Download or read book Immittance Spectroscopy written by Mohammad A. Alim and published by John Wiley & Sons. This book was released on 2017-12-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the use of four complex plane formalisms (impedance, admittance, complex capacitance, and modulus) in a simultaneous fashion. The purpose of employing these complex planes for handling semicircular relaxation using a single set of measured impedance data (ac small-signal electrical data) is highly underscored. The current literature demonstrates the importance of template version of impedance plot whereas this book reflects the advantage of using concurrent four complex plane plots for the same data. This approach allows extraction of a meaningful equivalent circuit model attributing to possible interpretations via potential polarizations and operative mechanisms for the investigated material system. Thus, this book supersedes the limitations of the impedance plot, and intends to serve a broader community of scientific and technical professionals better for their solid and liquid systems. This book addresses the following highlighted contents for the measured data but not limited to the:- (1) Lumped Parameter/Complex Plane Analysis (LP/CPA) in conjunction with the Bode plots; (2) Equivalent circuit model (ECM) derived from the LP/CPA; (3) Underlying Operative Mechanisms along with the possible interpretations; (4) Ideal (Debye) and non-ideal (non-Debye) relaxations; and (5) Data-Handling Criteria (DHC) using Complex Nonlinear Least Squares (CNLS) fitting procedures.
Download or read book Immittance Spectroscopy written by Mohammad A. Alim and published by John Wiley & Sons. This book was released on 2017-12-12 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the use of four complex plane formalisms (impedance, admittance, complex capacitance, and modulus) in a simultaneous fashion. The purpose of employing these complex planes for handling semicircular relaxation using a single set of measured impedance data (ac small-signal electrical data) is highly underscored. The current literature demonstrates the importance of template version of impedance plot whereas this book reflects the advantage of using concurrent four complex plane plots for the same data. This approach allows extraction of a meaningful equivalent circuit model attributing to possible interpretations via potential polarizations and operative mechanisms for the investigated material system. Thus, this book supersedes the limitations of the impedance plot, and intends to serve a broader community of scientific and technical professionals better for their solid and liquid systems. This book addresses the following highlighted contents for the measured data but not limited to the:- (1) Lumped Parameter/Complex Plane Analysis (LP/CPA) in conjunction with the Bode plots; (2) Equivalent circuit model (ECM) derived from the LP/CPA; (3) Underlying Operative Mechanisms along with the possible interpretations; (4) Ideal (Debye) and non-ideal (non-Debye) relaxations; and (5) Data-Handling Criteria (DHC) using Complex Nonlinear Least Squares (CNLS) fitting procedures.
Download or read book Impedance Spectroscopy written by Evgenij Barsoukov and published by John Wiley & Sons. This book was released on 2018-03-19 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Essential Reference for the Field, Featuring Protocols, Analysis, Fundamentals, and the Latest Advances Impedance Spectroscopy: Theory, Experiment, and Applications provides a comprehensive reference for graduate students, researchers, and engineers working in electrochemistry, physical chemistry, and physics. Covering both fundamentals concepts and practical applications, this unique reference provides a level of understanding that allows immediate use of impedance spectroscopy methods. Step-by-step experiment protocols with analysis guidance lend immediate relevance to general principles, while extensive figures and equations aid in the understanding of complex concepts. Detailed discussion includes the best measurement methods and identifying sources of error, and theoretical considerations for modeling, equivalent circuits, and equations in the complex domain are provided for most subjects under investigation. Written by a team of expert contributors, this book provides a clear understanding of impedance spectroscopy in general as well as the essential skills needed to use it in specific applications. Extensively updated to reflect the field’s latest advances, this new Third Edition: Incorporates the latest research, and provides coverage of new areas in which impedance spectroscopy is gaining importance Discusses the application of impedance spectroscopy to viscoelastic rubbery materials and biological systems Explores impedance spectroscopy applications in electrochemistry, semiconductors, solid electrolytes, corrosion, solid state devices, and electrochemical power sources Examines both the theoretical and practical aspects, and discusses when impedance spectroscopy is and is not the appropriate solution to an analysis problem Researchers and engineers will find value in the immediate practicality, while students will appreciate the hands-on approach to impedance spectroscopy methods. Retaining the reputation it has gained over years as a primary reference, Impedance Spectroscopy: Theory, Experiment, and Applications once again present a comprehensive reference reflecting the current state of the field.
Download or read book Analytical Impedance Spectroscopy written by Lakshman Pandey and published by CRC Press. This book was released on 2023-12-22 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the subject of impedance spectroscopy starting from fundamentals through to latest applications in areas such as ceramics, piezoelectric, sensors, agriculture, food quality control, medical diagnostics, cancer research, and so forth. Within the ambit of impedance spectroscopy, plots simulated for useful equivalent circuit models, design of sample holder, necessary precautions to be taken during measurement are described. It further discusses development of softwares for analysis of experimental data and choice of the most appropriate equivalent circuit model. All the materials are supported by problems, answers, appendices and references. Features: Includes fundamentals, equivalent circuit modeling and analysis of data related to impedance spectroscopy. Presents experimental measurements in a nuts-and-bolts approach. Includes derivation of expressions for some selected models and values of immittance functions as frequency of measurements tend to zero and to infinity. Provides clear recipe for beginners for proceeding toward developing equivalent circuit models. Describes computer program for complex nonlinear least squares fitting with example of program IMPSPEC.BAS This book is aimed at senior undergraduate/graduate students and researchers in materials engineering, mechanical engineering, electrical engineering, chemical engineering, biomedical engineering, construction engineering, physics, chemistry, medical diagnostics, agriculture and dairy.
Download or read book Fractional Diffusion Equations and Anomalous Diffusion written by Luiz Roberto Evangelista and published by Cambridge University Press. This book was released on 2018-01-25 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a unified treatment of anomalous diffusion problems using fractional calculus in a wide range of applications across scientific and technological disciplines.
Download or read book Structure and Performance of Cements Second Edition written by P. Barnes and published by CRC Press. This book was released on 2002-11-01 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing together a multinational team of authors, this second edition of Structure and Performance of Cements highlights the latest global advances in the field of cement technology. Three broad categories are covered: basic materials and methods, cement extenders, and techniques of examination. Within these categories consideration has been given to environmental issues such as the use of waste materials in cement-burning as supplementary fuels and new and improved methods of instrumentation for examining structural aspects and performance of cements. This book also covers cement production, mineralogy and hydration, as well as the mechanical properties of cement, and the corrosion and durability of cementitious systems. Special cements are included, along with calcium aluminate and blended cements together with a consideration of the role of gypsum in cements. Structure and Performance of Cements is an invaluable key reference for academics, researchers and practitioners alike.
Download or read book Perovskite Solar Cells written by Shahzada Ahmad and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a thorough overview of perovskite research, written by leaders in the field of photovoltaics The use of perovskite-structured materials to produce high-efficiency solar cells is a subject of growing interest for academic researchers and industry professionals alike. Due to their excellent light absorption, longevity, and charge-carrier properties, perovskite solar cells show great promise as a low-cost, industry-scalable alternative to conventional photovoltaic cells. Perovskite Solar Cells: Materials, Processes, and Devices provides an up-to-date overview of the current state of perovskite solar cell research. Addressing the key areas in the rapidly growing field, this comprehensive volume covers novel materials, advanced theory, modelling and simulation, device physics, new processes, and the critical issue of solar cell stability. Contributions by an international panel of researchers highlight both the opportunities and challenges related to perovskite solar cells while offering detailed insights on topics such as the photon recycling processes, interfacial properties, and charge transfer principles of perovskite-based devices. Examines new compositions, hole and electron transport materials, lead-free materials, and 2D and 3D materials Covers interface modelling techniques, methods for modelling in two and three dimensions, and developments beyond Shockley-Queisser Theory Discusses new fabrication processes such as slot-die coating, roll processing, and vacuum sublimation Describes the device physics of perovskite solar cells, including recombination kinetics and optical absorption Explores innovative approaches to increase the light conversion efficiency of photovoltaic cells Perovskite Solar Cells: Materials, Processes, and Devices is essential reading for all those in the photovoltaic community, including materials scientists, surface physicists, surface chemists, solid state physicists, solid state chemists, and electrical engineers.
Download or read book Propulsion Systems for Hybrid Vehicles written by John M. Miller and published by IET. This book was released on 2008 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering in-depth coverage of hybrid propulsion topics, energy storage systems and modelling, and supporting electrical systems, this book will be an invaluable resource for practising engineers and managers involved in all aspects of hybrid vehicle development, modelling, simulation and testing.
Download or read book Utilizing Ready Mix Concrete and Mortar written by Ravindra K. Dhir and published by Thomas Telford. This book was released on 1999 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete will be the key material for Mankind to create the built environment of the next millennium. The requirements of this infrastructure will be both demanding, in terms of technical performance and economy, and yet be greatly varied, from architectural masterpieces to the simplest of utilities.Utilizing ready mixed concrete and mortar forms the Proceedings of the three day International Conference held during the Congress, Creating with Concrete, 6-10 September 1999, organised by the Concrete technology unit, University fo Dundee.
Download or read book Handbook of Nanophase and Nanostructured Materials Characterization written by Zhong Lin Wang and published by 清华大学出版社有限公司. This book was released on 2003 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 纳米相和纳米结构材料是纳米科学和纳米技术的基础。纳米相和纳米结构材料手册是一套综述纳米学科在材料合成、结构和性能表征、理论模拟、实际应用和发展前沿的书籍。本书是这套丛书的第二本。书中内容详细阐述分析表征纳米材料的方法和技术。主要围绕表征技术在分析纳米材料原子结构和物理化学性能中的原理、数据分析过程和具体应用,并介绍了各种方法的最新进展和参考文献。
Download or read book Industrial Instrumentation and Control Systems written by Prasad Yarlagadda and published by Trans Tech Publications Ltd. This book was released on 2012-12-13 with total page 3670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the topics of: instrument design and measurement theory, reliability of instruments and fault diagnosis, precision instruments and computer vision, automation instruments, electrical and electronic instruments and equipment, sensors and their application, control technologies and applications, fluid power transmission and control, mechatronics, modeling, analysis and simulation, artificial intelligence, industrial robots and automation, automotive control systems, intelligent traffic control, CAD/CAM/CAE/CIM, optoelectronic technology, embedded systems, communication technology and network security, software development and mathematical modeling, computer applications in industry and engineering, the internet.
Download or read book Soft Matter at Aqueous Interfaces written by Peter Lang and published by Springer. This book was released on 2015-12-24 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the science of interfaces between an aqueous phase and a solid, another liquid or a gaseous phase, starting from the basic physical chemistry all the way to state-of-the-art research developments. Both experimental and theoretical methods are treated thanks to the contributions of a distinguished list of authors who are all active researchers in their respective fields. The properties of these interfaces are crucial for a wide variety of processes, products and biological systems and functions, such as the formulation of personal care and food products, paints and coatings, microfluidic and lab-on-a-chip applications, cell membranes, and lung surfactants. Accordingly, research and expertise on the subject are spread over a broad range of academic disciplines and industrial laboratories. This book brings together knowledge from these different places with the aim of fostering education, collaborations and research progress.
Download or read book Electrochemistry in Ionic Liquids written by Angel A. J. Torriero and published by Springer. This book was released on 2015-07-17 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of two books dedicated to presenting the latest novel and advanced research from around the world in this exciting area. These books highlight the important properties of electrochemistry in ionic liquids – as opposed to the more commonly used aqueous and organic environments – and the many applications. Readers will find 20 chapters gathered in two books: The first volume critically discusses electrode-electrolyte interfacial processes, reference electrodes, ultramicroelectrode voltammetry and scanning electrochemical microscopy, semi-integral and convolution voltammetry, and small-angle X-ray scattering coupled with voltammetry. The structure and properties of protic ionic liquids, deep-eutectic solvents, task-specific ionic liquids, polymeric ion gels, and lithium-ion solvation, useful for electrochemical application is also critically discussed The second volumes major topics covered in this book include electrodeposition and electroless deposition, voltammetry of adhered microparticles, electrochemistry of organic and organometallic compounds, electrocatalytic reactions, oxygen reduction reaction, ionic liquids in surface protection and lubrication, current industrial application of ionic liquids, and challenges, issues and recycling methods of ionic liquids in industrial developments.
Download or read book Dynamics of Glassy Crystalline and Liquid Ionic Conductors written by Junko Habasaki and published by Springer. This book was released on 2016-10-19 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the physics of the dynamics of ions in various ionically conducting materials, and applications including electrical energy generation and storage. The experimental techniques for measurements and characterization, molecular dynamics simulations, the theories of ion dynamics, and applications are all addressed by the authors, who are experts in their fields. The experimental techniques of measurement and characterization of dynamics of ions in glassy, crystalline, and liquid ionic conductors are introduced with the dual purpose of introducing the reader to the experimental activities of the field, and preparing the reader to understand the physical quantities derived from experiments. These experimental techniques include calorimetry, conductivity relaxation, nuclear magnetic resonance, light scattering, neutron scattering, and others. Methods of molecular dynamics simulations are introduced to teach the reader to utilize the technique for practical applications to specific problems. The results elucidate the dynamics of ions on some issues that are not accessible by experiments. The properties of ion dynamics in glassy, crystalline and liquid ionic conductors brought forth by experiments and simulations are shown to be universal, i.e. independent of physical and chemical structure of the ionic conductor as long as ion-ion interaction is the dominant factor. Moreover these universal properties of ion dynamics are shown to be isomorphic to other complex interacting systems including the large class of glass-forming materials with or without ionic conductivity.By covering the basic concepts, theories/models, experimental techniques and data, molecular dynamics simulations, and relating them together, Dynamics of Glassy, Crystalline and Liquid Ionic Conductors will be of great interest to many in basic and applied research areas from the broad and diverse communities of condensed matter physicists, chemists, materials scientists and engineers. The book also provides the fundamentals for an introduction to the field and it is written in such a way that can be used for teaching courses either at the undergraduate or graduate level in academic institutions.
Download or read book Computational Modeling in Biomedical Engineering and Medical Physics written by Alexandru Morega and published by Academic Press. This book was released on 2020-09-15 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical and numerical modelling of engineering problems in medicine is aimed at unveiling and understanding multidisciplinary interactions and processes and providing insights useful to clinical care and technology advances for better medical equipment and systems. When modelling medical problems, the engineer is confronted with multidisciplinary problems of electromagnetism, heat and mass transfer, and structural mechanics with, possibly, different time and space scales, which may raise concerns in formulating consistent, solvable mathematical models. Computational Medical Engineering presents a number of engineering for medicine problems that may be encountered in medical physics, procedures, diagnosis and monitoring techniques, including electrical activity of the heart, hemodynamic activity monitoring, magnetic drug targeting, bioheat models and thermography, RF and microwave hyperthermia, ablation, EMF dosimetry, and bioimpedance methods. The authors discuss the core approach methodology to pose and solve different problems of medical engineering, including essentials of mathematical modelling (e.g., criteria for well-posed problems); physics scaling (homogenization techniques); Constructal Law criteria in morphing shape and structure of systems with internal flows; computational domain construction (CAD and, or reconstruction techniques based on medical images); numerical modelling issues, and validation techniques used to ascertain numerical simulation results. In addition, new ideas and venues to investigate and understand finer scale models and merge them into continuous media medical physics are provided as case studies. Presents the fundamentals of mathematical and numerical modeling of engineering problems in medicine Discusses many of the most common modelling scenarios for Biomedical Engineering, including, electrical activity of the heart hemodynamic activity monitoring, magnetic drug targeting, bioheat models and thermography, RF and microwave hyperthermia, ablation, EMF dosimetry, and bioimpedance methods Includes discussion of the core approach methodology to pose and solve different problems of medical engineering, including essentials of mathematical modelling, physics scaling, Constructal Law criteria in morphing shape and structure of systems with internal flows, computational domain construction, numerical modelling issues, and validation techniques used to ascertain numerical simulation results
Download or read book Oxide Electronics written by Asim K. Ray and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Electronics Multiple disciplines converge in this insightful exploration of complex metal oxides and their functions and properties Oxide Electronics delivers a broad and comprehensive exploration of complex metal oxides designed to meet the multidisciplinary needs of electrical and electronic engineers, physicists, and material scientists. The distinguished author eschews complex mathematics whenever possible and focuses on the physical and functional properties of metal oxides in each chapter. Each of the sixteen chapters featured within the book begins with an abstract and an introduction to the topic, clear explanations are presented with graphical illustrations and relevant equations throughout the book. Numerous supporting references are included, and each chapter is self-contained, making them perfect for use both as a reference and as study material. Readers will learn how and why the field of oxide electronics is a key area of research and exploitation in materials science, electrical engineering, and semiconductor physics. The book encompasses every application area where the functional and electronic properties of various genres of oxides are exploited. Readers will also learn from topics like: Thorough discussions of High-k gate oxide for silicon heterostructure MOSFET devices and semiconductor-dielectric interfaces An exploration of printable high-mobility transparent amorphous oxide semiconductors Treatments of graphene oxide electronics, magnetic oxides, ferroelectric oxides, and materials for spin electronics Examinations of the calcium aluminate binary compound, perovoksites for photovoltaics, and oxide 2Degs Analyses of various applications for oxide electronics, including data storage, microprocessors, biomedical devices, LCDs, photovoltaic cells, TFTs, and sensors Suitable for researchers in semiconductor technology or working in materials science, electrical engineering, and physics, Oxide Electronics will also earn a place in the libraries of private industry researchers like device engineers working on electronic applications of oxide electronics. Engineers working on photovoltaics, sensors, or consumer electronics will also benefit from this book.
Download or read book Nanobiosensors written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing cutting edge research on the hot topic of nanobiosensor, this book will become highly read Biosensor research has recently re-emerged as most vibrant area in recent years particularly after the advent of novel nanomaterials of multidimensional features and compositions. Nanomaterials of different types and striking properties have played a positive role in giving the boost and accelerated pace to biosensors development technology. Nanobiosensors - From Design to Applications covers several aspects of biosensors beginning from the basic concepts to advanced level research. It will help to bridge the gap between various aspects of biosensors development technology and applications. It covers biosensors related material in broad spectrum such as basic concepts, biosensors & their classification, biomarkers & their role in biosensors, nanostructures-based biosensors, applications of biosensors in human diseases, drug detection, toxins, and smart phone based biosensors. Nanobiosensors - From Design to Applications will prove a source of inspiration for research on biosensors, their local level development and consequently using for practical application in different industries such as food, biomedical diagnosis, pharmaceutics, agriculture, drug discovery, forensics, etc. * Discusses the latest technology and advances in the field of nanobiosensors and their applications in human diseases, drug detection, toxins * Offers a broad and comprehensive view of cutting-edge research on advanced materials such as carbon materials, nitride based nanomaterials, metal and metal oxide based nanomaterials for the fast-developing nanobiosensors research * Goes to a wide scientific and industry audience Nanobiosensors - From Design to Applications is a resource for polymer chemists, spectroscopists, materials scientists, physical chemists, surface chemists, and surface physicists.