Download or read book Imaging Measurement Methods for Flow Analysis written by Wolfgang Nitsche and published by Springer Science & Business Media. This book was released on 2009-04-08 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2003 the German Research Foundation established a new priority programme on the subject of “Imaging Measurement Methods for Flow Analysis” (SPP 1147). This research programme was based on the fact that experimental ?ow analysis, in addition to theory and numerics, has always played a predominant part both in ?ow research and in other areas of industrial practice. At the time, however, c- parisons with numerical tools (such as Computational Fluid Dynamics), which were increasingly used in research and practical applications, soon made it clear that there are relatively few experimental procedures which can keep up with state-of-the-art numerical methods in respect of their informative value, e.g. with regard to visu- spatial analysis or the dynamics of ?ow ?elds. The priority programme “Imaging Measurement Methods for Flow Analysis” was to help close this development gap. Hence the project was to focus on the investigation of ef?cient measurement me- ods to analyse complex spatial ?ow ?elds. Speci?c cooperations with computer sciences and especially measurement physics were to advance ?ow measurement techniques to a widely renowned key technology, exceeding the classical ?elds of ?uid mechanics by a long chalk.
Download or read book High Resolution Imaging in Microscopy and Ophthalmology written by Josef F. Bille and published by Springer. This book was released on 2019-08-13 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a comprehensive overview of the application of the newest laser and microscope/ophthalmoscope technology in the field of high resolution imaging in microscopy and ophthalmology. Starting by describing High-Resolution 3D Light Microscopy with STED and RESOLFT, the book goes on to cover retinal and anterior segment imaging and image-guided treatment and also discusses the development of adaptive optics in vision science and ophthalmology. Using an interdisciplinary approach, the reader will learn about the latest developments and most up to date technology in the field and how these translate to a medical setting. High Resolution Imaging in Microscopy and Ophthalmology – New Frontiers in Biomedical Optics has been written by leading experts in the field and offers insights on engineering, biology, and medicine, thus being a valuable addition for scientists, engineers, and clinicians with technical and medical interest who would like to understand the equipment, the applications and the medical/biological background. Lastly, this book is dedicated to the memory of Dr. Gerhard Zinser, co-founder of Heidelberg Engineering GmbH, a scientist, a husband, a brother, a colleague, and a friend.
Download or read book Imaging Measurement Methods for Flow Analysis written by Wolfgang Nitsche and published by Springer. This book was released on 2009-04-24 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2003 the German Research Foundation established a new priority programme on the subject of “Imaging Measurement Methods for Flow Analysis” (SPP 1147). This research programme was based on the fact that experimental ?ow analysis, in addition to theory and numerics, has always played a predominant part both in ?ow research and in other areas of industrial practice. At the time, however, c- parisons with numerical tools (such as Computational Fluid Dynamics), which were increasingly used in research and practical applications, soon made it clear that there are relatively few experimental procedures which can keep up with state-of-the-art numerical methods in respect of their informative value, e.g. with regard to visu- spatial analysis or the dynamics of ?ow ?elds. The priority programme “Imaging Measurement Methods for Flow Analysis” was to help close this development gap. Hence the project was to focus on the investigation of ef?cient measurement me- ods to analyse complex spatial ?ow ?elds. Speci?c cooperations with computer sciences and especially measurement physics were to advance ?ow measurement techniques to a widely renowned key technology, exceeding the classical ?elds of ?uid mechanics by a long chalk.
Download or read book Topological Methods in Data Analysis and Visualization III written by Peer-Timo Bremer and published by Springer Science & Business. This book was released on 2014-04-22 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of peer-reviewed conference papers provides comprehensive coverage of cutting-edge research in topological approaches to data analysis and visualization. It encompasses the full range of new algorithms and insights, including fast homology computation, comparative analysis of simplification techniques, and key applications in materials and medical science. The volume also features material on core research challenges such as the representation of large and complex datasets and integrating numerical methods with robust combinatorial algorithms. Reflecting the focus of the TopoInVis 2013 conference, the contributions evince the progress currently being made on finding experimental solutions to open problems in the sector. They provide an inclusive snapshot of state-of-the-art research that enables researchers to keep abreast of the latest developments and provides a foundation for future progress. With papers by some of the world’s leading experts in topological techniques, this volume is a major contribution to the literature in a field of growing importance with applications in disciplines that range from engineering to medicine.
Download or read book ADIGMA A European Initiative on the Development of Adaptive Higher Order Variational Methods for Aerospace Applications written by Norbert Kroll and published by Springer Science & Business Media. This book was released on 2010-09-18 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains results gained from the EU-funded 6th Framework project ADIGMA (Adaptive Higher-order Variational Methods for Aerodynamic Applications in Industry). The goal of ADIGMA was the development and utilization of innovative adaptive higher-order methods for the compressible flow equations enabling reliable, mesh independent numerical solutions for large-scale aerodynamic applications in aircraft industry. The ADIGMA consortium was comprised of 22 organizations which included the main European aircraft manufacturers, the major European research establishments and several universities, all with well proven expertise in Computational Fluid Dynamics (CFD). The book presents an introduction to the project, exhibits partners’ methods and approaches and provides a critical assessment of the newly developed methods for industrial aerodynamic applications. The best numerical strategies for integration as major building blocks for the next generation of industrial flow solvers are identified.
Download or read book Progress in Hybrid RANS LES Modelling written by Shia-Hui Peng and published by Springer Science & Business Media. This book was released on 2010-09-17 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid modelling of turbulent flows, combining RANS and LES techniques, has received increasing attention over the past decade to fill the gap between (U)RANS and LES computations in aerodynamic applications at industrially relevant Reynolds numbers. With the advantage of hybrid RANS-LES modelling approaches, being considerably more computationally efficient than full LES and more accurate than (U)RANS, particularly for unsteady aerodynamic flows, has motivated numerous research and development activities. These activities have been increasingly stimulated by the provision of modern computing facilities. The present book contains the contributions presented at the Third Symposium on Hybrid RANS-LES Methods, held in Gdansk, Poland, 10-12 June 2009. To a certain extent, this conference was a continuation of the first symposium taking place in Stockholm (Sweden, 2005) and the second in Corfu (Greece, 2007). Motivated by the extensive interest in the research community, the papers presented at the Corfu symposium were published by Springer in the book entitled “Advances in Hybrid RANS-LES Modelling” (in Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Vol. 97). At the Gdansk symposium, along with four invited keynotes, given respectively by S. Fu, U. Michel, M. Sillen and P. Spalart, another 28 papers were presented on the following topics: Unsteady RANS, LES, Improved DES Methods, Hybrid RANS-LES Methods, DES versus URANS and other Hybrid Methods, Modelli- related Numerical Issues and Industrial Applications. After the symposium all full papers have been further reviewed and revised for publication in the present book.
Download or read book Optics and Spectroscopy for Fluid Characterization written by Johannes Kiefer and published by MDPI. This book was released on 2018-08-20 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Optics and Spectroscopy for Fluid Characterization" that was published in Applied Sciences
Download or read book Nature Inspired Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the closing report of the national priority program Nature-Inspired Fluid Mechanics (Schwerpunktprogramm SPP 1207: Strömungsbeeinflussung in der Natur und Technik). Nature-inspired fluid mechanics is one subset of biomimetics, a discipline which has received increased attention over the last decade, with numerous faculties and degree courses devoted solely to exploring ‘nature as a model’ for engineering applications. To save locomotion energy, evolution has optimized the design of animals such that friction loss is minimized. In addition to many morphological adaptations, animals that are often exposed to water or air currents have developed special behaviors that allow them to use the energy contained in air or water fluctuations for energy savings. Such flow manipulation and control is not only important for many animals, but also for many engineering applications. Since living beings have been optimized by several million years of evolution it is very likely that many engineering disciplines can profit from the study of systems found in nature. Curiously, there has been little serious cross-disciplinary work and information exchange on the topic of fluid dynamics and flow control and this was the initial motivation to establish this national priority program.
Download or read book Computational Science and High Performance Computing IV written by Egon Krause and published by Springer Science & Business Media. This book was released on 2011-01-21 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 27 contributions to the Forth Russian-German Advanced Research Workshop on Computational Science and High Performance Computing presented in October 2009 in Freiburg, Germany. The workshop was organized jointly by the High Performance Computing Center Stuttgart (HLRS), the Institute of Computational Technologies of the Siberian Branch of the Russian Academy of Sciences (ICT SB RAS) and the Section of Applied Mathematics of the University of Freiburg (IAM Freiburg) The contributions range from computer science, mathematics and high performance computing to applications in mechanical and aerospace engineering. They show a wealth of theoretical work and simulation experience with a potential of bringing together theoretical mathematical modelling and usage of high performance computing systems presenting the state of the art of computational technologies.
Download or read book Fundamental Medical and Engineering Investigations on Protective Artificial Respiration written by Michael Klaas and published by Springer Science & Business Media. This book was released on 2011-04-11 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers from the research program “Protective Artificial Respiration (PAR)”. In 2005 the German Research Association DFG launched the research program PAR which is a joint initiative of medicine and fluid mechanics. The main long-term objective of this program is the development of a more protective artificial respiratory system to reduce the physical stress of patients undergoing artificial respiration. To satisfy this goal 11 projects have been defined. In each of these projects scientists from medicine and fluid mechanics do collaborate in several experimental and numerical investigations to improve the fundamental knowledge on respiration and to develop a more individual artificial breathing concept.
Download or read book Noise and Vibration Mitigation for Rail Transportation Systems written by Tatsuo Maeda and published by Springer Science & Business Media. This book was released on 2011-10-30 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the contributions to the 10th International Workshop on Railway Noise, held October 18–22, 2010, in Nagahama, Japan, organized by the Railway Technical Research Institute (RTRI), Japan. With 11 sessions and 3 poster sessions, the workshop featured presentations by international leaders in the field of railway noise and vibration. All subjects relating to 1. prospects, legal regulation, and perception; 2. wheel and rail noise; 3. structure-borne noise and squeal noise; 4. ground-borne vibration; 5. aerodynamic noise and micro-pressure waves from tunnel portals; 6. interior noise and sound barriers; and 7. prediction, measurements, and monitoring are addressed here. This book is a useful “state-of-the-art” reference for scientists and engineers involved in solving environmental problems of railways.
Download or read book Fluid Flow Measurement written by Paul J. LaNasa and published by Butterworth-Heinemann. This book was released on 2014-04-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. - The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications - Avoids theory and focuses on presentation of practical data for the novice and veteran engineer - Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications
Download or read book Parallel Computational Fluid Dynamics 2005 written by A. Deane and published by Elsevier. This book was released on 2006-09-06 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings from Parallel CFD 2005 covering all aspects of the theory and applications of parallel computational fluid dynamics from the traditional to the more contemporary issues.- Report on current research in the field in an area which is rapidly changing- Subject is important to all interested in solving large fluid dynamics problems- Interdisciplinary activity. Contributions include scientists with a variety of backgrounds
Download or read book Imaging Flow Cytometry written by Natasha S. Barteneva and published by Humana. This book was released on 2015-11-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed volume for the first time explores techniques and protocols involving quantitative imaging flow cytometry (IFC), which has revolutionized our ability to analyze cells, cellular clusters, and populations in a remarkable fashion. Beginning with an introduction to technology, the book continues with sections addressing protocols for studies on the cell nucleus, nucleic acids, and FISH techniques using an IFC instrument, immune response analysis and drug screening, IFC protocols for apoptosis and cell death analysis, as well as morphological analysis and the identification of rare cells. Written for the highly successful Methods in Molecular Biology series, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Authoritative and practical, Imaging Flow Cytometry: Methods and Protocols will be a critical source for all laboratories seeking to implement IFC in their research studies.
Download or read book Turbulence and Interactions written by Michel Deville and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains six keynote lectures and 44 contributed papers of the TI 2009 conference that was held in Saint-Luce, La Martinique, May 31-June 5, 2009. These lectures address the latest developments in direct numerical simulations, large eddy simulations, compressible turbulence, coherent structures, droplets, two-phase flows, etc. The present monograph is a snapshot of the state-of-the-art in the field of turbulence with a broad view on theory, experiments and numerical simulations.
Download or read book Unsteady Effects of Shock Wave induced Separation written by Piotr Doerffer and published by Springer Science & Business Media. This book was released on 2010-11-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains description of experimental and numerical results obtained in the UFAST project. The goal of the project was to generate experiment data bank providing unsteady characteristics of the shock boundary layer interaction. The experiments concerned basic-reference cases and the cases with application of flow control devices. Obtained new data bank have been used for the comparison with available simulation techniques, starting from RANS, through URANS, LES and hybrid RANS-LES methods. New understanding of flow physics as well as ability of different numerical methods in the prediction of such unsteady flow phenomena will be discussed.
Download or read book Experimental Aerodynamics written by Stefano Discetti and published by CRC Press. This book was released on 2017-03-16 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Aerodynamics provides an up to date study of this key area of aeronautical engineering. The field has undergone significant evolution with the development of 3D techniques, data processing methods, and the conjugation of simultaneous measurements of multiple quantities. Written for undergraduate and graduate students in Aerospace Engineering, the text features chapters by leading experts, with a consistent structure, level, and pedagogical approach. Fundamentals of measurements and recent research developments are introduced, supported by numerous examples, illustrations, and problems. The text will also be of interest to those studying mechanical systems, such as wind turbines.
