Download or read book Identification of Dynamic Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2010-11-22 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precise dynamic models of processes are required for many applications, ranging from control engineering to the natural sciences and economics. Frequently, such precise models cannot be derived using theoretical considerations alone. Therefore, they must be determined experimentally. This book treats the determination of dynamic models based on measurements taken at the process, which is known as system identification or process identification. Both offline and online methods are presented, i.e. methods that post-process the measured data as well as methods that provide models during the measurement. The book is theory-oriented and application-oriented and most methods covered have been used successfully in practical applications for many different processes. Illustrative examples in this book with real measured data range from hydraulic and electric actuators up to combustion engines. Real experimental data is also provided on the Springer webpage, allowing readers to gather their first experience with the methods presented in this book. Among others, the book covers the following subjects: determination of the non-parametric frequency response, (fast) Fourier transform, correlation analysis, parameter estimation with a focus on the method of Least Squares and modifications, identification of time-variant processes, identification in closed-loop, identification of continuous time processes, and subspace methods. Some methods for nonlinear system identification are also considered, such as the Extended Kalman filter and neural networks. The different methods are compared by using a real three-mass oscillator process, a model of a drive train. For many identification methods, hints for the practical implementation and application are provided. The book is intended to meet the needs of students and practicing engineers working in research and development, design and manufacturing.

Download or read book Identification of Continuous Time Systems written by Allamaraju Subrahmanyam and published by CRC Press. This book was released on 2019-12-06 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models of dynamical systems are required for various purposes in the field of systems and control. The models are handled either in discrete time (DT) or in continuous time (CT). Physical systems give rise to models only in CT because they are based on physical laws which are invariably in CT. In system identification, indirect methods provide DT models which are then converted into CT. Methods of directly identifying CT models are preferred to the indirect methods for various reasons. The direct methods involve a primary stage of signal processing, followed by a secondary stage of parameter estimation. In the primary stage, the measured signals are processed by a general linear dynamic operation—computational or realized through prefilters, to preserve the system parameters in their native CT form—and the literature is rich on this aspect. In this book: Identification of Continuous-Time Systems-Linear and Robust Parameter Estimation, Allamaraju Subrahmanyam and Ganti Prasada Rao consider CT system models that are linear in their unknown parameters and propose robust methods of estimation. This book complements the existing literature on the identification of CT systems by enhancing the secondary stage through linear and robust estimation. In this book, the authors provide an overview of CT system identification, consider Markov-parameter models and time-moment models as simple linear-in-parameters models for CT system identification, bring them into mainstream model parameterization via basis functions, present a methodology to robustify the recursive least squares algorithm for parameter estimation of linear regression models, suggest a simple off-line error quantification scheme to show that it is possible to quantify error even in the absence of informative priors, and indicate some directions for further research. This modest volume is intended to be a useful addition to the literature on identifying CT systems.

Download or read book Identification of Continuous time Models from Sampled Data written by Hugues Garnier and published by Springer. This book was released on 2009-10-12 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to direct continuous-time model identification for 15 years. It cuts down on time spent hunting through journals by providing an overview of much recent research in an increasingly busy field. The CONTSID toolbox discussed in the final chapter gives an overview of developments and practical examples in which MATLAB® can be used for direct time-domain identification of continuous-time systems. This is a valuable reference for a broad audience.

Download or read book Identification of Continuous time Models from Sampled Data written by Hugues Garnier and published by Springer Science & Business Media. This book was released on 2008-03-13 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to direct continuous-time model identification for 15 years. It cuts down on time spent hunting through journals by providing an overview of much recent research in an increasingly busy field. The CONTSID toolbox discussed in the final chapter gives an overview of developments and practical examples in which MATLAB® can be used for direct time-domain identification of continuous-time systems. This is a valuable reference for a broad audience.

Download or read book Identification of Continuous Time Systems written by Allamaraju Subrahmanyam and published by CRC Press. This book was released on 2019-12-06 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models of dynamical systems are required for various purposes in the field of systems and control. The models are handled either in discrete time (DT) or in continuous time (CT). Physical systems give rise to models only in CT because they are based on physical laws which are invariably in CT. In system identification, indirect methods provide DT models which are then converted into CT. Methods of directly identifying CT models are preferred to the indirect methods for various reasons. The direct methods involve a primary stage of signal processing, followed by a secondary stage of parameter estimation. In the primary stage, the measured signals are processed by a general linear dynamic operation—computational or realized through prefilters, to preserve the system parameters in their native CT form—and the literature is rich on this aspect. In this book: Identification of Continuous-Time Systems-Linear and Robust Parameter Estimation, Allamaraju Subrahmanyam and Ganti Prasada Rao consider CT system models that are linear in their unknown parameters and propose robust methods of estimation. This book complements the existing literature on the identification of CT systems by enhancing the secondary stage through linear and robust estimation. In this book, the authors provide an overview of CT system identification, consider Markov-parameter models and time-moment models as simple linear-in-parameters models for CT system identification, bring them into mainstream model parameterization via basis functions, present a methodology to robustify the recursive least squares algorithm for parameter estimation of linear regression models, suggest a simple off-line error quantification scheme to show that it is possible to quantify error even in the absence of informative priors, and indicate some directions for further research. This modest volume is intended to be a useful addition to the literature on identifying CT systems.

Download or read book Identification of Continuous Time Systems written by N.K. Sinha and published by Springer Science & Business Media. This book was released on 1991-07-31 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the importance of system identification, the International Federation of Automatic Control (IFAC) and the International Federation of Operational Research Societies (IFORS) hold symposia on this topic every three years. Interest in continuous time approaches to system identification has been growing in recent years. This is evident from the fact that the of invited sessions on continuous time systems has increased from one in the 8th number Symposium that was held in Beijing in 1988 to three in the 9th Symposium in Budapest in 1991. It was during the 8th Symposium in August 1988 that the idea of bringing together important results on the topic of Identification of continuous time systems was conceived. Several distinguished colleagues, who were with us in Beijing at that time, encouraged us by promising on the spot to contribute to a comprehensive volume of collective work. Subsequently, we contacted colleagues all over the world, known for their work in this area, with a formal request to contribute to the proposed volume. The response was prompt and overwhelmingly encouraging. We sincerely thank all the authors for their valuable contributions covering various aspects of identification of continuous time systems.

Download or read book Identification of Continuous Time Systems written by N.K. Sinha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the importance of system identification, the International Federation of Automatic Control (IFAC) and the International Federation of Operational Research Societies (IFORS) hold symposia on this topic every three years. Interest in continuous time approaches to system identification has been growing in recent years. This is evident from the fact that the of invited sessions on continuous time systems has increased from one in the 8th number Symposium that was held in Beijing in 1988 to three in the 9th Symposium in Budapest in 1991. It was during the 8th Symposium in August 1988 that the idea of bringing together important results on the topic of Identification of continuous time systems was conceived. Several distinguished colleagues, who were with us in Beijing at that time, encouraged us by promising on the spot to contribute to a comprehensive volume of collective work. Subsequently, we contacted colleagues all over the world, known for their work in this area, with a formal request to contribute to the proposed volume. The response was prompt and overwhelmingly encouraging. We sincerely thank all the authors for their valuable contributions covering various aspects of identification of continuous time systems.

Download or read book Identification of Continuous Systems written by Heinz Unbehauen and published by . This book was released on 1987 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together important advances in the field of continuous system identification, this book deals with both parametric and nonparametric methods. It pays special attention to the problem of retaining continuous model parameters in the estimation equations, to which all the existing techniques used in estimating discrete models may be applied. It is aimed at both the academic researcher and the control engineer in industry. The techniques covered range from certain simple numerical or graphical methods applicable to some of the frequently encountered model forms, to attractive recursive algorithms for continuous model identification suitable for real time implementation. These include the recent methods based on orthogonal functions such as those of Walsh and Poisson moment functionals. Some techniques based on stable model adaptation principles are also presented and illustrated.

Download or read book Identification of Continuous Time Dynamic Systems written by Rolf Johansson and published by . This book was released on 1986 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Identification of Continuous Time Dynamical Systems with Unknown Noise Covariance written by Arunabha Bagchi and published by . This book was released on 1975 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present dissertation is a study of identifying parameters of a continuous-time dynamical system with noisy observation and with or without noise in the state of the system. In identifying parameters of a continuous-time dynamical system, the difficulty arises when the observation noise covariance is unknown. The present paper solves this problem in the case of a linear time invariant system with white noise affecting additively both the state and the observation. Likelihood functional cannot be obtained when the observation noise covariance is unknown. A similar procedure, however, works and the estimates are obtained by finding roots of an appropriate functional. It is shown that the estimates obtained are weakly consistent. In the special case of no noise in the state, it is further shown that similar procedure yields estimates that are strongly consistent. Consistency is proved under certain sufficient condition called the 'Identifiability Condition'. This condition is studied in detail and computational algorithm for determining the estimates is discussed.

Download or read book Nonlinear System Identification written by Oliver Nelles and published by Springer Nature. This book was released on 2020-09-09 with total page 1235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and scientists in academia and industry with a thorough understanding of the underlying principles of nonlinear system identification. It equips them to apply the models and methods discussed to real problems with confidence, while also making them aware of potential difficulties that may arise in practice. Moreover, the book is self-contained, requiring only a basic grasp of matrix algebra, signals and systems, and statistics. Accordingly, it can also serve as an introduction to linear system identification, and provides a practical overview of the major optimization methods used in engineering. The focus is on gaining an intuitive understanding of the subject and the practical application of the techniques discussed. The book is not written in a theorem/proof style; instead, the mathematics is kept to a minimum, and the ideas covered are illustrated with numerous figures, examples, and real-world applications. In the past, nonlinear system identification was a field characterized by a variety of ad-hoc approaches, each applicable only to a very limited class of systems. With the advent of neural networks, fuzzy models, Gaussian process models, and modern structure optimization techniques, a much broader class of systems can now be handled. Although one major aspect of nonlinear systems is that virtually every one is unique, tools have since been developed that allow each approach to be applied to a wide variety of systems.

Download or read book Identification of Continuous Dynamical Systems with spline type Modulating Functions Method written by V. Maletinsky and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Experiment Design for Dynamic System Identification written by M B Zarrop and published by Springer. This book was released on 2014-01-15 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stability of Dynamical Systems written by and published by Springer Science & Business Media. This book was released on 2008 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the analysis and synthesis of contemporary systems, engineers and scientists are frequently confronted with increasingly complex models that may simultaneously include components whose states evolve along continuous time and discrete instants; components whose descriptions may exhibit nonlinearities, time lags, transportation delays, hysteresis effects, and uncertainties in parameters; and components that cannot be described by various classical equations, as in the case of discrete-event systems, logic commands, and Petri nets. The qualitative analysis of such systems requires results for finite-dimensional and infinite-dimensional systems; continuous-time and discrete-time systems; continuous continuous-time and discontinuous continuous-time systems; and hybrid systems involving a mixture of continuous and discrete dynamics. Filling a gap in the literature, this textbook presents the first comprehensive stability analysis of all the major types of system models described above. Throughout the book, the applicability of the developed theory is demonstrated by means of many specific examples and applications to important classes of systems, including digital control systems, nonlinear regulator systems, pulse-width-modulated feedback control systems, artificial neural networks (with and without time delays), digital signal processing, a class of discrete-event systems (with applications to manufacturing and computer load balancing problems) and a multicore nuclear reactor model. The book covers the following four general topics: * Representation and modeling of dynamical systems of the types described above * Presentation of Lyapunov and Lagrange stability theory for dynamical systems defined on general metric spaces * Specialization of this stability theory to finite-dimensional dynamical systems * Specialization of this stability theory to infinite-dimensional dynamical systems Replete with exercises and requiring basic knowledge of linear algebra, analysis, and differential equations, the work may be used as a textbook for graduate courses in stability theory of dynamical systems. The book may also serve as a self-study reference for graduate students, researchers, and practitioners in applied mathematics, engineering, computer science, physics, chemistry, biology, and economics.

Download or read book Modeling Identification and Simulation of Dynamical Systems written by P. P. J. van den Bosch and published by CRC Press. This book was released on 2020-12-17 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an in-depth introduction to the areas of modeling, identification, simulation, and optimization. These scientific topics play an increasingly dominant part in many engineering areas such as electrotechnology, mechanical engineering, aerospace, and physics. This book represents a unique and concise treatment of the mutual interactions among these topics. Techniques for solving general nonlinear optimization problems as they arise in identification and many synthesis and design methods are detailed. The main points in deriving mathematical models via prior knowledge concerning the physics describing a system are emphasized. Several chapters discuss the identification of black-box models. Simulation is introduced as a numerical tool for calculating time responses of almost any mathematical model. The last chapter covers optimization, a generally applicable tool for formulating and solving many engineering problems.

Download or read book Modelling and Identification of Dynamic Systems written by N.K. Sinha and published by Springer. This book was released on 1983-06-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Hybrid Dynamical Systems written by Arjan J. van der Schaft and published by Springer. This book was released on 2007-10-03 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about dynamical systems that are "hybrid" in the sense that they contain both continuous and discrete state variables. Recently there has been increased research interest in the study of the interaction between discrete and continuous dynamics. The present volume provides a first attempt in book form to bring together concepts and methods dealing with hybrid systems from various areas, and to look at these from a unified perspective. The authors have chosen a mode of exposition that is largely based on illustrative examples rather than on the abstract theorem-proof format because the systematic study of hybrid systems is still in its infancy. The examples are taken from many different application areas, ranging from power converters to communication protocols and from chaos to mathematical finance. Subjects covered include the following: definition of hybrid systems; description formats; existence and uniqueness of solutions; special subclasses (variable-structure systems, complementarity systems); reachability and verification; stability and stabilizability; control design methods. The book will be of interest to scientists from a wide range of disciplines including: computer science, control theory, dynamical system theory, systems modeling and simulation, and operations research.