Download or read book Proceedings written by and published by . This book was released on 2000 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iron and Steel Engineer written by and published by . This book was released on 1996 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the proceedings of the Association.
Download or read book General Catalogue of Publications written by Office for Official Publications of the European Communities and published by . This book was released on 1999 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steelmaking Conference Proceedings written by and published by . This book was released on 1981 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology of Casting Processes written by Malur Srinivasan and published by BoD – Books on Demand. This book was released on 2012-09-26 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various science and technology factors that need careful consideration in producing a casting. It consists of 11 chapters contributed by experts in their respective fields. The topics include simulation of continuous casting process, control of solidification of continuous castings, influence of mold flux in continuous casting, segregation in strip casting of steel, developments in shell and solid investment mold processes, innovative pressure control during filling of sand molds, fracture toughness specifically of castings, permanent molding of cast iron, wear resistant castings and improvement of accuracy in estimating graphite nodularity in ductile iron castings.
Download or read book Casting Processes and Modelling of Metallic Materials written by Zak Abdallah and published by BoD – Books on Demand. This book was released on 2021-02-24 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Casting Processes and Modelling of Metallic Materials, explores the various casting and modelling activities related to metallic alloy systems. The book provides results of research work conducted by experts from all over the globe to add to the research community in the era of the casting process and modelling. The book was edited by two experts in the field of materials science and modelling, Dr. Abdallah and Dr. Aldoumani, whom both have several publications in peer-reviewed journals, worldwide conferences, and scientific books. The book introduces the casting processes and then discusses the various issues and possible solutions. Over the past years, various models have been proposed and utilized to predict the performance of castings. Some of these models proved to be accurate whereas others failed to predict the casting performance. The strength of any predictive tool depends on the employment of physically meaningful parameters that replicate the real-life conditions. This has been illustrated in the current book with such predictive models and finite element (FE) modelling to illustrate the behaviour of castings in real-life conditions.
Download or read book The Casting Powders Book written by Kenneth C. Mills and published by . This book was released on 2017 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Metal Manufacturing Processes written by J. Beddoes and published by Butterworth-Heinemann. This book was released on 1999-05-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are still the most widely used structural materials in the manufacture of products and structures. Their properties are extremely dependent on the processes they undergo to form the final product. Successful manufacturing therefore depends on a detailed knowledge of the processing of the materials involved. This highly illustrated book provides that knowledge.Metal processing is a technical subject requiring a quantitative approach. This book illustrates this approach with real case studies derived from industry. - Real industrial case studies - Quantitative approach - Challenging student problems
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Materials Processing Fundamentals written by Lifeng Zhang and published by Springer. This book was released on 2016-12-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection provides researchers and industry professionals with complete guidance on the synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Along with the fundamentals, it covers modeling of diverse phenomena in processes involving iron, steel, non-ferrous metals, and composites. It also goes on to examine second phase particles in metals, novel sensors for hostile-environment materials processes, online sampling and analysis techniques, and models for real-time process control and quality monitoring systems.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.
Download or read book Fundamentals of Metallurgy written by S Seetharaman and published by Elsevier. This book was released on 2005-10-10 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: As product specifications become more demanding, manufacturers require steel with ever more specific functional properties. As a result, there has been a wealth of research on how those properties emerge during steelmaking. Fundamentals of metallurgy summarises this research and its implications for manufacturers.The first part of the book reviews the effects of processing on the properties of metals with a range of chapters on such phenomena as phase transformations, types of kinetic reaction, transport and interfacial phenomena. Authors discuss how these processes and the resulting properties of metals can be modelled and predicted. Part two discusses the implications of this research for improving steelmaking and steel properties.With its distinguished editor and international team of contributors, Fundamentals of metallurgy is an invaluable reference for steelmakers and manufacturers requiring high-performance steels in such areas as automotive and aerospace engineering. It will also be useful for those dealing with non-ferrous metals and alloys, material designers for functional materials, environmentalists and above all, high technology industries designing processes towards materials with tailored properties. - Summarises key research and its implications for manufacturers - Essential reading for steelmakers and manufacturers - Written by leading experts from both industry and academia
Download or read book Biomass Gasification and Pyrolysis written by Prabir Basu and published by Academic Press. This book was released on 2010-07-19 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown. Includes step-by-step design procedures and case studies for Biomass GasificationProvides worked process flow diagrams for gasifier design. Covers integration with other technologies (e.g. gas turbine, engine, fuel cells)
Download or read book Basic Concepts of Iron and Steel Making written by Sujay Kumar Dutta and published by Springer Nature. This book was released on 2020-03-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.
Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
