Download or read book IEEE Standard for Communication based Train Control CBTC Performance and Functional Requirements written by and published by IEEE Standards Office. This book was released on 1999 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance and functional requirements for a communications-based train control (CBTC) system are established in this standard. A CBTC system is a continuous, automatic train control system utilizing high-resolution train location determination, independent of track circuits; continuous, high-capacity, bidirectional train-to-wayside data communications; and trainborne and wayside processors capable of implementing automatic train protection (ATP) functions, as well as optional automatic train operation (ATO) and automatic train supervision (ATS) functions ...

Download or read book IEEE Standard for Communications based Train Control CBTC Performance and Functional Requirements written by Vehicular Technology Society. Rail Transit Vehicle Interface Standards Committee and published by . This book was released on 2005 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 1999 IEEE Standard for Communication Based Train Control Performance Requirements and Functional Requirements written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance and functional requirements for a communications-based train control (CBTC) system are established in this standard. A CBTC system is a continuous, automatic train control system utilizing high-resolution train location determination, independent of track circuits; continuous, high-capacity, bidirectional train-to-wayside data communications; and trainborne and wayside processors capable of implementing automatic train protection (ATP) functions, as well as optional automatic train operation (ATO) and automatic train supervision (ATS) functions.

Download or read book Standards for Communication Based Train Control Performance Requirements and Functional Requirements written by IEEE and published by IEEE Standards Office. This book was released on 2000-11-01 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance and functional requirements for a communications-based train control (CBTC) system are established in this standard. A CBTC system is a continuous, automatic train control system utilizing high-resolution train location determination, independent of track circuits; continuous, high-capacity, bidirectional train-to-wayside data communications; and trainborne and wayside processors capable of implementing automatic train protection (ATP) functions, as well as optional automatic train operation (ATO) and automatic train supervision (ATS) functions ...

Download or read book Advances in Communications Based Train Control Systems written by F. Richard Yu and published by CRC Press. This book was released on 2015-11-05 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: With rapid population explosion, improving rail transit speed and capacity is strongly desirable around the world. Communication-based train control (CBTC) is an automated train control system using high capacity bidirectional train-ground communications to ensure the safe operation of rail vehicles. This book presents the latest advances in CBTC r

Download or read book IEEE Recommended Practice for Communications based Train Control CBTC System Design and Functional Allocations written by and published by . This book was released on 2008 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This recommended practice for communications-based train control (CBTC) system design and functional allocations builds on IEEE Std 1474.1 by decomposing each identified automatic train protection, automatic train operation and automatic train supervision function to a level where each subfunction can be allocated to one of the CBTC subsystems.

Download or read book Communication Technologies for Vehicles written by Alain Pirovano and published by Springer. This book was released on 2017-04-28 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 12th International Workshop on Communication Technologies for Vehicles, Nets4Cars/Nets4Trains/Nets4Aircraft 2017, held in Toulouse, France, in May 2017. The 12 full papers presented together with 2 demo papers in this volumewere carefully reviewed and selected from 16 submissions. The volume features contributions in the theory or practice of intelligent transportation systems (ITS) and communication technologies for: Vehicles on road: e.g. cars, tracks and buses; Air: e.g. aircraft and unmanned aerial vehicles; and Rail: e.g. trains, metros and trams.

Download or read book 2021 6th International Conference on Intelligent Transportation Engineering ICITE 2021 written by Zhenyuan Zhang and published by Springer Nature. This book was released on 2022-05-31 with total page 1238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features high-quality, peer-reviewed papers from the 2021 6th International Conference on Intelligent Transportation Engineering (ICITE 2021), held in Beijing, China, on October 29–31, 2021. Presenting the latest developments and technical solutions in Intelligent Transportation engineering, it covers a variety of topics, such as intelligent transportation, traffic control, road networking, intelligent automobile and vehicle operation & management. The book will be a valuable reference for graduate and postgraduate audiences, researchers and engineers, working in Intelligent Transportation Engineering.

Download or read book Computers in Railways XVII written by G. Passerini and published by WIT Press. This book was released on 2020-09-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is important to continue to update the use of advanced systems by promoting general awareness throughout the management, design, manufacture and operation of railways and other emerging passenger, freight and transit systems. Originating from presentations at the 17th International Conference on Railway Engineering Design and Operation, this volume contains selected research works on the topic. The included papers help to facilitate the use of advanced systems and place a key focus on the applications of computer systems in advanced railway engineering. These research studies will be of interest to all those involved in the development of railways, including managers, consultants, railway engineers, designers of advanced train control systems and computer specialists.

Download or read book Principles and Techniques of Electromagnetic Compatibility written by Christos Christopoulos and published by CRC Press. This book was released on 2022-07-14 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a sound grasp of the fundamental concepts, applications, and practice of EMC. Developments in recent years have resulted in further increases in electrical component density, wider penetration of wireless technologies, and a significant increase in complexity of electrical and electronic equipment. New materials, which can be customized to meet EMC needs, have been introduced. Considerable progress has been made in developing numerical tools for complete system EMC simulation. EMC is now a central consideration in all industrial sectors. Maintaining the holistic approach of the previous edition of Principles and Techniques of Electromagnetic Compatibility, the Third Edition updates coverage of EMC to reflects recent important developments. What is new in the Third Edition? A comprehensive treatment of new materials (meta- and nano-) and their impact on EMC Numerical modelling of complex systems and complexity reduction methods Impact of wireless technologies and the Internet of Things (IoT) on EMC Testing in reverberation chambers, and in the time-domain A comprehensive treatment of the scope and development of stochastic models for EMC EMC issues encountered in automotive, railway, aerospace, and marine applications Impact of EMC and Intentional EMI (IEMI) on infrastructure, and risk assessment In addition to updating material, new references, examples, and appendices were added to offer further support to readers interested in exploring further. As in previous editions, the emphasis is on building a sound theoretical framework, and demonstrating how it can be turned to practical use in challenging applications. The expectation is that this approach will serve EMC engineers through the inevitable future technological shifts and developments.

Download or read book Dedicated Mobile Communications for High speed Railway written by Zhang-Dui Zhong and published by Springer. This book was released on 2017-08-14 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the fundamental theory and key technologies of narrowband and broadband mobile communication systems specifically for railways. It describes novel relaying schemes that meet the different design criteria for railways and discusses the applications of signal classification techniques as well as offline resource scheduling as a way of advancing rail practice. Further, it introduces Novel Long Term Evolution for Railway (LTE-R) network architecture, the Quality of Service (QoS) requirement of LTE-R and its performance evaluation and discusses in detail security technologies for rail-dedicated mobile communication systems. The advanced research findings presented in the book are all based on high-speed railway measurement data, which offer insights into the propagation mechanisms and corresponding modeling theory and approaches in unique railway scenarios.It is a valuable resource for researchers, engineers and graduate students in the fields of rail traffic systems, telecommunication and information systems.

Download or read book Reliability Safety and Security of Railway Systems Modelling Analysis Verification and Certification written by Birgit Milius and published by Springer Nature. This book was released on 2023-09-26 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 5th International Conference on Reliability, Safety, and Security of Railway Systems. Modelling, Analysis, Verification, and Certification, RSSRail 2023, held in Berlin, Germany, during October 10–12, 2023. The 13 full papers presented in this book together with 3 keynotes were carefully reviewed and selected from 25 submissions. The papers are divided into the following topical sections: modeling for security; tooled approaches and dependability of highly automated transport systems; formal methods for safety assessment; and formal model and visual tooling.

Download or read book Computers in Railways 12 written by Bin Ning and published by WIT Press. This book was released on 2010 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: These conference proceedings update the use of computer-based techniques, promoting their general awareness throughout the business management, design, manufacture and operation of railways and other advanced passenger, freight and transport systems.

Download or read book Proceedings of the 4th International Conference on Electrical and Information Technologies for Rail Transportation EITRT 2019 written by Baoming Liu and published by Springer Nature. This book was released on 2020-04-01 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the latest research trends, methods and experimental results in the field of electrical and information technologies for rail transportation, which covers abundant state-of-the-art research theories and ideas. As a vital field of research that is highly relevant to current developments in a number of technological domains, the subjects it covered include intelligent computing, information processing, Communication Technology, Automatic Control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academicians as well as industrial professionals to present the most innovative research and development in the field of rail transportation electrical and information technologies. Engineers and researchers in academia, industry, and the government will also explore an insight view of the solutions that combine ideas from multiple disciplines in this field. The volumes serve as an excellent reference work for researchers and graduate students working on rail transportation, electrical and information technologies.

Download or read book Safety and Reliability Theory and Applications written by Marko Cepin and published by CRC Press. This book was released on 2017-06-14 with total page 6847 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Theory and Applications contains the contributions presented at the 27th European Safety and Reliability Conference (ESREL 2017, Portorož, Slovenia, June 18-22, 2017). The book covers a wide range of topics, including: • Accident and Incident modelling • Economic Analysis in Risk Management • Foundational Issues in Risk Assessment and Management • Human Factors and Human Reliability • Maintenance Modeling and Applications • Mathematical Methods in Reliability and Safety • Prognostics and System Health Management • Resilience Engineering • Risk Assessment • Risk Management • Simulation for Safety and Reliability Analysis • Structural Reliability • System Reliability, and • Uncertainty Analysis. Selected special sessions include contributions on: the Marie Skłodowska-Curie innovative training network in structural safety; risk approaches in insurance and fi nance sectors; dynamic reliability and probabilistic safety assessment; Bayesian and statistical methods, reliability data and testing; oganizational factors and safety culture; software reliability and safety; probabilistic methods applied to power systems; socio-technical-economic systems; advanced safety assessment methodologies: extended Probabilistic Safety Assessment; reliability; availability; maintainability and safety in railways: theory & practice; big data risk analysis and management, and model-based reliability and safety engineering. Safety and Reliability – Theory and Applications will be of interest to professionals and academics working in a wide range of industrial and governmental sectors including: Aeronautics and Aerospace, Automotive Engineering, Civil Engineering, Electrical and Electronic Engineering, Energy Production and Distribution, Environmental Engineering, Information Technology and Telecommunications, Critical Infrastructures, Insurance and Finance, Manufacturing, Marine Industry, Mechanical Engineering, Natural Hazards, Nuclear Engineering, Offshore Oil and Gas, Security and Protection, Transportation, and Policy Making.

Download or read book Computer Science Technology And Application Proceedings Of The 2016 International Conference Csta 2016 written by Xing Zhang and published by World Scientific. This book was released on 2016-10-07 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2016 International Conference on Computer Science, Technology and Application (CSTA2016) were held in Changsha, China on March 18-20, 2016. The main objective of the joint conference is to provide a platform for researchers, academics and industrial professionals to present their research findings in the fields of computer science and technology.The CSTA2016 received more than 150 submissions, but only 67 articles were selected to be included in this proceedings, which are organized into 6 chapters; covering Image and Signal Processing, Computer Network, Algorithm and Simulation, Data Mining and Cloud Computing, Computer Systems and Application, Mathematics and Management.

Download or read book Vehicular Networking written by Marc Emmelmann and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last 15 years, the interest in vehicular communication has grown, especially in the automotive industry. Due to the envisioned mass market, projects focusing on Car-to-X communication experience high public visibility. This book presents vehicular communication in a broader perspective that includes more than just its application to the automotive industry. It provides, researchers, engineers, decision makers and graduate students in wireless communications with an introduction to vehicular communication focussing on car-to-x and train-based systems. Emphasizes important perspectives of vehicular communication including market area, application areas, and standardization issues as well as selected topics featuring aspects of developing, prototyping, and testing vehicular communication systems. Supports the reader in understanding common characteristics and differences between the various application areas of vehicular communication. Offers both an overview of the application area and an in-depth discussion of key technologies in these areas. Written by a wide range of experts in the field.