Download or read book Electrical Power Equipment Maintenance and Testing written by Paul Gill and published by CRC Press. This book was released on 2016-12-19 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this definitive text covers all aspects of testing and maintenance of the equipment found in electrical power systems serving industrial, commercial, utility substations, and generating plants. It addresses practical aspects of routing testing and maintenance and presents both the methodologies and engineering basics needed to carry out these tasks. It is an essential reference for engineers and technicians responsible for the operation, maintenance, and testing of power system equipment. Comprehensive coverage includes dielectric theory, dissolved gas analysis, cable fault locating, ground resistance measurements, and power factor, dissipation factor, DC, breaker, and relay testing methods.
Download or read book Electric Distribution Systems written by Abdelhay A. Sallam and published by John Wiley & Sons. This book was released on 2011-04-18 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of electric distribution systems. Few books cover specific topics in more depth and there is hardly any book that deals with the key topics of interest to distribution system engineers. The book introduces these topics from two points of view: 1) The practical point of view by providing practical examples and the problems which can be solved. 2) The academic point of view where the analysis and various techniques used for distribution system planning are explained. The most outstanding feature of this book is a combination of practical and academic explanation of its contents. Another outstanding feature is a collection of the traditional and current topics of distribution systems condensed into one book. The reader will gain an understanding of distribution systems from both practical and academic aspects, will be able to outline and design a distribution system for specific loads, cities, zones, etc.. Readers will also be able to recognize the problems which may occur during the operation of distribution systems and be able to propose solutions for these problems.
Download or read book IEEE Recommended Practice for Applying Low voltage Circuit Breakers Used in Industrial and Commercial Power Systems written by IEEE Standards Board and published by Inst of Elect & Electronic. This book was released on 1997-01-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, trip functions, accessories, acceptance tests, and maintenance requirements. It also discusses circuit breakers for special applications, e.g., instantaneous only and switches. In addition, it provides information for applying circuit breakers at different locations in the power system, and for protecting specific components. Guidelines are also given for coordinating combinations of line-side and load-side devices.
Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
Download or read book High Voltage Circuit Breakers written by Ruben D. Garzon and published by CRC Press. This book was released on 2002-06-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated reference presents sensible approaches to the design, selection, and usage of high-voltage circuit breakers-highlighting compliance issues concerning new and aging equipment to the evolving standards set forth by the American National Standards Institute and the International Electrotechnical Commission. This edition features the latest advances in mechanical and dielectric design and application from a simplified qualitative perspective. High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.
Download or read book National Electrical Code written by National Fire Protection Association and published by NationalFireProtectionAssoc. This book was released on 2007 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the latest electrical regulation code that is applicable for electrical wiring and equipment installation for all buildings, covering emergency situations, owner liability, and procedures for ensuring public and workplace safety.
Download or read book IEEE Recommended Practice for Calculating Short Circuit Currents in Industrial and Commercial Power Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 2006-01-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This recommended practice provides short-circuit current information including calculated short-circuit current duties for the application in industrial plants and commercial buildings, at all power system voltages, of power system equipment that senses, carries, or interrupts short-circuit currents.
Download or read book IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.
Download or read book Electrical Safety Code Manual written by Kimberley Keller and published by Butterworth-Heinemann. This book was released on 2010-07-19 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in any workplace is extremely important. In the case of the electrical industry, safety is critical and the codes and regulations which determine safe practices are both diverse and complicated. Employers, electricians, electrical system designers, inspectors, engineers and architects must comply with safety standards listed in the National Electrical Code, OSHA and NFPA 70E. Unfortunately, the publications which list these safety requirements are written in very technically advanced terms and the average person has an extremely difficult time understanding exactly what they need to do to ensure safe installations and working environments. Electrical Safety Code Manual will tie together the various regulations and practices for electrical safety and translate these complicated standards into easy to understand terms. This will result in a publication that is a practical, if not essential, asset to not only designers and company owners but to the electricians who must put compliance requirements into action in the field. - Best-practice methods for accident prevention and electrical hazard avoidance - Current safety regulations, including new standards from OSHA, NEC, NESC, and NFPA - Information on low-, medium-, and high-voltage safety systems - Step-by-step guidelines on safety audits - Training program how-to's, from setup to rescue and first aid procedures
Download or read book Electrical Safety in the Workplace written by Ray A. Jones and published by Jones & Bartlett Learning. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: NFPA's far-reaching Electrical Safety in the Workplace teaches individuals safe work procedures and provides companies with a process for defining and implementing effective electrical safety programs. The text draws on the authors' 35 years of experience in developing corporate standards and procedures and electrical safety programs, and is up-to-date with the 1999 NEC(R) and NFPA 70E: Electrical Safety Requirements for Employee Workplaces. Chapters cover critical information about electrical hazards and hazard analysis, explain risk exposure management, and discuss NFPA codes and documents published by OSHA, NEMA, UL, and ANSI. Concepts applicable to both commercial and industrial activities include: persuasive statistics on the benefits of electrically safe workplaces, plus proper practices such as lockout/tagout and responsibility of personnel; advice on designing and implementing electrical safety programs; real-life examples and case studies of electrical accidents; and tips on working with safety professionals and effective workplace auditing procedures.Electrical Safety in the Workplace is a must for professionals involved in construction and heavy industry, electrical contractors, and union and trade group trainers.
Download or read book National Electrical Code 2011 Handbook written by National Fire Protection Association and published by Cengage Learning. This book was released on 2010-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "National Electrical Code 2011 Handbook" provides the full text of the updated code regulations alongside expert commentary from code specialists, offering code rationale, clarifications for new and updated rules, and practical, real-world advice on how to apply the code.
Download or read book Electrical Safety Handbook 3E written by John Cadick and published by McGraw Hill Professional. This book was released on 2005-10-19 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an accident-avoiding prescription for electricians, safety managers, and inspectors, and engineers dealing with electricity any voltage level. Presenting crucial protective safety strategies for industrial and commercial systems, the Handbook references all major safety codes (OSHA, NEC, NESC, and NFPA) where appropriate, creating a unique, one-stop compliance manual for any company’s electrical safety training and reference needs.
Download or read book Cam Design Handbook written by Harold A. Rothbart and published by McGraw-Hill Professional Publishing. This book was released on 2004 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed with hundreds of detailed illustrations! THE DEFINITIVE GUIDE TO CAM TECHNOLOGY! The transformation of a simple motion, such as rotation, into linear or other motion is accomplished by means of a cam -- two moving elements mounted on a fixed frame. Cam devices are versatile -- almost any specified motion can be obtained. If you work with industrial applications where precision is essential, the "Cam Design Handbook" is a key resource you'll need handy at all times. You'll find thorough, detailed coverage of cams in industrial machinery, automotive optimization, and gadgets and inventions. Written with tremendous practical insight by engineering experts, the "Cam Design Handbook" gathers the information you need to understand cam manufacture and design. Comprehensive in scope and authoritative in nature, the book delivers a firm grasp of: * The advantages of cams compared to other motion devices * Computer-aided design and manufacturing techniques * Numerical controls for manufacturing * Cam size and profile determination * Dynamics of high-speed systems Get comprehensive coverage of: * Basic curves * Profile geometry * Stresses and accuracy * Camwear life predictions * Cam system dynamics * And more!
Download or read book Interior Electrical Systems written by Department of Department of Defense and published by Createspace Independent Publishing Platform. This book was released on 2015-10-06 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This UFC 3-520-01 provides design guidance for interior electrical systems. The document has been extensively revised to update the criteria for interior electrical systems. This UFC has also been coordinated with new UFC 3-501-01, Electrical Engineering. UFC 3-501-01 provides overall electrical engineering criteria, including electrical design analysis and documentation criteria. This type of material has been removed from UFC 3-520-01 so that duplication of criteria is eliminated. Why buy a book you can download for free? First you gotta find it and make sure it's the latest version (not always easy). Then you gotta print it using a network printer you share with 100 other people - and its outta paper - and the toner is low (take out the toner cartridge, shake it, then put it back). If it's just 10 pages, no problem, but if it's a 250-page book, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. An engineer that's paid $75 an hour has to do this himself (who has assistant's anymore?). If you are paid more than $10 an hour and use an ink jet printer, buying this book will save you money. It's much more cost-effective to just order the latest version from Amazon.com This book is published by 4th Watch Books and includes copyright material. We publish compact, tightly-bound, full-size books (8 1⁄2 by 11 inches), with glossy covers. 4th Watch Books is a Service Disabled Veteran-Owned Small Business (SDVOSB). For more titles published by 4th Watch Books, please visit: cybah.webplus.net UFC 2-100-01 Installation Master Planning UFC 4-010-06 Cybersecurity of Facility-Related Control Systems UFC 4-021-02 Electronic Security Systems by Department of Defense FC 4-141-05N Navy and Marine Corps Industrial Control Systems Monitoring Stations UFC 4-010-01 DoD Minimum Antiterrorism Standards for Buildings UFC 4-020-01 DoD Security Engineering Facilities Planning Manual UFC 3-501-01 Electrical Engineering UFC 3-550-07 Operation and Maintenance (O&M) Exterior Power Distribution Systems UFC 3-550-01 Exterior Electrical Power Distribution UFC 3-560-01 Electrical Safety, O & M UFC 3-201-02 Landscape Architecture UFC 3-540-08 Utility-Scale Renewable Energy Systems UFC 3-440-01 Facility-Scale Renewable Energy Systems
Download or read book IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1987-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IEEE Orange Book presents the recommended engineering practices for the selection and application of emergency and standby power systems. It provides commercial facility designers, operators and owners with guidelines for assuring uninterrupted power.
Download or read book IEEE Guide for Maintenance Operation and Safety of Industrial and Commercial Power Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1998 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for the numerous personnel who are responsible for safety operating and maintaining industrial and commercial electric power facilities are provided. This guide provides plant engineers with a reference source for the fundamentals of safe and reliable maintenance and operation of industrial and commercial electric power distribution systems.
