Download or read book Identification of Strainrate Dependent Hardening Sensitivity of Metallic Sheets Under In plane Biaxial Loading written by Wei Liu and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet metal forming processes are widely adopted to produce panels, tubes, profiled parts in manufacturing industry. The numerical simulation of the forming processes requires accurate constitutive models of material. In many sheet metal working operations such as stamping, hydroforming, ..., large strains and intermediate strain rates can be reached under biaxial strain or stress states. The objective of this work is to show the potential of the biaxial in-plane tensile test to characterize the hardening behaviour of metal sheets up to large strain levels. By numerical investigation, an optimal cruciform shape is designed to obtain large equivalent plastic strain, up to 30%, at the central zone under equi-biaxial strain path. As expected, the initial cracks of tested specimens are always observed at the central zone. Then, quasi-static and dynamic biaxial tensile tests on in-plane cross specimens have been performed on a dedicated servo-hydraulic machine. These biaxial tensile tests have been carried out on aluminium alloy AA5086 to validate the identification methodology of hardening behaviour under biaxial loading. This alloy has been chosen since its hardening behaviour is not dependent on the strain rate. Digital Image Correlation (DIC) technique is used for strain measurement. The parameters of isotropic hardening models are identified by inverse analysis based on the finite element model of the biaxial tensile test. Three yield criteria of Mises, Hill48 and Bron and Besson are compared for the parameter identification of different hardening laws. It is shown that the hardening law identified by biaxial test is precise only if an appropriate yield function is preliminarily determined. The biaxial flow stress curve identified with Bron and Besson yield function have been found in good agreement with the experimental flow stress curve obtained from uniaxial tensile tests. For biaxial tests at intermediate strain rates, damping layers are adopted to reduce oscillations on force versus time curves. The comparison of flow stress curves, identified from quasi-static and dynamic biaxial in-plane tensile tests on the non strain rate-dependent material AA5086, validates the identification methodology of strain-rate dependent hardening models. Finally, the proposed methodology is applied to the hardening characterization of a strain-rate dependent Dual Phase steel DP600 at room temperature. Identified biaxial flow stress curves have been compared with uniaxial ones for different strain rates ( . = 10-3s-1, 10-1s-1 and 101s-1). DP600 steel exhibits the same positive strain rate sensitivity for uniaxial and biaxial strain states. The biaxial flow stress curves identified on the basis of Ludwick and Voce hardening models are close, up to equivalent plastic strains of 30%. The benefits of the proposed methodology, based on a biaxial in-plane tensile test carried out on cross specimen, are clearly shown since the hardening behaviour identified in this case for large strains (up to 30%) is very different from the one identified from uniaxial tensile test on a smaller strain range.
Download or read book The Virtual Fields Method written by Fabrice Pierron and published by Springer Science & Business Media. This book was released on 2012-03-21 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Virtual Fields Method: Extracting Constitutive Mechanical Parameters from Full-field Deformation Measurements is the first and only one on the Virtual Fields Method, a recent technique to identify materials mechanical properties from full-field measurements. It contains an extensive theoretical description of the method as well as numerous examples of application to a wide range of materials (composites, metals, welds, biomaterials etc.) and situations(static, vibration, high strain rate etc.). Finally, it contains a detailed training section with examples of progressive difficulty to lead the reader to program the VFM. This is accompanied with a set of commented Matlab programs as well as with a GUI Matlab based software for more general situations.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Sheet Metal Forming written by Z. Marciniak and published by Butterworth-Heinemann. This book was released on 2002-06-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material properties -- Sheet deformation processes -- Deformation of sheet in plane stress -- Simplified stamping analysis -- Load instability and tearing -- Bending of sheet -- Simplified analysis of circular shells -- Cylindrical deep drawing -- Stretching circular shells -- Combined bending and tension of sheet -- Hydroforming.
Download or read book Forming Limit Diagrams written by Robert H. Wagoner and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formability written by Wilko C. Emmens and published by Springer Science & Business Media. This book was released on 2011-07-23 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Overview of materials and treatment aspects of manufacturability of sheet metal - Written by an industrial expert turned scientist - Concentrates on the formability of sheet metal, one of the fundamental form material is used in metalworking
Download or read book Sheet Metal Forming Processes written by Dorel Banabic and published by Springer Science & Business Media. This book was released on 2010-06-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of virtual manufacturing has been developed in order to increase the industrial performances, being one of the most ef cient ways of reducing the m- ufacturing times and improving the quality of the products. Numerical simulation of metal forming processes, as a component of the virtual manufacturing process, has a very important contribution to the reduction of the lead time. The nite element method is currently the most widely used numerical procedure for s- ulating sheet metal forming processes. The accuracy of the simulation programs used in industry is in uenced by the constitutive models and the forming limit curves models incorporated in their structure. From the above discussion, we can distinguish a very strong connection between virtual manufacturing as a general concept, ?nite element method as a numerical analysis instrument and constitutive laws,aswellas forming limit curves as a speci city of the sheet metal forming processes. Consequently, the material modeling is strategic when models of reality have to be built. The book gives a synthetic presentation of the research performed in the eld of sheet metal forming simulation during more than 20 years by the members of three international teams: the Research Centre on Sheet Metal Forming—CERTETA (Technical University of Cluj-Napoca, Romania); AutoForm Company from Zürich, Switzerland and VOLVO automotive company from Sweden. The rst chapter presents an overview of different Finite Element (FE) formu- tions used for sheet metal forming simulation, now and in the past.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1970 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1982 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Forming written by William F. Hosford and published by Cambridge University Press. This book was released on 2011-02-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps the engineer understand the principles of metal forming and analyze forming problems - both the mechanics of forming processes and how the properties of metals interact with the processes. In this fourth edition, an entire chapter has been devoted to forming limit diagrams and various aspects of stamping and another on other sheet forming operations. Sheet testing is covered in a separate chapter. Coverage of sheet metal properties has been expanded. Interesting end-of-chapter notes have been added throughout, as well as references. More than 200 end-of-chapter problems are also included.
Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.
Download or read book Mechanical Behavior of Materials written by William F. Hosford and published by Cambridge University Press. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook on the mechanical behavior of materials for mechanical and materials engineering. It emphasizes quantitative problem solving. This new edition includes treatment of the effects of texture on properties and microstructure in Chapter 7, a new chapter (12) on discontinuous and inhomogeneous deformation, and treatment of foams in Chapter 21.
Download or read book Mechanical Behaviour of Engineering Materials written by Joachim Roesler and published by Springer Science & Business Media. This book was released on 2007-10-16 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: How do engineering materials deform when bearing mechanical loads? To answer this crucial question, the book bridges the gap between continuum mechanics and materials science. The different kinds of material deformation are explained in detail. The book also discusses the physical processes occurring during the deformation of all classes of engineering materials and shows how these materials can be strengthened to meet the design requirements. It provides the knowledge needed in selecting the appropriate engineering material for a certain design problem. This book is both a valuable textbook and a useful reference for graduate students and practising engineers.
