Download or read book The Electric Power Engineering Handbook Five Volume Set written by Leonard L. Grigsby and published by CRC Press. This book was released on 2018-12-14 with total page 3036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electric Power Engineering Handbook, Third Edition updates coverage of recent developments and rapid technological growth in crucial aspects of power systems, including protection, dynamics and stability, operation, and control. With contributions from worldwide field leaders—edited by L.L. Grigsby, one of the world’s most respected, accomplished authorities in power engineering—this reference includes chapters on: Nonconventional Power Generation Conventional Power Generation Transmission Systems Distribution Systems Electric Power Utilization Power Quality Power System Analysis and Simulation Power System Transients Power System Planning (Reliability) Power Electronics Power System Protection Power System Dynamics and Stability Power System Operation and Control Content includes a simplified overview of advances in international standards, practices, and technologies, such as small-signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. Each book in this popular series supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. Volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)

Download or read book Power and Distribution Transformers written by K.R.M. Nair and published by CRC Press. This book was released on 2021-02-11 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. provides “step by step” procedures of designing a transformer so that engineers without prior knowledge or exposure to design can follow the procedures and calculation methods to acquire reasonable proficiency of designing a transformer. 2. functions as a useful guide for the practicing engineers to undertake new designs, cost optimization, design automation etc., without the need for external help or consultancy. 3. covers in detail the design processes with necessary data and calculations of a wide variety of transformers including Dry Type Cast Resin Transformer, Amorphous Core Transformer, Earthing Transformer, Rectifier Transformer, Auto Transformer, Transformers for Explosive Atmosphere, Solid State Transformer etc. 4. includes subjects like, Carbon Footprint Calculation of Transformers, Condition Monitoring of Transformers and Design Optimization Techniques. 5. based on the 50+ years experience of the author in the Power and Distribution Transformer industry.

Download or read book Electric Power Transformer Engineering written by James H. Harlow and published by CRC Press. This book was released on 2017-12-19 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Power Transformer Engineering, Third Edition expounds the latest information and developments to engineers who are familiar with basic principles and applications, perhaps including a hands-on working knowledge of power transformers. Targeting all from the merely curious to seasoned professionals and acknowledged experts, its content is structured to enable readers to easily access essential material in order to appreciate the many facets of an electric power transformer. Topically structured in three parts, the book: Illustrates for electrical engineers the relevant theories and principles (concepts and mathematics) of power transformers Devotes complete chapters to each of 10 particular embodiments of power transformers, including power, distribution, phase-shifting, rectifier, dry-type, and instrument transformers, as well as step-voltage regulators, constant-voltage transformers, transformers for wind turbine generators and photovoltaic applications, and reactors Addresses 14 ancillary topics including insulation, bushings, load tap changers, thermal performance, testing, protection, audible sound, failure analysis, installation and maintenance and more As with the other books in the series, this one supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. Important chapters have been retained from the second edition; most have been significantly expanded and updated for this third installment. Each chapter is replete with photographs, equations, and tabular data, and this edition includes a new chapter on transformers for use with wind turbine generators and distributed photovoltaic arrays. Jim Harlow and his esteemed group of contributors offer a glimpse into the enthusiastic community of power transformer engineers responsible for this outstanding and best-selling work. A volume in the Electric Power Engineering Handbook, Third Edition. Other volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) Watch James H. Harlow's talk about his book: Part One: http://youtu.be/fZNe9L4cux0 Part Two: http://youtu.be/y9ULZ9IM0jE Part Three: http://youtu.be/nqWMjK7Z_dg

Download or read book J P Transformer Book written by Martin Heathcote and published by Elsevier. This book was released on 2011-04-01 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining appropriate power systems and equipment expertise is necessary for a utility to support the reliability, availability, and quality of service goals demanded by energy consumers now and into the future. However, transformer talent is at a premium today, and all aspects of the power industry are suffering a diminishing of the supply of knowledgeable and experienced engineers.Now in print for over 80 years since initial publication in 1925 by Johnson & Phillips Ltd, the J & P Transformer Book continues to withstand the test of time as a key body of reference material for students, teachers, and all whose careers are involved in the engineering processes associated with power delivery, and particularly with transformer design, manufacture, testing, procurement, application, operation, maintenance, condition assessment and life extension.Current experience and knowledge have been brought into this thirteenth edition with discussions on moisture equilibrium in the insulation system, vegetable based natural ester insulating fluids, industry concerns with corrosive sulphur in oil, geomagnetic induced current (GIC) impacts, transportation issues, new emphasis on measurement of load related noise, and enhanced treatment of dielectric testing (including Frequency Response Analysis), Dissolved Gas analysis (DGA) techniques and tools, vacuum LTCs, shunt and series reactors, and HVDC converter transformers. These changes in the thirteenth edition together with updates of IEC reference Standards documentation and inclusion for the first time of IEEE reference Standards, provide recognition that the transformer industry and market is truly global in scale. -- From the foreword by Donald J. FallonMartin Heathcote is a consultant specializing in power transformers, primarily working for utilities. In this context he has established working relationships with transformer manufacturers on several continents. His background with Ferranti and the UK's Central Electricity Generating Board (CEGB) included transformer design and the management and maintenance of transformer-based systems.* The definitive reference for all involved in designing, installing, monitoring and maintaining high-voltage systems using power transformers (electricity generation and distribution sector; large-scale industrial applications)* The classic reference work on power transformers and their applications: first published in 1925, now brought fully up to date in this thirteenth edition* A truly practical engineering approach to design, monitoring and maintenance of power transformers – in electricity generation, substations, and industrial applications.

Download or read book Power Transformer Design Practices written by Fang Zhu and published by CRC Press. This book was released on 2021-03-22 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents basic theories of transformer operation, design principles and methods used in power transformer designing work, and includes limitation criteria, effective utilization of material, and calculation examples to enhance readers’ techniques of transformer design and testing. It includes: Core and winding commonly used, and their performances Insulation structures and materials, methods for improvements on dielectric strengths on partial discharge, breakdown and electrical creepage Losses and impedance calculations, major influential factors, and methods to minimize load loss Cooling design and the method to obtain effective cooling Short-circuit forces calculations, the ways to reduce the short-circuit forces, and measures to raise withstand abilities No-load and load-sound levels, the influential factors and trends, and abatement techniques In-depth discussion of an autotransformer’s special features, its stabilizing winding function, and its adequate size Tests and diagnostics The ways to optimize design are also discussed throughout the book as a goal to achieve best performances on economic design. The book contains great reference material for engineers, students, teachers, researchers and anyone in the field associated with power transformer design, manufacture, testing, application and service maintenance. It also provides a high level of detail to help future research and development maintain electrical power as a reliable and economical energy resource.

Download or read book Electric Power Transformer Engineering Second Edition written by James H. Harlow and published by CRC Press. This book was released on 2007-05-30 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamental theory of electric power transformers, this book provides the background required to understand the basic operation of electromagnetic induction as applied to transformers.

Download or read book The Journal of the Acoustical Society of America written by Acoustical Society of America and published by . This book was released on 2006 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standard Handbook for Electrical Engineers Seventeenth Edition written by Surya Santoso and published by McGraw Hill Professional. This book was released on 2017-11-24 with total page 1648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of every facet of electric power in a single volume This fully revised, industry-standard resource offers practical details on every aspect of electric power engineering. The book contains in-depth discussions from more than 100 internationally recognized experts. Generation, transmission, distribution, operation, system protection, and switchgear are thoroughly explained. Standard Handbook for Electrical Engineers, Seventeenth Edition, features brand-new sections on measurement and instrumentation, interconnected power grids, smart grids and microgrids, wind power, solar and photovoltaic power generation, electric machines and transformers, power system analysis, operations, stability and protection, and the electricity market. Coverage includes: •Units, symbols, constants, definitions, and conversion factors •Measurement and instrumentation •Properties of materials •Interconnected power grids •AC and DC power transmission •Power distribution •Smart grids and microgrids •Wind power generation •Solar power generation and energy storage •Substations and switch gear •Power transformers, generators, motors, and drives •Power electronics •Power system analysis, operations, stability, and protection •Electricity markets •Power quality and reliability •Lightning and overvoltage protection •Computer applications in the electric power industry •Standards in electrotechnology, telecommunications, and IT

Download or read book Electric Power Transformer Engineering written by James H. Harlow and published by CRC Press. This book was released on 2003-08-15 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamental theory of electric power transformers, this book provides the background required to understand the basic operation of electromagnetic induction as applied to transformers. The book is divided into three fundamental groupings: one stand-alone chapter is devoted to Theory and Principles, nine chapters individually treat majo

Download or read book Power and Distribution Transformers written by K.R.M. Nair and published by CRC Press. This book was released on 2021-02-12 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the author's 50+ years experience in the power and distribution transformer industry. The first few chapters of the book provide a step-by-step procedures of transformer design. Engineers without prior knowledge or exposure to design can follow the procedures and calculation methods to acquire reasonable proficiency necessary to designing a transformer. Although the transformer is a mature product, engineers working in the industry need to understand its fundamentals oand design to enable them to offer products to meet the challenging demands of the power system and the customer. This book can function as a useful guide for practicing engineers to undertake new designs, cost optimization, design automation etc., without the need for external help or consultancy. The book extensively covers the design processes with necessary data and calculations from a wide variety of transformers, including dry-type cast resin transformers, amorphous core transformers, earthing transformers, rectifier transformers, auto transformers, transformers for explosive atmospheres, and solid-state transformers. The other subjects covered include, carbon footprint salculation of transformers, condition monitoring of transformers and design optimization techniques. In addition to being useful for the transformer industry, this book can serve as a reference for power utility engineers, consultants, research scholars, and teaching faculty at universities.

Download or read book Switchgear Manual written by Hennig Gremmel and published by . This book was released on 2007 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distributed Power Generation written by H. Lee Willis and published by CRC Press. This book was released on 2000-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the view of many power experts, distributed power generation represents the paradigm of the future. Distributed Power Generation: Planning and Evaluation explores the preparation and analysis of distributed generators (DGs) for residential, commercial and industrial, as well as electric utility applications. It examines distributed generation versus traditional, centralized power systems, power demands, reliability evaluation, planning processes, costs, reciprocating piston engine DGs, gas turbine powered DGs, fuel cell powered DGs, renewable resource DGs, and more. The authors include recommendations and guidelines for DG planners, and numerous case studies illustrate the discussions.

Download or read book Solar Power in Building Design GreenSource written by Peter Gevorkian and published by McGraw Hill Professional. This book was released on 2007-10-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Implement, and Audit the Most Energy-Efficient, Cost-Effective Solar Power Systems for Any Type of Building! Solar Power in Building Design is a complete guide to designing, implementing, and auditing energy-efficient, cost-effective solar power systems for residential, commercial, and industrial buildings. From basic theory through project planning, cost estimating, and manufacturing methods, this vital resource offers you everything needed for solar power design success. Filled with case studies and illustrations, this state-of-the-art design tool covers new solar technologies...design implementation techniques...energy conservation...the economics of solar power systems...passive solar heating power...and more. Solar Power in Building Design features: Step-by-step instructions for designing, implementing, and auditing solar power systems Expert guidance on using solar power in any type of building-from basic theory through project planning, cost estimating, and manufacturing Complete details on Leadership in Energy and Environmental Design (LEED), plus rebate procedures and forms Inside This Cutting-Edge Solar Power Toolkit • Solar power physics and technology • Practical guide to solar power design • Solar power design implementation • Energy conservation • Leadership in Energy and Environmental Design (LEED) • Sustainable energy rebate • Economics of solar power systems • Passive solar heating power

Download or read book Solar PV and Wind Energy Conversion Systems written by S. Sumathi and published by Springer. This book was released on 2016-10-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook starts with a review of the principles of operation, modeling and control of common solar energy and wind-power generation systems before moving on to discuss grid compatibility, power quality issues and hybrid models of Solar PV and Wind Energy Conversion Systems (WECS). MATLAB/SIMULINK models of fuel cell technology and associated converters are discussed in detail. The impact of soft computing techniques such as neural networks, fuzzy logic and genetic algorithms in the context of solar and wind energy is explained with practical implementation using MATLAB/SIMULINK models. This book is intended for final year undergraduate, post-graduate and research students interested in understanding the modeling and control of Solar PV and Wind Energy Conversion Systems based on MATLAB/SIMULINK. - Each chapter includes “Learning Objectives” at the start, a “Summary” at the end and helpful Review Questions - Includes MATLAB/SIMULINK models of different control strategies for power conditioning units in the context of Solar PV - Presents soft computing techniques for Solar PV and WECS, as well as MATLAB/SIMULINK models, e.g. for wind turbine topologies and grid integration - Covers hybrid solar PV and Wind Energy Conversion Systems with converters and MATLAB/SIMULINK models - Reviews harmonic reduction in Solar PV and Wind Energy Conversion Systems in connection with power quality issues - Covers fuel cells and converters with implementation using MATLAB/SIMULINK

Download or read book High Voltage Test Techniques written by Dieter Kind and published by Elsevier. This book was released on 2001-01-24 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of High Voltage Test Techniques has been completely revised. The present revision takes into account the latest international developments in High Voltage and Measurement technology, making it an essential reference for engineers in the testing field. High Voltage Technology belongs to the traditional area of Electrical Engineering. However, this is not to say that the area has stood still. New insulating materials, computing methods and voltage levels repeatedly pose new problems or open up methods of solution; electromagnetic compatibility (EMC) or components and systems also demand increased attention. The authors hope that their experience will be of use to students of Electrical Engineering confronted with High Voltage problems in their studies, in research and development and also in the testing field. - Benefit from a completely revised edition - Brings you up-to-date with th latest international developments in High Voltage and Measurement technology - An essential reference for engineers in the testing field

Download or read book Plant Engineer s Handbook written by R. Keith Mobley and published by Elsevier. This book was released on 2001-05-14 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant engineers are responsible for a wide range of industrial activities, and may work in any industry. This means that breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to only certain subjects or cursory in their treatment of topics. The Plant Engineering Handbook offers comprehensive coverage of an enormous range of subjects which are of vital interest to the plant engineer and anyone connected with industrial operations or maintenance.This handbook is packed with indispensable information, from defining just what a Plant Engineer actually does, through selection of a suitable site for a factory and provision of basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes) to issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. One of the major features of this volume is its comprehensive treatment of the maintenance management function; in addition to chapters which outline the operation of the various plant equipment there is specialist advice on how to get the most out of that equipment and its operators. This will enable the reader to reap the rewards of more efficient operations, more effective employee contributions and in turn more profitable performance from the plant and the business to which it contributes.The Editor, Keith Mobley and the team of expert contributors, have practiced at the highest levels in leading corporations across the USA, Europe and the rest of the world. Produced in association with Plant Engineering magazine, this book will be a source of information for plant engineers in any industry worldwide.* A Flagship reference work for the Plant Engineering series* Provides comprehensive coverage on an enormous range of subjects vital to plant and industrial engineer* Includes an international perspective including dual units and regulations

Download or read book Alternative Energy Systems in Building Design GreenSource Books written by Peter Gevorkian and published by McGraw Hill Professional. This book was released on 2009-09-07 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design High-Performance Alternative Energy Systems for Buildings A comprehensive reference for architects and engineers, this GreenSource book provides practical design and installation guidelines for some of the most commercially viable alternative energy technologies. Construction materials, system deployment, typical installations, and environmental impact are covered. Alternative Energy Systems in Building Design includes information on LEED design, energy conservation, and solar power financing and return on investment. Power purchase agreements (PPAs) and national and international carbon cap and trade are also discussed. Valuable appendices contain detailed design data tables and certified equipment listings. Alternative Energy Systems in Building Design covers: Solar power system physics and technologies California solar initiative program Energy conservation Passive heating solar technologies Fuel cell technology Wind energy technologies Ocean energy technologies Hydroelectric and micro-hydro turbine power Geothermal energy Biofuel, biogas, and thermal depolymerization technologies Fission- and fusion-type nuclear power Air pollution abatement