Download or read book IEEE Recommended Practice for Powering and Grounding Electronic Equipment written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Recommended Practice for Software Requirements Specifications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content and qualities of a good software requirements specification (SRS) are described and several sample SRS outlines are presented. This recommended practice is aimed at specifying requirements of software to be developed but also can be applied to assist in the selection of in-house and commercial software products. Guidelines for compliance with IEEE/EIA 1207.1-1997 are also provided.
Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
Download or read book IEEE Recommended Practice for Applying Low voltage Circuit Breakers Used in Industrial and Commercial Power Systems written by IEEE Standards Board and published by Inst of Elect & Electronic. This book was released on 1997-01-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information is provided for selecting the proper circuit breaker for a particular application. This recommended practice helps the application engineer specify the type of circuit breaker, ratings, trip functions, accessories, acceptance tests, and maintenance requirements. It also discusses circuit breakers for special applications, e.g., instantaneous only and switches. In addition, it provides information for applying circuit breakers at different locations in the power system, and for protecting specific components. Guidelines are also given for coordinating combinations of line-side and load-side devices.
Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.
Download or read book Introduction to Computer Networks and Cybersecurity written by Chwan-Hwa (John) Wu and published by CRC Press. This book was released on 2016-04-19 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: If a network is not secure, how valuable is it? Introduction to Computer Networks and Cybersecurity takes an integrated approach to networking and cybersecurity, highlighting the interconnections so that you quickly understand the complex design issues in modern networks. This full-color book uses a wealth of examples and illustrations to effective
Download or read book IEEE Recommended Practice for Monitoring Electric Power Quality written by and published by . This book was released on 2009 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: This recommended practice encompasses the monitoring of electrical characteristics of single-phase and polyphase ac power systems. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems. This recommended practice describes nominal conditions and deviations from these nominal conditions that may originate within the source of supply or load equipment or may originate from interactions between the source and the load. Also, this recommended practice discusses power quality monitoring devices, application techniques, and the interpretation of monitoring results. Keywords: assessment, compatibility, dip, distortion, electromagnetic phenomena, harmonics, imbalance, instruments, monitoring, power quality, rms variation, sag, swell, transient, unbalance.
Download or read book Requirements Engineering and Management for Software Development Projects written by Murali Chemuturi and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Requirements Engineering and Management for Software Development Projects presents a complete guide on requirements for software development including engineering, computer science and management activities. It is the first book to cover all aspects of requirements management in software development projects. This book introduces the understanding of the requirements, elicitation and gathering, requirements analysis, verification and validation of the requirements, establishment of requirements, different methodologies in brief, requirements traceability and change management among other topics. The best practices, pitfalls, and metrics used for efficient software requirements management are also covered. Intended for the professional market, including software engineers, programmers, designers and researchers, this book is also suitable for advanced-level students in computer science or engineering courses as a textbook or reference.
Download or read book IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to the Software Engineering Body of Knowledge Swebok r written by IEEE Computer Society and published by . This book was released on 2014 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the Guide to the Software Engineering Body of Knowledge (SWEBOK(R) Guide), the IEEE Computer Society establishes a baseline for the body of knowledge for the field of software engineering, and the work supports the Society's responsibility to promote the advancement of both theory and practice in this field. It should be noted that the Guide does not purport to define the body of knowledge but rather to serve as a compendium and guide to the knowledge that has been developing and evolving over the past four decades. Now in Version 3.0, the Guide's 15 knowledge areas summarize generally accepted topics and list references for detailed information. The editors for Version 3.0 of the SWEBOK(R) Guide are Pierre Bourque (Ecole de technologie superieure (ETS), Universite du Quebec) and Richard E. (Dick) Fairley (Software and Systems Engineering Associates (S2EA)).
Download or read book Body Sensor Networks written by Guang-Zhong Yang and published by Springer. This book was released on 2014-04-16 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has witnessed a rapid surge of interest in new sensing and monitoring devices for wellbeing and healthcare. One key development in this area is wireless, wearable and implantable in vivo monitoring and intervention. A myriad of platforms are now available from both academic institutions and commercial organisations. They permit the management of patients with both acute and chronic symptoms, including diabetes, cardiovascular diseases, treatment of epilepsy and other debilitating neurological disorders. Despite extensive developments in sensing technologies, there are significant research issues related to system integration, sensor miniaturisation, low-power sensor interface, wireless telemetry and signal processing. In the 2nd edition of this popular and authoritative reference on Body Sensor Networks (BSN), major topics related to the latest technological developments and potential clinical applications are discussed, with contents covering. Biosensor Design, Interfacing and Nanotechnology Wireless Communication and Network Topologies Communication Protocols and Standards Energy Harvesting and Power Delivery Ultra-low Power Bio-inspired Processing Multi-sensor Fusion and Context Aware Sensing Autonomic Sensing Wearable, Ingestible Sensor Integration and Exemplar Applications System Integration and Wireless Sensor Microsystems The book also provides a comprehensive review of the current wireless sensor development platforms and a step-by-step guide to developing your own BSN applications through the use of the BSN development kit.
Download or read book IEEE Recommended Practice for Excitation System Models for Power System Stability Studies written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1992 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding ICT Standardization written by Nizar Abdelkafi and published by . This book was released on 2019-05-23 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: To advance education about ICT standardization, comprehensive and up-to-date teaching materials must be available. With the support of the European Commission, ETSI has developed this textbook to facilitate education on ICT standardization, and to raise the knowledge level of ICT standardization-related topics among lecturers and students in higher education, in particular in the fields of engineering, business administration and law. Readers of this book are not required to have any previous knowledge about standardization. They are introduced firstly to the key concepts of standards and standardization, different elements of the ecosystem and how they interact, as well as the procedures required for the production of standardization documents. Then, readers are taken to the next level by addressing aspects related to standardization such as innovation, strategy, business, and economics. This textbook is an attempt to make ICT standardization accessible and understandable to students. It covers the essentials that are required to get a good overview of the field. The book is organized in chapters that are self-contained, although it would be advantageous to read the book from cover to cover. Each chapter begins with a list of learning objectives and key messages. The text is enriched with examples and case studies from real standardization practice to illustrate the key theoretical concepts. Each chapter also includes a quiz to be used as a self-assessment learning activity. Furthermore, each book chapter includes a glossary and lists of abbreviations and references. Alongside the textbook, we have produced a set of slides that are intended to serve as complementary teaching materials in face-to-face teaching sessions. For all interested parties there is also an electronic version of the textbook as well as the accompanying slides that can be downloaded for free from the ETSI website (www.etsi.org/standardization-education).
Download or read book Cyber Assurance for the Internet of Things written by Tyson T. Brooks and published by John Wiley & Sons. This book was released on 2017-01-04 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an Cyber-Assurance approach to the Internet of Things (IoT) This book discusses the cyber-assurance needs of the IoT environment, highlighting key information assurance (IA) IoT issues and identifying the associated security implications. Through contributions from cyber-assurance, IA, information security and IoT industry practitioners and experts, the text covers fundamental and advanced concepts necessary to grasp current IA issues, challenges, and solutions for the IoT. The future trends in IoT infrastructures, architectures and applications are also examined. Other topics discussed include the IA protection of IoT systems and information being stored, processed or transmitted from unauthorized access or modification of machine-2-machine (M2M) devices, radio-frequency identification (RFID) networks, wireless sensor networks, smart grids, and supervisory control and data acquisition (SCADA) systems. The book also discusses IA measures necessary to detect, protect, and defend IoT information and networks/systems to ensure their availability, integrity, authentication, confidentially, and non-repudiation. Discusses current research and emerging trends in IA theory, applications, architecture and information security in the IoT based on theoretical aspects and studies of practical applications Aids readers in understanding how to design and build cyber-assurance into the IoT Exposes engineers and designers to new strategies and emerging standards, and promotes active development of cyber-assurance Covers challenging issues as well as potential solutions, encouraging discussion and debate amongst those in the field Cyber-Assurance for the Internet of Things is written for researchers and professionals working in the field of wireless technologies, information security architecture, and security system design. This book will also serve as a reference for professors and students involved in IA and IoT networking. Tyson T. Brooks is an Adjunct Professor in the School of Information Studies at Syracuse University; he also works with the Center for Information and Systems Assurance and Trust (CISAT) at Syracuse University, and is an information security technologist and science-practitioner. Dr. Brooks is the founder/Editor-in-Chief of the International Journal of Internet of Things and Cyber-Assurance, an associate editor for the Journal of Enterprise Architecture, the International Journal of Cloud Computing and Services Science, and the International Journal of Information and Network Security.
Download or read book The Industrial Information Technology Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-03 with total page 1938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Information Technology Handbook focuses on existing and emerging industrial applications of IT, and on evolving trends that are driven by the needs of companies and by industry-led consortia and organizations. Emphasizing fast growing areas that have major impacts on industrial automation and enterprise integration, the Handbook covers topics such as industrial communication technology, sensors, and embedded systems. The book is organized into two parts. Part 1 presents material covering new and quickly evolving aspects of IT. Part 2 introduces cutting-edge areas of industrial IT. The Handbook presents material in the form of tutorials, surveys, and technology overviews, combining fundamentals and advanced issues, with articles grouped into sections for a cohesive and comprehensive presentation. The text contains 112 contributed reports by industry experts from government, companies at the forefront of development, and some of the most renowned academic and research institutions worldwide. Several of the reports on recent developments, actual deployments, and trends cover subject matter presented to the public for the first time.
Download or read book ICT Analysis and Applications written by Simon Fong and published by Springer Nature. This book was released on 2020-12-15 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes new technologies and discusses future solutions for ICT design infrastructures, as reflected in high-quality papers presented at the 5th International Conference on ICT for Sustainable Development (ICT4SD 2020), held in Goa, India, on 23–24 July 2020. The conference provided a valuable forum for cutting-edge research discussions among pioneering researchers, scientists, industrial engineers, and students from all around the world. Bringing together experts from different countries, the book explores a range of central issues from an international perspective.
Download or read book Dynamic Spectrum Access Decisions written by George F. Elmasry and published by John Wiley & Sons. This book was released on 2020-09-01 with total page 1095 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimize your dynamic spectrum access approach using the latest applications and techniques Dynamic Spectrum Access Decisions: Local, Distributed, Centralized and Hybrid Designs prepares engineers to build optimum communications systems by describing at the outset what type of spectrum sensing capabilities are needed. Meant for anyone who has a basic understanding of wireless communications and networks and an interest in the physical and MAC layers of communication systems, this book has a tremendous range of civilian and military applications. Dynamic Spectrum Access Decisions provides fulsome discussions of cognitive radios and networks, but also DSA technologies that operate outside the context of cognitive radios. DSA has applications in: Licensed spectrum bands Unlicensed spectrum bands Civilian communications Military communications Consisting of a set of techniques derived from network information theory and game theory, DSA improves the performance of communications networks. This book addresses advanced topics in this area and assumes basic knowledge of wireless communications.
