Download or read book Computer Aided Design in Control Systems 1988 written by Zhen-Yu Chen and published by Elsevier. This book was released on 2017-05-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 73 papers, presenting the state of the art in computer-aided design in control systems (CADCS). The latest information and exchange of ideas presented at the Symposium illustrates the development of computer-aided design science and technology within control systems. The Proceedings contain six plenary papers and six special invited papers, and the remainder are divided into five themes: CADCS packages; CADCS software and hardware; systems design methods; CADCS expert systems; CADCS applications, with finally a discussion on CADCS in education and research.

Download or read book Fourth European Symposium on Computer Aided Process Engineering ESCAPE 4 written by F. A. Perris and published by IChemE. This book was released on 1994 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ESCAPE symposia address the applications of computer aids to all aspects of process engineering. The primary objective is the interchange of information on industrial needs, new technology developments and research opportunities. With industrialists and academia contibuting from all over the world, this set of proceedings provides an overview of current international computer-aided process engineering (CAPE). This book is intended for chemical and process engineers, design engineers and computer-aided specialists.

Download or read book Proceedings IEEE Control Systems Society Symposium on Computer Aided Control System Design CACSD written by and published by . This book was released on 2000 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CAD for Control Systems written by Derek A. Linkens and published by CRC Press. This book was released on 2020-08-26 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive collection brings together current information on CAD for control systems including present and future trends in computer-aided design exploring the areas of modeling, simulation, simulation languages, environments, and design techniques. Presenting a systems approach to control d

Download or read book Proceedings of the 26th International Symposium on Advancement of Construction Management and Real Estate written by Hongling Guo and published by Springer Nature. This book was released on 2022-09-01 with total page 1687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of CRIOCM 2021 (26th International Conference on Advancement of Construction Management and Real Estate) presents the latest developments in real estate and construction management around the globe. The conference was organized by the Chinese Research Institute of Construction Management (CRIOCM) working in close collaboration with Tsinghua University. Written by international academics and professionals, the book discusses the latest achievements, research findings and advances in frontier disciplines in the field of construction management and real estate. Covering a wide range of topics, including building information modeling, big data, geographic information systems, housing policies, management of infrastructure projects, intelligent construction and smart city, real estate finance and economics and urban planning and sustainability, the discussions provide valuable insights into the implementation of advanced construction project management and real estate market in China and abroad. The book offers an outstanding resource for academics and professionals.

Download or read book Internet Accessible Remote Laboratories Scalable E Learning Tools for Engineering and Science Disciplines written by Azad, Abul K.M. and published by IGI Global. This book was released on 2011-11-30 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents current developments in the multidisciplinary creation of Internet accessible remote laboratories, offering perspectives on teaching with online laboratories, pedagogical design, system architectures for remote laboratories, future trends, and policy issues in the use of remote laboratories"--Provided by publisher.

Download or read book Towards the Knowledge Society written by João L. Monteiro and published by Springer. This book was released on 2013-04-17 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Towards the Knowledge Society is a state-of-the-art book covering innovative trends in the design, implementation and dissemination of eCommerce, eBusiness, and eGovernment. The book contains recent results of research and development in the areas of: - eGoverment; | - eMarkets; - eLearning; - eBusiness (B2B and B2C); - Trust, Security and Fraud; - Public Services and Health; - Design of I.S., Web and Technology Systems; - Applications and Procedures for eCommerce/eBusiness. Towards the Knowledge Society comprises the proceedings of I3E 2002, the Second International Conference on eCommerce, eBusiness, eGovernment, which was sponsored by the International Federation for Information Processing (IFIP) and held in Lisbon, Portugal in October 2002.

Download or read book Control and Systems Engineering written by Aly El-Osery and published by Springer. This book was released on 2015-03-19 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a tribute to 40 years of contributions by Professor Mo Jamshidi who is a well known and respected scholar, researcher, and educator. Mo Jamshidi has spent his professional career formalizing and extending the field of large-scale complex systems (LSS) engineering resulting in educating numerous graduates specifically, ethnic minorities. He has made significant contributions in modeling, optimization, CAD, control and applications of large-scale systems leading to his current global role in formalizing system of systems engineering (SoSE), as a new field. His books on complex LSS and SoSE have filled a vacuum in cyber-physical systems literature for the 21st Century. His contributions to ethnic minority engineering education commenced with his work at the University of New Mexico (UNM, Tier-I Hispanic Serving Institution) in 1980 through a NASA JPL grant. Followed by several more major federal grants, he formalized a model for educating minorities, called VI-P Pyramid where K-12 students(bottom of pyramid) to doctoral (top of pyramid) students form a seamless group working on one project. Upper level students mentor lower ones on a sequential basis. Since 1980, he has graduated over 114 minority students consisting of 62 Hispanics, 34 African Americans., 15 Native Americans, and 3 Pacific Islanders. This book contains contributed chapters from colleagues, and former and current students of Professor Jamshidi. Areas of focus are: control systems, energy and system of systems, robotics and soft computing.

Download or read book Robotics Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2013-10-31 with total page 1801 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores some of the most recent developments in robotic motion, artificial intelligence, and human-machine interaction, providing insight into a wide variety of applications and functional areas"--Provided by publisher.

Download or read book Developments and Applications in SmartRail Traffic and Transportation Engineering written by Limin Jia and published by Springer Nature. This book was released on with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fractional order Systems and Controls written by Concepción A. Monje and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractional-order Systems and Controls details the use of fractional calculus in the description and modeling of systems, and in a range of control design and practical applications. It is largely self-contained, covering the fundamentals of fractional calculus together with some analytical and numerical techniques and providing MATLAB® codes for the simulation of fractional-order control (FOC) systems. Many different FOC schemes are presented for control and dynamic systems problems. Practical material relating to a wide variety of applications is also provided. All the control schemes and applications are presented in the monograph with either system simulation results or real experimental results, or both. Fractional-order Systems and Controls provides readers with a basic understanding of FOC concepts and methods, so they can extend their use of FOC in other industrial system applications, thereby expanding their range of disciplines by exploiting this versatile new set of control techniques.

Download or read book Computational Science and Its Applications ICCSA 2018 written by Osvaldo Gervasi and published by Springer. This book was released on 2018-07-03 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five volume set LNCS 10960 until 10964 constitutes the refereed proceedings of the 18th International Conference on Computational Science and Its Applications, ICCSA 2018, held in Melbourne, Australia, in July 2018. Apart from the general tracks, ICCSA 2018 also includes 34 international workshops in various areas of computational sciences, ranging from computational science technologies, to specific areas of computational sciences, such as computer graphics and virtual reality. The total of 265 full papers and 10 short papers presented in the 5-volume proceedings set of ICCSA 2018, were carefully reviewed and selected from 892 submissions.

Download or read book Nonlinear Approaches in Engineering Applications written by Reza N. Jazar and published by Springer. This book was released on 2019-08-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the latest applications of nonlinear approaches in engineering and addresses a range of scientific problems. Examples focus on issues in automotive technology, including automotive dynamics, control for electric and hybrid vehicles, and autodriver algorithm for autonomous vehicles. Also included are discussions on renewable energy plants, data modeling, driver-aid methods, and low-frequency vibration. Chapters are based on invited contributions from world-class experts who advance the future of engineering by discussing the development of more optimal, accurate, efficient, cost, and energy effective systems. This book is appropriate for researchers, students, and practising engineers who are interested in the applications of nonlinear approaches to solving engineering and science problems. Presents a broad range of practical topics and approaches; Explains approaches to better, safer, and cheaper systems; Emphasises automotive applications, physical meaning, and methodologies.

Download or read book Modeling and Control of Discrete event Dynamic Systems written by Branislav Hrúz and published by Springer Science & Business Media. This book was released on 2007-08-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete-event dynamic systems (DEDs) permeate our world. They are of great importance in modern manufacturing processes, transportation and various forms of computer and communications networking. This book begins with the mathematical basics required for the study of DEDs and moves on to present various tools used in their modeling and control. Industrial examples illustrate the concepts and methods discussed, making this book an invaluable aid for students embarking on further courses in control, manufacturing engineering or computer studies.

Download or read book Introduction to Modeling and Simulation of Technical and Physical Systems with Modelica written by Peter Fritzson and published by John Wiley & Sons. This book was released on 2011-10-03 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master modeling and simulation using Modelica, the new powerful, highly versatile object-based modeling language Modelica, the new object-based software/hardware modeling language that is quickly gaining popularity around the world, offers an almost universal approach to high-level computational modeling and simulation. It handles a broad range of application domains, for example mechanics, electrical systems, control, and thermodynamics, and facilitates general notation as well as powerful abstractions and efficient implementations. Using the versatile Modelica language and its associated technology, this text presents an object-oriented, component-based approach that makes it possible for readers to quickly master the basics of computer-supported equation-based object-oriented (EOO) mathematical modeling and simulation. Throughout the text, Modelica is used to illustrate the various aspects of modeling and simulation. At the same time, a number of key concepts underlying the Modelica language are explained with the use of modeling and simulation examples. This book: Examines basic concepts such as systems, models, and simulations Guides readers through the Modelica language with the aid of several step-by-step examples Introduces the Modelica class concept and its use in graphical and textual modeling Explores modeling methodology for continuous, discrete, and hybrid systems Presents an overview of the Modelica Standard Library and key Modelica model libraries Readers will find plenty of examples of models that simulate distinct application domains as well as examples that combine several domains. All the examples and exercises in the text are available via DrModelica. This electronic self-teaching program, freely available on the text's companion website, guides readers from simple, introductory examples and exercises to more advanced ones. Written by the Director of the Open Source Modelica Consortium, Introduction to Modeling and Simulation of Technical and Physical Systems with Modelica is recommended for engineers and students interested in computer-aided design, modeling, simulation, and analysis of technical and natural systems. By building on basic concepts, the text is ideal for students who want to learn modeling, simulation, and object orientation.

Download or read book Fractional Order Motion Controls written by and published by John Wiley & Sons. This book was released on 2012-11-07 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering fractional order theory, simulation and experiments, this book explains how fractional order modelling and fractional order controller design compares favourably with traditional velocity and position control systems. The authors systematically compare the two approaches using applied fractional calculus. Stability theory in fractional order controllers design is also analysed. Presents material suitable for a variety of real-world applications, including hard disk drives, vehicular controls, robot control and micropositioners in DNA microarray analysis Includes extensive experimental results from both lab bench level tests and industrial level, mass-production-ready implementations Covers detailed derivations and numerical simulations for each case Discusses feasible design specifications, ideal for practicing engineers The book also covers key topics including: fractional order disturbance cancellation and adaptive learning control studies for external disturbances; optimization approaches for nonlinear system control and design schemes with backlash and friction. Illustrations and experimental validations are included for each of the proposed control schemes to enable readers to develop a clear understanding of the approaches covered, and move on to apply them in real-world scenarios.

Download or read book Modeling and Simulation with Simulink written by Dingyü Xue and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential, intermediate and advanced topics of Simulink are covered in the book. The concept of multi-domain physical modeling concept and tools in Simulink are illustrated with examples for engineering systems and multimedia information. The combination of Simulink and numerical optimization methods provides new approaches for solving problems, where solutions are not known otherwise.