Download or read book Software Maintenance Management written by Alain April and published by John Wiley & Sons. This book was released on 2012-04-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the domain of software maintenance management and provides road maps for improving software maintenance organizations. It describes full maintenance maturity models organized by levels 1, 2, and 3, which allow for benchmarking and continuous improvement paths. Goals for each key practice area are also provided, and the model presented is fully aligned with the architecture and framework of software development maturity models of CMMI and ISO 15504. It is complete with case studies, figures, tables, and graphs.

Download or read book Software Quality The Future of Systems and Software Development written by Dietmar Winkler and published by Springer. This book was released on 2015-12-10 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the scientific track of the 8th Software Quality Days Conference, SWQD 2016, held in Vienna, Austria, in January 2016. The SWQD conference offers a range of comprehensive and valuable information by presenting new ideas from the latest research papers, keynote speeches by renowned academics and industry leaders, professional lectures, exhibits, and tutorials. The five scientific full papers accepted for SWQD were each peer reviewed by three or more reviewers and selected out of 13 high-quality submissions. Further, nine short papers were also presented and are included in this book. In addition, one keynote paper by Scott Ambler and Mark Lines is also included.

Download or read book Effective Software Maintenance and Evolution written by Stanislaw Jarzabek and published by CRC Press. This book was released on 2007-05-07 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With software maintenance costs averaging 50% of total computing costs, it is necessary to have an effective maintenance program in place. Aging legacy systems, for example, pose an especially rough challenge as veteran programmers retire and their successors are left to figure out how the systems operate. This book explores program analyzers, reve

Download or read book Software Product Quality Control written by Stefan Wagner and published by Springer Science & Business Media. This book was released on 2013-07-25 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality is not a fixed or universal property of software; it depends on the context and goals of its stakeholders. Hence, when you want to develop a high-quality software system, the first step must be a clear and precise specification of quality. Yet even if you get it right and complete, you can be sure that it will become invalid over time. So the only solution is continuous quality control: the steady and explicit evaluation of a product’s properties with respect to its updated quality goals. This book guides you in setting up and running continuous quality control in your environment. Starting with a general introduction on the notion of quality, it elaborates what the differences between process and product quality are and provides definitions for quality-related terms often used without the required level of precision. On this basis, the work then discusses quality models as the foundation of quality control, explaining how to plan desired product qualities and how to ensure they are delivered throughout the entire lifecycle. Next it presents the main concepts and techniques of continuous quality control, discussing the quality control loop and its main techniques such as reviews or testing. In addition to sample scenarios in all chapters, the book is rounded out by a dedicated chapter highlighting several applications of different subsets of the presented quality control techniques in an industrial setting. The book is primarily intended for practitioners working in software engineering or quality assurance, who will benefit by learning how to improve their current processes, how to plan for quality, and how to apply state-of-the-art quality control techniques. Students and lecturers in computer science and specializing in software engineering will also profit from this book, which they can use in practice-oriented courses on software quality, software maintenance and quality assurance.

Download or read book Software Engineering for Agile Application Development written by Pang, Chung-Yeung and published by IGI Global. This book was released on 2020-02-14 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the software industry continues to evolve, professionals are continually searching for practices that can assist with the various problems and challenges in information technology (IT). Agile development has become a popular method of research in recent years due to its focus on adapting to change. There are many factors that play into this process, so success is no guarantee. However, combining agile development with other software engineering practices could lead to a high rate of success in problems that arise during the maintenance and development of computing technologies. Software Engineering for Agile Application Development is a collection of innovative research on the methods and implementation of adaptation practices in software development that improve the quality and performance of IT products. The presented materials combine theories from current empirical research results as well as practical experiences from real projects that provide insights into incorporating agile qualities into the architecture of the software so that the product adapts to changes and is easy to maintain. While highlighting topics including continuous integration, configuration management, and business modeling, this book is ideally designed for software engineers, software developers, engineers, project managers, IT specialists, data scientists, computer science professionals, researchers, students, and academics.

Download or read book Crowdsourcing written by Wei Li and published by Springer. This book was released on 2015-05-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research on the software crowdsourcing approach to develop large and complex software in a cloud-based platform. It develops the fundamental principles, management organization and processes, and a cloud-based infrastructure to support this new software development approach. The book examines a variety of issues in software crowdsourcing processes, including software quality, costs, diversity of solutions, and the competitive nature of crowdsourcing processes. Furthermore, the book outlines a research roadmap of this emerging field, including all the key technology and management issues for the foreseeable future. Crowdsourcing, as demonstrated by Wikipedia and Facebook for online web applications, has shown promising results for a variety of applications, including healthcare, business, gold mining exploration, education, and software development. Software crowdsourcing is emerging as a promising solution to designing, developing and maintaining software. Preliminary software crowdsourcing practices and platforms, including Apple's App Store and TopCoder, demonstrate the advantages of crowdsourcing in terms of software ecosystem expansion and product quality improvement.

Download or read book Security Aware Systems Applications and Software Development Methods written by Khan, Khaled M. and published by IGI Global. This book was released on 2012-05-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the prevalence of cyber crime and cyber warfare, software developers must be vigilant in creating systems which are impervious to cyber attacks. Thus, security issues are an integral part of every phase of software development and an essential component of software design. Security-Aware Systems Applications and Software Development Methods facilitates the promotion and understanding of the technical as well as managerial issues related to secure software systems and their development practices. This book, targeted toward researchers, software engineers, and field experts, outlines cutting-edge industry solutions in software engineering and security research to help overcome contemporary challenges.

Download or read book Fundamental Approaches to Software Engineering written by Matthew B. Dwyer and published by Springer. This book was released on 2007-07-04 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Fundamental Approaches to Software Engineering, FASE 2007, held in Braga, Portugal in March/April 2007 as part of ETAPS 2007, the Joint European Conferences on Theory and Practice of Software. It covers evolution and agents, model driven development, tool demonstrations, distributed systems, specification, services, testing, analysis, and design.

Download or read book Handbook of Re Engineering Software Intensive Systems into Software Product Lines written by Roberto E. Lopez-Herrejon and published by Springer Nature. This book was released on 2022-11-22 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook distils the wealth of expertise and knowledge from a large community of researchers and industrial practitioners in Software Product Lines (SPLs) gained through extensive and rigorous theoretical, empirical, and applied research. It is a timely compilation of well-established and cutting-edge approaches that can be leveraged by those facing the prevailing and daunting challenge of re-engineering their systems into SPLs. The selection of chapters provides readers with a wide and diverse perspective that reflects the complementary and varied expertise of the chapter authors. This perspective covers the re-engineering processes, from planning to execution. SPLs are families of systems that share common assets, allowing a disciplined software reuse. The adoption of SPL practices has shown to enable significant technical and economic benefits for the companies that employ them. However, successful SPLs rarely start from scratch, but instead, they usually start from a set of existing systems that must undergo well-defined re-engineering processes to unleash new levels of productivity and competitiveness. Practitioners will benefit from the lessons learned by the community, captured in the array of methodological and technological alternatives presented in the chapters of the handbook, and will gain the confidence for undertaking their own re-engineering challenges. Researchers and educators will find a valuable single-entry point to quickly become familiar with the state-of-the-art on the topic and the open research opportunities; including undergraduate, graduate students, and R&D engineers who want to have a comprehensive understanding of techniques in reverse engineering and re-engineering of variability-rich software systems.

Download or read book Handbook Of Software Aging And Rejuvenation Fundamentals Methods Applications And Future Directions written by Tadashi Dohi and published by World Scientific. This book was released on 2020-04-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Software Aging and Rejuvenation provides a comprehensive overview of the subject, making it indispensable to graduate students as well as professionals in the field. It begins by introducing fundamental concepts, definitions, and the history of software aging and rejuvenation research, followed by methods, tools, and strategies that can be used to detect, analyze, and overcome software aging.

Download or read book Software Reuse for Dynamic Systems in the Cloud and Beyond written by Ina Schaefer and published by Springer. This book was released on 2014-12-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th International Conference on Software Reuse for Dynamic Systems in the Cloud and Beyond, ICSR 2015, held in Miami, FL, USA, in January 2015. The 21 revised full papers presented together with 3 revised short papers were carefully reviewed and selected from 60 submissions. The papers cover several software engineering areas where software reuse is important, such as software product lines, domain analysis, open source, components, cloud, quality.

Download or read book Software Technologies Applications and Foundations written by Martina Seidl and published by Springer. This book was released on 2018-01-29 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the thoroughly refereed technical papers presented in six workshops collocated with the International Conference on Software Technologies: Applications and Foundations, STAF 2017, held in Marburg, Germany, in July 2017. The 15 full and 22 short papers presented were carefully reviewed and selected from 37 submissions. The events whose papers are included in this volume are: BigMDE 2017: 5th International Workshop on Scalable Model Driven Engineering GCM 2017: 8th International Workshop on Graph Computation Models GRAND 2017: 1st International Workshop on Grand Challenges in Modeling MORSE 2017: 4th International Workshop on Model-driven Robot Software Engineering OCL 2017: 17th International Workshop in OCL and Textual Modeling STAF Projects Showcase 2017: 3rd event dedicated to international and national project dissemination and cooperation

Download or read book Generative and Transformational Techniques in Software Engineering II written by Ralf Lämmel and published by Springer. This book was released on 2008-10-08 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second instance of the international summer school on Generative and Transformational Techniques in Software Engineering (GTTSE 2007) was held in Braga, Portugal, during July 2–7, 2007. This volume contains an augmented selection of the material presented at the school, including full tutorials, short tutorials, and contributions to the participants workshop. The GTTSE summer school series brings together PhD students, lecturers, technology presenters, as well as other researchers and practitioners who are interested in the generation and the transformation of programs, data, models, metamodels, documentation, and entire software systems. This concerns many areas of software engineering: software reverse and re-engineering, model-driven engineering, automated software engineering, generic language technology, to name a few. These areas di?er with regard to the speci?c sorts of metamodels (or grammars, schemas, formats etc.) that underlie the involved artifacts, and with regard to the speci?c techniques that are employed for the generation and the transformation of the artifacts. The ?rst instance of the school was held in 2005 and its proceedings appeared as volume 4143 in the LNCS series.

Download or read book The Art and Science of Analyzing Software Data written by Christian Bird and published by Elsevier. This book was released on 2015-09-02 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art and Science of Analyzing Software Data provides valuable information on analysis techniques often used to derive insight from software data. This book shares best practices in the field generated by leading data scientists, collected from their experience training software engineering students and practitioners to master data science. The book covers topics such as the analysis of security data, code reviews, app stores, log files, and user telemetry, among others. It covers a wide variety of techniques such as co-change analysis, text analysis, topic analysis, and concept analysis, as well as advanced topics such as release planning and generation of source code comments. It includes stories from the trenches from expert data scientists illustrating how to apply data analysis in industry and open source, present results to stakeholders, and drive decisions. - Presents best practices, hints, and tips to analyze data and apply tools in data science projects - Presents research methods and case studies that have emerged over the past few years to further understanding of software data - Shares stories from the trenches of successful data science initiatives in industry

Download or read book Advanced Information Systems Engineering written by Selmin Nurcan and published by Springer. This book was released on 2016-05-26 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 28th International Conference on Advanced Information Systems Engineering, CAiSE 2016, held in Ljubljana, Slovenia, in June 2016. The 35 papers presented in this volume were carefully reviewed and selected from 211 submissions. The program included the following paper sessions: Collaboration, Business Process Modeling. Innovation, Gamication, Mining and Business Process Performance, Requirements Engineering, Process Mining, Conceptual Modeling, Mining and Decision Support, Cloud and Services, Variability and Configuration, Open Source Software, and Business Process Management.

Download or read book Product Focused Software Process Improvement written by Michael Felderer and published by Springer. This book was released on 2017-11-10 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Conference on Product-Focused Software Process Improvement, PROFES 2017, held in Innsbruck, Austria, in November/December 2017. The 17 revised full papers presented together with 10 short papers, 21 workshop papers. 3 posters and tool demonstrations papers, and 4 tutorials were carefully reviewed and selected from 72 submissions. The papers are organized in topical sections on : Agile software Development; Data science and analytics; Software engineering processes and frameworks; Industry relevant qualitative research; User and value centric approaches; Software startups; Serum; Software testing.

Download or read book Advanced Informatics for Computing Research written by Ashish Kumar Luhach and published by Springer Nature. This book was released on 2019-09-16 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This two-volume set (CCIS 1075 and CCIS 1076) constitutes the refereed proceedings of the Third International Conference on Advanced Informatics for Computing Research, ICAICR 2019, held in Shimla, India, in June 2019. The 78 revised full papers presented were carefully reviewed and selected from 382 submissions. The papers are organized in topical sections on computing methodologies; hardware; information systems; networks; software and its engineering.