Download or read book Impact of Electron and Scanning Probe Microscopy on Materials Research written by David G. Rickerby and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute provided an opportunity for researchers in universities, industry and National and International Laboratories, from the disciplines ofmaterials science, physics, chemistry and engineering to meet together in an assessment of the impact of electron and scanning probe microscopy on advanced material research. Since these researchers have traditionally relied upon different approaches, due to their different scientific background, to advanced materials problem solving, presentations and discussion within the Institute sessions were initially devoted to developing a set ofmutually understood basic concepts, inherently related to different techniques ofcharacterization by microscopy and spectroscopy. Particular importance was placed on Electron Energy Loss Spectroscopy (EELS), Scanning Probe Microscopy (SPM), High Resolution Transmission and Scanning Electron Microscopy (HRTEM, HRSTEM) and Environmental Scanning Electron Microscopy (ESEM). It was recognized that the electronic structure derived directly from EELS analysis as well as from atomic positions in HRTEM or High Angle Annular Dark Field STEM can be used to understand the macroscopic behaviour of materials. The emphasis, however, was upon the analysis of the electronic band structure of grain boundaries, fundamental for the understanding of macroscopic quantities such as strength, cohesion, plasticity, etc.
Download or read book Advances in Scanning Probe Microscopy written by T. Sakurai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been many books published on scanning tunneling microscopy (STM), atomic force microscopy (AFM) and related subjects since Dr. Cerd Binnig and Dr. Heinrich Rohrer invented STM in 1982 and AFM in 1986 at IBM Research Center in Zurich, Switzerland. These two techniques, STM and AFM, now form the core of what has come to be called the 'scanning probe microscopy (SPM)' family. SPM is not just the most powerful microscope for scientists to image atoms on surfaces, but is also becoming an indispensable tool for manipulating atoms and molecules to construct man-made materials and devices. Its impact has been felt in various fields, from surface physics and chemistry to nano-mechanics, nano-electronics and medical science. Its influence will surely extend further as the years go by, beyond the reach of our present imagination, and new research applications will continue to emerge. This book, therefore, is not intended to be a comprehensive review or textbook on SPM. Its aim is to cover only a selected part of the active re search fields of SPM and related topics in which I have been directly involved over the years. These include the basic principles of STM and AFM, and their applications to fullerene film growth, SiC surface reconstructions, MBE (molecular beam epitaxy) growth of CaAs, atomic scale manipulation of Si surfaces and meso scopic work function.
Download or read book Scanning Probe Microscopy written by Sergei V. Kalinin and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will be devoted to the technical aspects of electrical and electromechanical SPM probes and SPM imaging on the limits of resolution, thus providing technical introduction into the field. This volume will also address the fundamental physical phenomena underpinning the imaging mechanism of SPMs.
Download or read book Scanning Probe Microscopy written by Bert Voigtländer and published by Springer. This book was released on 2015-02-24 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the operating principles of atomic force microscopy and scanning tunneling microscopy. The aim of this book is to enable the reader to operate a scanning probe microscope successfully and understand the data obtained with the microscope. The chapters on the scanning probe techniques are complemented by the chapters on fundamentals and important technical aspects. This textbook is primarily aimed at graduate students from physics, materials science, chemistry, nanoscience and engineering, as well as researchers new to the field.
Download or read book Applied Scanning Probe Methods III written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-04-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ning Tunneling Microscopy sig- led a new era in imaging. The sc- ning probes emerged as a new i- trument for imaging with a pre- sion suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the - gneticForceMicroscope,MFM,and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.
Download or read book Scanning Probe Microscopy of Functional Materials written by Sergei V. Kalinin and published by Springer Science & Business Media. This book was released on 2010-12-13 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to provide a general overview of the rapidly developing field of novel scanning probe microscopy (SPM) techniques for characterization of a wide range of functional materials, including complex oxides, biopolymers, and semiconductors. Many recent advances in condensed matter physics and materials science, including transport mechanisms in carbon nanostructures and the role of disorder on high temperature superconductivity, would have been impossible without SPM. The unique aspect of SPM is its potential for imaging functional properties of materials as opposed to structural characterization by electron microscopy. Examples include electrical transport and magnetic, optical, and electromechanical properties. By bringing together critical reviews by leading researchers on the application of SPM to to the nanoscale characterization of functional materials properties, this book provides insight into fundamental and technological advances and future trends in key areas of nanoscience and nanotechnology.
Download or read book Scanning Probe Microscopy and Spectroscopy written by Dawn Bonnell and published by John Wiley & Sons. This book was released on 2000-12-05 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to basic theory and contemporary applications across a wide range of research disciplines Over the past two decades, scanning probe microscopies and spectroscopies have gained acceptance as indispensable characterization tools for an array of disciplines. This book provides novices and experienced researchers with a highly accessible treatment of basic theory, alongside detailed examples of current applications of both scanning tunneling and force microscopies and spectroscopies. Like its popular predecessor, Scanning Probe Microscopy and Spectroscopy, Second Edition features contributions from distinguished scientists working in a wide range of specialties at university, commercial, and government research labs around the world. Chapters have been edited for clarity, conciseness, and uniformity of presentation to provide professionals with a concise working reference to scanning probe microscopic and spectroscopic principles, techniques, and practices. This Second Edition has been substantially revised and expanded to reflect important advances and new applications. In addition to numerous examples, the Second Edition features expanded coverage of electrostatic and magnetic force microscopies, near-field optical microscopies, and new applications of buried interfaces in nanomechanics, electrochemistry, and biology. Scanning Probe Microscopy and Spectroscopy, Second Edition is an indispensable working resource for surface scientists, microscopists, and spectroscopists in materials science, chemistry, engineering, biochemistry, physics, and the life sciences. It is also an unparalleled reference text for advanced undergraduates and graduate students in those fields.
Download or read book Applied Scanning Probe Methods II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-06-22 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ningTunnelingMicroscopysignaled a new era in imaging. The sc- ning probes emerged as a new - strument for imaging with a p- cision suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the M- netic Force Microscope, MFM, and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.
Download or read book Scanning Probe Microscopy Characterization Nanofabrication and Device Application of Functional Materials written by Paula Maria Vilarinho and published by Springer Science & Business Media. This book was released on with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Probe Microscopy and Spectroscopy written by Roland Wiesendanger and published by Cambridge University Press. This book was released on 1994-09-29 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation and manipulation of matter on the atomic scale have been revolutionised by scanning tunnelling microscopy and related scanning probe techniques. This book is the first to provide a clear and comprehensive introduction to this subject. Beginning with the theoretical background of scanning tunnelling microscopy, the design and instrumentation of practical STM and associated systems are described in detail, as are the applications of these techniques in fields such as condensed matter physics, chemistry, biology, and nanotechnology. Containing 350 illustrations, and over 1200 references, this unique book represents an ideal introduction to the subject for final-year undergraduates in physics or materials science. It will also be invaluable to graduate students and researchers in any branch of science where scanning probe techniques are used.
Download or read book Atomic Force Microscopy Scanning Tunneling Microscopy written by Samuel H. Cohen and published by Springer Science & Business Media. This book was released on 1994 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the first US Army Natick Research, Development and Engineering Center Symposium on [title], held in Natick, Mass., June 1993. The various symposium topics included application of AFM/STM in material sciences, polymers, physics, biology and biotechnology, along with recent developments including new probe microscopies. The procee.
Download or read book Scanning Probe Microscopy written by Bert Voigtländer and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the operating principles of atomic force microscopy and scanning tunneling microscopy. The aim of this book is to enable the reader to operate a scanning probe microscope successfully and understand the data obtained with the microscope. The chapters on the scanning probe techniques are complemented by the chapters on fundamentals and important technical aspects. This textbook is primarily aimed at graduate students from physics, materials science, chemistry, nanoscience and engineering, as well as researchers new to the field.
Download or read book Scanning Probe Microscopy written by Adam Foster and published by Springer. This book was released on 2006-06-28 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Probe Microscopy provides a comprehensive source of information for researchers, teachers, and graduate students about the rapidly expanding field of scanning probe theory. Written in the style of a textbook, it explains from scratch the theory behind today’s simulation techniques and gives examples of theoretical concepts through state-of-the-art simulations, including the means to compare these results with experimental data. The book provides the first comprehensive framework for electron transport theory with its various degrees of approximations used in today’s research, thus allowing extensive insight into the physics of scanning probes. Experimentalists will appreciate how the instrument's operation is changed by materials properties; theorists will understand how simulations can be directly compared to experimental data.
Download or read book Scanning Probe Microscopy for Energy Research written by Dawn A. Bonnell and published by World Scientific Publishing Company Incorporated. This book was released on 2013 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficiency and life time of solar cells, energy and power density of the batteries, and costs of the fuel cells alike cannot be improved unless the complex electronic, optoelectronic, and ionic mechanisms underpinning operation of these materials and devices are understood on the nanometer level of individual defects. Only by probing these phenomena locally can we hope to link materials structure and functionality, thus opening pathway for predictive modeling and synthesis. While structures of these materials are now accessible on length scales from macroscopic to atomic, their functionality has remained Terra Incognitae. In this volume, we provide a summary of recent advances in scanning probe microscopy studies of local functionality of energy materials and devices ranging from photovoltaics to batteries, fuel cells, and energy harvesting systems. Recently emergent SPM modes and combined SPM-electron microscopy approaches are also discussed. Contributions by internationally renowned leaders in the field describe the frontiers in this important field.
Download or read book Scanning Probe Microscopy written by Vijay Nalladega and published by BoD – Books on Demand. This book was released on 2012-04-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning probe microscopy (SPM) is one of the key enabling tools for the advancement for nanotechnology with applications in many interdisciplinary research areas. This book presents selected original research works on the application of scanning probe microscopy techniques for the characterization of physical properties of different materials at the nanoscale. The topics in the book range from surface morphology analysis of thin film structures, oxide thin layers and superconducting structures, novel scanning probe microscopy techniques for characterization of mechanical and electrical properties, evaluation of mechanical and tribological properties of hybrid coatings and thin films. The variety of topics chosen for the book underlines the strong interdisciplinary nature of the research work in the field of scanning probe microscopy.
Download or read book Springer Handbook of Microscopy written by Peter W. Hawkes and published by Springer Nature. This book was released on 2019-11-02 with total page 1561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features reviews by leading experts on the methods and applications of modern forms of microscopy. The recent awards of Nobel Prizes awarded for super-resolution optical microscopy and cryo-electron microscopy have demonstrated the rich scientific opportunities for research in novel microscopies. Earlier Nobel Prizes for electron microscopy (the instrument itself and applications to biology), scanning probe microscopy and holography are a reminder of the central role of microscopy in modern science, from the study of nanostructures in materials science, physics and chemistry to structural biology. Separate chapters are devoted to confocal, fluorescent and related novel optical microscopies, coherent diffractive imaging, scanning probe microscopy, transmission electron microscopy in all its modes from aberration corrected and analytical to in-situ and time-resolved, low energy electron microscopy, photoelectron microscopy, cryo-electron microscopy in biology, and also ion microscopy. In addition to serving as an essential reference for researchers and teachers in the fields such as materials science, condensed matter physics, solid-state chemistry, structural biology and the molecular sciences generally, the Springer Handbook of Microscopy is a unified, coherent and pedagogically attractive text for advanced students who need an authoritative yet accessible guide to the science and practice of microscopy.
Download or read book Scanning Probe Microscopes written by K. S. Birdi and published by CRC Press. This book was released on 2003-02-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Probe Microscopes: Applications in Science and Technology explains, analyzes, and demonstrates the most widely used microscope in the family of microscopes -- the scanning probe microscope. Beginning with an introduction to the development of SPMs, the author introduces the basics of scanning tunneling and atomic force microscopes (STMs an
