and discussions of worldwide regulation and standards particularly useful. Provides a framework for analyzing sustainable construction technologies and economic viability Introduces key credit criteria for different sustainable construction technologies Covers the most relevant construction areas Includes technologies that can be employed during the process of construction, or to the product of the construction process, i.e. buildings Analyzes international rating systems and provides supporting case studies
Download or read book The Role of Public Agencies in Fostering New Technology and Innovation in Building written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores innovation in the U.S. construction-related industries (i.e., design services, construction, building materials and products manufacture, and facilities operation and maintenance) and recommends a strategy for fostering new technology. These industries account for about ten percent of the U.S. economy; federal agencies themselves spend some $15 billion annually on construction. A government strategy based on federal agencies that encourage applications of new technology for their own projects, activities to enhance the pursuit and effective transfer of new technology to the U.S. private sector, and increased support for targeted efforts to develop new technologies in specific areas will yield many benefits. These include better cost, quality, and performance in government facilities, generally improved quality of life, and enhanced U.S. industrial competitiveness in international markets.
Download or read book Technological Advancements in Building Construction written by Mohammad Arif Kamal and published by Eliva Press. This book was released on 2021-06-19 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological progress has introduced many innovations in the field of the construction industry. In recent years, the building construction industry is continuously being updated and upgraded with the latest technologies to improve the cost, safety, efficiency, and quality of construction. Construction is essentially the process of moving and assembling materials and equipment into a completed, operational facility. Technology adds significant value at every stage of construction, from planning to the commission, by optimizing efficiency and productivity. The building construction technology covers a wide range of modern techniques and practices that encompass the latest developments in materials technology and their applications, design procedures, quantity surveying, structural analysis and design, the functioning of components and systems, procedures and details of building assembly and so on. New advanced materials offer opportunities to change how we construct and retrofit buildings. They give added value in terms of increased performance and functionality. The use of machinery and automation has made its way through the civil engineering, architectural and construction industries. In the rapidly changing scenario of the building sector, architects, engineers and builders should search for new construction technologies to adopt in future constructions that benefit energy efficiency, resources and water conservation, improved indoor air quality, life cycle cost reduction, durability and low maintenance. Therefore, to attain these objectives, application and knowledge of latest advancements in various building construction technologies are of prime concern. This book 'Technological Advancements in Building Construction' contains Six chapters that introduce some scientific methods and state-of-the-art building technologies that may be beneficial to architects, engineers, building scientists and construction industry professionals.
Download or read book Innovation in Construction written by Seyed Hamidreza Ghaffar and published by Springer Nature. This book was released on 2022-03-23 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles the complex topic of implementing innovation and the successful application of advanced technology in the construction industry. It provides a practical guide for the transformation of the industry by detailing appropriate and effective implementation methods, required skill sets and structural changes necessary to facilitate the practical and innovative application of technology. The construction industry is behind other industries in its level of innovation and adoption of technology, and is of critical importance to many of today’s global challenges, such as climate change, global warming and resource scarcity. There is therefore a need for smarter and more efficient ways of managing available resources. This book elaborates on how the innovative application of technology could offer hope for the construction industry in it’s imperative to rise to current and future global challenges. It includes the real-world case studies of innovative projects that go beyond the current state-of-the-art academic research, and have improved productivity, quality and performance in the construction sector. This book provides readers from both industrial and academic backgrounds with a comprehensive guide on transforming the construction industry with the efficient and effective implementation of technologies and modern methods of construction.
