Download or read book Implementing 802 11 with Microcontrollers written by and published by . This book was released on 2005* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Implementing 802 11 with Microcontrollers Wireless Networking for Embedded Systems Designers written by Fred Eady and published by Elsevier. This book was released on 2005-10-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless networking is poised to have a massive impact on communications, and the 802.11 standard is to wireless networking what Ethernet is to wired networking. There are already over 50 million devices using the dominant IEEE 802.11 (essentially wireless Ethernet) standard, with astronomical growth predicted over the next 10 years. New applications are emerging every day, with wireless capability being embedded in everything from electric meters to hospital patient tracking systems to security devices. This practical reference guides readers through the wireless technology forest, giving them the knowledge, the hardware and the software necessary to design a wireless embedded device rapidly, inexpensively, and effectively. Using off-the-shelf microcontrollers from Microchip and Atmel, the author provides step-by-step instructions for designing the hardware and firmware for a fully operational wireless networking device. The book gives a thorough introduction to 802.11 technology and puts it into perspective against the other wireless standard options. Just enough theory and mathematics is provided to give the depth of understanding needed for practical design work. The book thoroughly covers: * Laptop wireless Ethernet card introduction and theory *Introduction to CompactFlash-to-microcontroller interfacing * Implementing the laptop wireless Ethernet card in an embedded environment Covers the hottest new embedded market area- wireless networking Shows designers how to save money and time by using microcontrollers in their embedded wireless designs instead of expensive, complex prefab boards
Download or read book Networking and Internetworking with Microcontrollers written by Fred Eady and published by Elsevier. This book was released on 2004-04-30 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sophisticated networking and communications capabilities that were previously the sole domain of mainframes, PCs, and workstations are now becoming mandatory in the realm of smaller embedded microcontrollers. However, documentation, standards, and design information is scattered among many sources and is difficult to find. In this practical book, popular columnist and embedded designer Fred Eady is your guide and advisor. He pulls together all the necessary design background and details and shows you how to use today’s affordable microcontrollers for powerful communications and networking applications such as local area networks and embedded internet. Using working code examples and schematics, Eady steers you through the basics using two popular microcontroller families, PIC and Atmel. Included are a wealth of detailed design examples for:· RS-232 firmware and hardware· Microcontroller USARTs· The I2C bus· Ethernet implementation· Embedded internet implementation· Wireless linksSample source code is provided and thoroughly explained for all the application examples. The accompanying CD-ROM contains the example code as well as a searchable ebook version of the text, to help you get up to speed quickly. You could spend days or even weeks pulling together all the information that Eady has assembled in this one indispensable reference. * The only source that pulls together difficult-to-find design information, and teaches step-by-step how to use it to create powerful networking applications* Includes fully functional examples of microcontroller hardware and firmware* Companion cd-rom includes all schematics and code utilized in the book
Download or read book Programming 16 Bit PIC Microcontrollers in C written by Lucio Di Jasio and published by Elsevier. This book was released on 2011-12-14 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide by Microchip insider Lucio Di Jasio teaches readers everything they need to know about the architecture of these new chips: how to program them, how to test them, and how to debug them.
Download or read book Programming 32 bit Microcontrollers in C written by Lucio Di Jasio and published by Elsevier. This book was released on 2011-04-08 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: *Just months after the introduction of the new generation of 32-bit PIC microcontrollers, a Microchip insider and acclaimed author takes you by hand at the exploration of the PIC32*Includes handy checklists to help readers perform the most common programming and debugging tasksThe new 32-bit microcontrollers bring the promise of more speed and more performance while offering an unprecedented level of compatibility with existing 8 and 16-bit PIC microcontrollers. In sixteen engaging chapters, using a parallel track to his previous title dedicated to 16-bit programming, the author puts all these claims to test while offering a gradual introduction to the development and debugging of embedded control applications in C. Author Lucio Di Jasio, a PIC and embedded control expert, offers unique insight into the new 32-bit architecture while developing a number of projects of growing complexity. Experienced PIC users and newcomers to the field alike will benefit from the text’s many thorough examples which demonstrate how to nimbly side-step common obstacles, solve real-world design problems efficiently and optimize code using the new PIC32 features and peripheral set. You will learn about:*basic timing and I/O operation*debugging methods with the MPLAB SIM *simulator and ICD tools*multitasking using the PIC32 interrupts*all the new hardware peripherals*how to control LCD displays*experimenting with the Explorer16 board and *the PIC32 Starter Kit*accessing mass-storage media*generating audio and video signals *and more!TABLE OF CONTENTSDay 1 And the adventure beginsDay 2 Walking in circlesDay 3 Message in a BottleDay 4 NUMB3RSDay 5 InterruptsDay 6 Memory Part 2 ExperimentingDay 7 RunningDay 8 Communication Day 9 LinksDay 10 Glass = BlissDay 11 It’s an analog worldPart 3 ExpansionDay 12 Capturing User InputsDay 13 UTubeDay 14 Mass StorageDay 15 File I/ODay 16 Musica Maestro! 32-bit microcontrollers are becoming the technology of choice for high performance embedded control applications including portable media players, cell phones, and GPS receivers. Learn to use the C programming language for advanced embedded control designs and/or learn to migrate your applications from previous 8 and 16-bit architectures.
Download or read book Hands on ZigBee written by Fred Eady and published by Newnes. This book was released on 2007 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its recent introduction, the ZigBee protocol has created an enormous amount of buzz in venues from magazine covers to trade show floors to water coolers. Its promise of providing a simpler, cheaper, more power-efficient WPAN (Wireless Personal Area Network) alternative to WiFi and Bluetooth has opened up new data collection possibilities in application areas from industrial controls to medical devices to intruder alarms. Yet, despite this widespread interest, there is still little information available that goes beyond detailing the spec itself. Missing from the current ZigBee lexicon is practical, application-oriented guidance from an expert, specifically geared to aid engineers in implementing this new technology. Enter respected designer and popular columnist Fred Eady! With his new book, he provides the only comprehensive how-to ZigBee guide available. ·The ONLY one-stop Zigbee resource available- from basics to sniffers to specs ·7 easy-to-assemble ZigBee projects allow the reader to follow along...hands-on! ·Working hardware and software examples included in every chapter
Download or read book Optical Wireless Communications written by Roberto Ramirez-Iniguez and published by CRC Press. This book was released on 2008-04-03 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades, interest in Infrared (IR) technology as a medium to convey information has grown considerably. This is reflected by the increasing number of devices such as laptops, PDAs, and mobile phones that incorporate optical wireless transceivers and also by the increasing number of optical wireless links available for indoor and
Download or read book Embedded Systems and Wireless Technology written by Raul A. Santos and published by CRC Press. This book was released on 2012-06-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential of embedded systems ranges from the simplicity of sharing digital media to the coordination of a variety of complex joint actions carried out between collections of networked devices. The book explores the emerging use of embedded systems and wireless technologies from theoretical and practical applications and their applications in agriculture, environment, public health, domotics, and public transportation, among others.
Download or read book Industrial Communication Systems written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2018-10-03 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition, Industrial Communications Systems combines traditional and newer, more specialized knowledge that helps industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Modern communication systems in factories use many different—and increasingly sophisticated—systems to send and receive information. Industrial Communication Systems spans the full gamut of concepts that engineers require to maintain a well-designed, reliable communications system that can ensure successful operation of any production process. Delving into the subject, this volume covers: Technical principles Application-specific areas Technologies Internet programming Outlook, including trends and expected challenges Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Control and Mechatronics Intelligent Systems
Download or read book Proceedings of the 6th China Aeronautical Science and Technology Conference written by Chinese Aeronautical Society and published by Springer Nature. This book was released on 2024-01-03 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the original peer-reviewed research papers presented at the 6th China Aeronautical Science and Technology Conference held in Wuzhen, Zhejiang Province, China, in September 2023. Topics covered include but are not limited to Navigation/Guidance and Control Technology, Aircraft Design and Overall Optimisation of Key Technologies, Aviation Testing Technology, Airborne Systems/Electromechanical Technology, Structural Design, Aerodynamics and Flight Mechanics, Advanced Aviation Materials and Manufacturing Technology, Advanced Aviation Propulsion Technology, and Civil Aviation Transportation. The papers presented here share the latest findings in aviation science and technology, making the book a valuable resource for researchers, engineers and students in related fields.
Download or read book Electronic Engineering and Information Science written by Dongxing Wang and published by CRC Press. This book was released on 2015-06-11 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference of Electronic Engineering and Information Science 2015 (ICEEIS 2015) was held on January 17-18, 2015, Harbin, China. This proceedings volume assembles papers from various researchers, engineers and educators engaged in the fields of electronic engineering and information science.The papers in this proceedings
Download or read book Measurement Instrumentation and Sensors Handbook written by John G. Webster and published by CRC Press. This book was released on 2017-12-19 with total page 1640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Spatial, Mechanical, Thermal, and Radiation Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 96 existing chapters Covers instrumentation and measurement concepts, spatial and mechanical variables, displacement, acoustics, flow and spot velocity, radiation, wireless sensors and instrumentation, and control and human factors A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Spatial, Mechanical, Thermal, and Radiation Measurement provides readers with a greater understanding of advanced applications.
Download or read book Embedded Systems Architecture written by Daniele Lacamera and published by Packt Publishing Ltd. This book was released on 2023-01-13 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design safe and reliable software for embedded systems and explore the internals of device drivers, RTOS, and TEE Key FeaturesIdentify and overcome challenges in embedded environmentsUnderstand and implement the steps required to increase the security of IoT solutionsBuild safety-critical and memory-safe parallel and distributed embedded systemsBook Description Embedded Systems Architecture begins with a bird's-eye view of embedded development and how it differs from the other systems that you may be familiar with. This book will help you get the hang of the internal working of various components in real-world systems. You'll start by setting up a development environment and then move on to the core system architectural concepts, exploring system designs, boot-up mechanisms, and memory management. As you progress through the topics, you'll explore the programming interface and device drivers to establish communication via TCP/IP and take measures to increase the security of IoT solutions. Finally, you'll be introduced to multithreaded operating systems through the development of a scheduler and the use of hardware-assisted trusted execution mechanisms. With the help of this book, you will gain the confidence to work with embedded systems at an architectural level and become familiar with various aspects of embedded software development on microcontrollers—such as memory management, multithreading, and RTOS—an approach oriented to memory isolation. What you will learnParticipate in the design and definition phase of an embedded productGet to grips with writing code for ARM Cortex-M microcontrollersBuild an embedded development lab and optimize the workflowSecure embedded systems with TLSDemystify the architecture behind the communication interfacesUnderstand the design and development patterns for connected and distributed devices in the IoTMaster multitasking parallel execution patterns and real-time operating systemsBecome familiar with Trusted Execution Environment (TEE)Who this book is for If you're a software developer or designer looking to learn about embedded programming, this is the book for you. You'll also find this book useful if you're a beginner or a less experienced embedded programmer on a quest to expand your knowledge on embedded systems.
Download or read book The Industrial Electronics Handbook Five Volume Set written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2011-03-04 with total page 4052 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial electronics systems govern so many different functions that vary in complexity-from the operation of relatively simple applications, such as electric motors, to that of more complicated machines and systems, including robots and entire fabrication processes. The Industrial Electronics Handbook, Second Edition combines traditional and new
Download or read book Mobile Computing written by Raj Kamal and published by Oxford University Press, USA. This book was released on 2007 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile Computing provides a comprehensive coverage of both the communication and computing aspects. The student-friendly style, numerous illustrative examples and exercises for each topic discussed make the text ideal for classroom learningMobile Computing is designed to serve as a textbook for students in the disciplines of computer science and engineering, electronics and communication engineering, and information technology. It describes the basic concepts of mobile computing and provides technical information about the variousaspects of the subject as also the latest technologies that are currently in use. The first few chapters present a balanced view of mobile computing as well as mobile communication, including the 2G and 3G communication systems, mobile IP, and mobile TCP. The subsequent chapters provide a systematicexplanation of mobile computing as a discipline in itself. The book provides an in-depth coverage of databases in mobile systems, methods of data caching, dissemination and synchronization, Bluetooth, IrDA and ZigBee protocols, data security, mobile ad hoc and wireless sensor networks, andprogramming languages and operating systems for mobile computing devices. Written in an easy-to-understand and student-friendly manner, the book includes several illustrative examples and sample codes. A comprehensive set of exercises is included at the end of each chapter.
Download or read book Advances in Information Systems Development written by Gabor Magyar and published by Springer Science & Business Media. This book was released on 2007-08-28 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph details the proceedings of the 15th International Conference on Information Systems Development. ISD is progressing rapidly, continually creating new challenges for the professionals involved. New concepts, approaches and techniques of systems development emerge constantly in this field. Progress in ISD comes from research as well as from practice. The aim of the Conference was to provide an international forum for the exchange of ideas and experiences between academia and industry, and to stimulate the exploration of new solutions.
