Download or read book Rubber Recycling written by Sadhan K. De and published by CRC Press. This book was released on 2005-06-14 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe disposal and reuse of industrial and consumer rubber waste continues to pose a serious threat to environmental safety and health, despite the fact that the technology now exits for its effective recycling and reuse. Mountains of used tires confirm the belief that chemically crosslinked rubber is one of the most difficult materials to recyc

Download or read book Adhesive Bonding written by Robert D. Adams and published by Woodhead Publishing. This book was released on 2021-07-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive Bonding: Science, Technology and Applications, Second Edition guides the reader through the fundamentals, mechanical properties and applications of adhesive bonding. This thoroughly revised and expanded new edition reflects the many advances that have occurred in recent years. Sections cover the fundamentals of adhesive bonding, explaining how adhesives and sealants work, and how to assess and treat surfaces, how adhesives perform under stress and the factors affecting fatigue and failure, stress analysis, environmental durability, non-destructive testing, impact behavior, fracture mechanics, fatigue, vibration damping, and applications in construction, automotive, marine, footwear, electrical engineering, aerospace, repair, electronics, biomedicine, and bonding of composites. With its distinguished editor and international team of contributors, this book is an essential resource for industrial engineers, R&D, and scientists working with adhesives and their industrial applications, as well as researchers and advanced students in adhesion, joining, polymer science, materials science and mechanical engineering. - Offers detailed, methodical coverage of the fundamentals, mechanical properties and industrial applications of adhesive bonding - Enables the successful preparation of adhesives for a broad range of important load-bearing applications in areas such as automotive and aerospace, construction, electronics and biomedicine - Covers the latest advances in adhesive bonding, including improved repair techniques for metallic and composite structures, cohesive zone modeling, and disassembly and recycling

Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. - Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties - Explores novel applications of natural rubber across a range of industries, including current and potential uses - Discusses resources and utilization, and considers sustainable future development of natural rubber

Download or read book Current Topics in Elastomers Research written by Anil K. Bhowmick and published by CRC Press. This book was released on 2008-05-07 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: From weather-proof tires and artificial hearts to the o-rings and valve seals that enable successful space exploration, rubber is an indispensable component of modern civilization. Stiff competition and stringent application requirements foster continuous challenges requiring manufacturers to fund ever-expanding research projects. However, this vas

Download or read book Progress in Adhesion and Adhesives Volume 4 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2019-07-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: A solid collection of interdisciplinary review articles on the latest developments in adhesion science and adhesives technology With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series "Progress in Adhesion and Adhesives"), the present volume comprises 9 review articles published in Volume 6 (2018) of Reviews of Adhesion and Adhesives. The subject of these reviews fall into the following general areas: 1. Adhesion to wood and wood bonds 2. Adhesive joints 3. Adhesion in microelectronic packaging 4. Surface modification 5. Contact angle, wettability and surface free energy. The topics covered include: Adhesion phenomena in microelectronic packaging; adhesives for wood and lignocellulosic materials; adhesion to wood and lignocellulosic materials; adhesively bonded lap joints having bi-adhesive and modulus-graded bondlines; adhesion between compounded elastomers; applications of contact angle measurements in pharmaceuticals and foods; oxygen or ammonia plasma treatment of polyolefin surfaces; surface free energy determination of powders and particles; wood bonds; and dispersion adhesion forces between macroscopic objects.

Download or read book Rubber Bonding Conference written by and published by iSmithers Rapra Publishing. This book was released on 1998 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Adhesion written by D. E. Packham and published by John Wiley & Sons. This book was released on 2006-02-08 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the successful Handbook of Adhesion provides concise and authoritative articles covering many aspects of the science and technology associated with adhesion and adhesives. It is intended to fill a gap between the necessarily simplified treatment of the student textbook and the full and thorough treatment of the research monograph and review article. The articles are structured in such a way, with internal cross-referencing and external literature references, that the reader can build up a broader and deeper understanding, as their needs require. This second edition includes many new articles covering developments which have risen in prominence in the intervening years, such as scanning probe techniques, the surface forces apparatus and the relation between adhesion and fractal surfaces. Advances in understanding polymer - polymer interdiffusion are reflected in articles drawing out the implications for adhesive bonding. In addition, articles derived from the earlier edition have been revised and updated where needed. Throughout the book there is a renewed emphasis on environmental implications of the use of adhesives and sealants. The scope of the Handbook, which features nearly 250 articles from over 60 authors, includes the background science - physics, chemistry and material science - and engineering, and also aspects of adhesion relevant to the use of adhesives, including topics such as: Sealants and mastics Paints and coatings Printing and composite materials Welding and autohesion Engineering design The Handbook of Adhesion is intended for scientists and engineers in both academia and industry, requiring an understanding of the various facets of adhesion.

Download or read book Rubber as a Construction Material for Corrosion Protection written by V. C. Chandrasekaran and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book on rubber used as a construction material dedicated to the chemical process industry Despite the long history of rubber as a construction material, this book is a unique publication as it comprehensively looks at the material with respect to the anti-corrosion requirements of the multitude of industries where rubber is used, both on land and offshore. This guide documents how rubber reliably meets the threats of corrosion and contributes to the longevity of the equipment. Chapters on ebonite, natural, and synthetic rubbers, examine their relevant properties and chemical resistance. The book details the practical aspects and handling of rubber lined equipment: thin-walled structures, vacuum vessels, ducts, large diameter tanks, agitators, and fully lined pipes (both inside and outside). Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards. Several case studies are included demonstrating the preferential choice of rubber as a construction material as well as practical applications and techniques of its usage in the chlor-alkali, fertilizer, mineral processing and other core chemical processing industries, which are the largest consumers of rubber as a material of construction. The volume ends with a section on aging and prediction of service life. Rubber as a Construction Material for Corrosion Protection will be used by chemical engineers, rubber technologists, students, research workers worldwide in the rubber industry and process industries such as fertilizer, mining and ore, oil & gas, paper and pulp, steel plants, as well as people engaged in corrosion protection. The book will also be very useful to the construction industry.

Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Elsevier. This book was released on 2014-02-17 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing demand for more sustainable materials has led to increased research on the properties of natural rubber. Chemistry, Manufacture and Applications of Natural Rubber summarizes this research and its significance for the industrial applications of natural rubber. Chapters in part one explore the properties and processing of natural rubber, including the biosynthesis of natural rubber in different rubber-producing species, chemical modification of natural rubber for improved performance, and the effect of strain-induced crystallization on the physical properties of natural rubber. Further chapters highlight hydrophobic and hydrophilic silica-filled cross-linked natural rubber and computer simulation of network formation in natural rubber. Part two focusses on applications of natural rubber, including eco-friendly bio-composites using natural rubber matrices and reinforcements, soft bio-composites from natural rubber and marine products, natural rubber for the tire industry, the application of epoxidized natural rubber in pressure sensitive adhesives (PSAs), and the use of natural rubber for vibration isolation and earthquake protection of structures. Finally, chapters in part three consider environmental and safety issues associated with natural rubber, including improving the sustainable development of natural rubber, the recycling of natural and synthetic isoprene rubbers and of sulfur cross-linked natural rubber, and recent research on natural rubber latex allergy. Chemistry, Manufacture and Applications of Natural Rubber is a comprehensive resource for academics, chemists, chemical engineers, mechanical engineers, and other professionals in the rubber industry, as well as those industries, including automotive, civil, and medical engineering, using natural rubber products. - An updated review with systematic and comprehensive coverage of natural rubbers - Covers a broad range of topics, including the chemistry, processing, sustainability, and applications of natural rubbers - Coverage of the best international research, including key experts from Asia, the United States, South America, and Europe

Download or read book The Rubber Formulary written by Peter A. Ciullo and published by William Andrew. This book was released on 1999-12-31 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: A stable usage of rubber compounds in the production of components for almost every industry has created the need for this handbook and formulary. Convenience is the primary reason for such a book. With the variety of uses for rubber being as broad as the imagination, a formulary which includes an overview of the history of rubber, as well as sections on ingredients, processing methods, and testing, is a welcome addition to any manufacturer's library. Rubber products include seals and gaskets for windows, pressure and vacuum hoses for automotive and aerospace applications, bottle stoppers for medical and pharmaceutical products, center cores for all types of balls, belts for tools and machinery, shock and vibration absorbers for everything from motor mounts to sky scrapers, insulation for blankets, and even large film coatings for roofing applications. Additional industrial and consumer products are being designed out of rubber compounds every day.Whether you are involved with selling raw materials, producing rubber compounds, or designing rubber components and products, Rubber Formulary is the right sourcebook of data for your needs. This first-ever collection of 500 suggested formulas has been provided by raw materials suppliers around the world. Written for both technical and managerial personnel, this collection of formulas and basic texts will also benefit students and other individuals just entering the field.

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book Maro Polymer Notes written by and published by . This book was released on 1995 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Spectroscopy of Rubbers and Rubbery Materials written by Victor M. Litvinov and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of spectroscopic techniques for characterisation of chemical and physical structures in viscoelastic materials, such as unvulcanised elastomers and their vulcanisates, various rubbery materials and some plastics, which when blended with particular additives (plasticisers) behave like rubbers. Analysis of the rubbery materials is complicated by the fact that rubbery products, such as tyres, tubes, seals, V-belts and hoses, contain in the rubbery matrix a significant amount of various compounds, i.e., fillers, vulcanising agents, antioxidants and plasticisers. Due to the complex composition, no single technique can provide a good understanding of the effect of chemical and physical structures on the functional properties of rubbery materials. Thus spectroscopy has become a powerful tool for the determination of polymer structures. The most comprehensive information on chemical and physical structures in relation to material properties can be obtained by using a combination of macroscopic techniques and methods that provide information on the molecular level. frequently used for analysis of rubbery materials, i.e., various methods of nuclear magnetic resonance (NMR) and optical spectroscopy. The main objective of this present book is to discuss a wide range of applications of the spectroscopic techniques for the analysis of rubbery materials. The book brings together the various spectroscopic techniques for obtaining the following information: chemical structure of rubbery materials, network structure analysis, heterogeneity of rubbery materials, physical properties of rubbery materials, functional properties and stability of rubbery materials, processing of rubbery materials and quality control. The contents of this book are of interest to chemists, physicists, material scientists and technologists who seek a better understanding of rubbery materials.

Download or read book Rubber to Rubber Adhesion written by Dinesh Kumar Kotnees and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: RUBBER TO RUBBER ADHESION Readers will get helpful ideas and in-depth knowledge about various aspects of rubber to rubber adhesion with particular reference to theory and practice. This book covers various aspects of rubber to rubber adhesion which is important theoretically, as well as having practical implications. Rubber is a polymer whose glass transition temperature is well below the room temperature and hence the chains are very mobile at room and higher temperatures, making the material very versatile. Rubber is used in a large number of applications ranging from underground mining to tire to space vehicles. In all these cases, compounded rubbers are used in laminates and joined. The higher the adhesion, the higher will be the joint strength. The principles taught in adhesion science and technology are extensively used to prepare better joints and more useful products. The book serves to satisfy a wide range of disciplines (polymers, materials, chemical, chemistry, mechanical, etc.) and starts with an introduction on rubber, then characterization of rubber, rubber surface and joints and, finally, other chapters on rubber to rubber adhesion. Scientific aspects to understand the technology are highlighted. It gives a comprehensive treatment on adhesion between unvulcanized elastomers, self-healing of elastomers, adhesion between compounded elastomers by co-crosslinking, adhesion between partially vulcanized compounded rubber and partially vulcanized compounded rubber, adhesion between vulcanized rubber and unvulcanized rubber- or partially vulcanized rubber, and adhesion between vulcanized rubber and vulcanized rubber. Audience The book will be used by academicians in polymer science, materials science, chemical and mechanical engineering, chemistry, R & D personnel, industry people, as well as rubber and adhesion practitioners.

Download or read book Raw Materials Supply Chain for Rubber Products written by John S. Dick and published by Hanser Pub Incorporated. This book was released on 2014-06-30 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rubber industry is a vital part of the world economy. In this age of constantly changing economics and raw material "shortages of the week," this book should help the reader understand the overall technical and economic problems that are emerging which are beginning to affect the overall availability of many raw materials, chemical intermediates and final rubber products on the world scene. This book is truly unique in that it is the only one that traces all the important organic and inorganic synthesis routes for the manufacture of synthetic rubbers, various fillers, plasticizers, oils, curatives, antidegradants, adhesion promoters, flame retardants, tackifiers, and blowing agents through their respective intermediates to the base raw materials from earth extractions and agriculture.

Download or read book British Abstracts written by and published by . This book was released on 1953 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies