Download or read book IBM TS4500 R8 Tape Library Guide written by Ole Asmussen and published by IBM Redbooks. This book was released on 2022-03-21 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IBM® TS4500 (TS4500) tape library is a next-generation tape solution that offers higher storage density and better integrated management than previous solutions. This IBM Redbooks® publication gives you a close-up view of the new IBM TS4500 tape library. In the TS4500, IBM delivers the density that today's and tomorrow's data growth requires. It has the cost-effectiveness and the manageability to grow with business data needs, while you preserve investments in IBM tape library products. Now, you can achieve a low per-terabyte cost and high density, with up to 13 PB of data (up to 39 PB compressed) in a single 10 square-foot library by using LTO Ultrium 9 cartridges or 11 PB with 3592 cartridges. The TS4500 offers the following benefits: Support of the IBM Linear Tape-Open (LTO) Ultrium 9 tape drive: Store up to 1.04 EB 2.5:1 compressed per library with IBM LTO 9 cartridges. High availability: Dual active accessors with integrated service bays reduce inactive service space by 40%. The Elastic Capacity option can be used to eliminate inactive service space. Flexibility to grow: The TS4500 library can grow from the right side and the left side of the first L frame because models can be placed in any active position. Increased capacity: The TS4500 can grow from a single L frame up to another 17 expansion frames with a capacity of over 23,000 cartridges. High-density (HD) generation 1 frames from the TS3500 library can be redeployed in a TS4500. Capacity on demand (CoD): CoD is supported through entry-level, intermediate, and base-capacity configurations. Advanced Library Management System (ALMS): ALMS supports dynamic storage management, which enables users to create and change logical libraries and configure any drive for any logical library. Support for IBM TS1160 while also supporting TS1155, TS1150, and TS1140 tape drive. The TS1160 gives organizations an easy way to deliver fast access to data, improve security, and provide long-term retention, all at a lower cost than disk solutions. The TS1160 offers high-performance, flexible data storage with support for data encryption. Also, this enhanced fifth-generation drive can help protect investments in tape automation by offering compatibility with existing automation. Store up to 1.05 EB 3:1 compressed per library with IBM 3592 cartridges Integrated TS7700 back-end Fibre Channel (FC) switches are available. Up to four library-managed encryption (LME) key paths per logical library are available. This book describes the TS4500 components, feature codes, specifications, supported tape drives, encryption, new integrated management console (IMC), command-line interface (CLI), and REST over SCSI (RoS) to obtain status information about library components. You learn how to accomplish the following tasks: Improve storage density with increased expansion frame capacity up to 2.4 times, and support 33% more tape drives per frame

Download or read book IBM TS7700 Release 5 2 2 Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2022-07-07 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication covers IBM TS7700 R5.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on 25 years of experience, the R5.2 release includes many features that enable improved performance, usability, and security. Highlights include IBM TS7700 Advanced Object Store, an all flash TS7770, grid resiliency enhancements, and Logical WORM retention. By using the same hierarchical storage techniques, the TS7700 (TS7770 and TS7760) can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7700 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of this writing, the TS7700C supports the ability to off load to IBM Cloud® Object Storage, Amazon S3, and RSTOR. This publication explains features and concepts that are specific to the IBM TS7700 as of release R5.2. The R5.2 microcode level provides IBM TS7700 Cloud Storage Tier enhancements, IBM DS8000® Object Storage enhancements, Management Interface dual control security, and other smaller enhancements. The R5.2 microcode level can be installed on the IBM TS7770 and IBM TS7760 models only. Note: The latest Release 5.2 was split into two phases: R5.2 Phase 1 (also referred to as and ) R5.2 Phase 2 ( and R) TS7700 provides tape virtualization for the IBM z environment. Off loading to physical tape behind a TS7700 is used by hundreds of organizations around the world. Tape virtualization can help satisfy the following requirements in a data processing environment. New and existing capabilities of the TS7700 5.2.2 release includes the following highlights: Eight-way Grid Cloud, which consists of up to three generations of TS7700 Synchronous and asynchronous replication of virtual tape and TCT objects Grid access to all logical volume and object data that is independent of where it exists An all-flash TS7770 option for improved performance Full Advanced Object Store Grid Cloud support of DS8000 Transparent Cloud Tier Full AES256 encryption for data that is in-flight and at-rest Tight integration with IBM Z® and DFSMS policy management DS8000 Object Store AES256 in-flight encryption and compression Regulatory compliance through Logical WORM and LWORM Retention support Cloud Storage Tier support for archive, logical volume version, and disaster recovery Optional integration with physical tape 16 Gb IBM FICON® throughput that exceeds 5 GBps per TS7700 cluster Grid Resiliency Support with Control Unit Initiated Reconfiguration (CUIR) support IBM Z hosts view up to 3,968 common devices per TS7700 grid TS7770 Cache On-demand feature that is based capacity licensing TS7770 support of SSD within the VED server The TS7700T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1160, IBM TS1150, and IBM TS1140 tape drives that are installed in an IBM TS4500 or TS3500 tape library. The TS7770 models are based on high-performance and redundant IBM POWER9TM technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

Download or read book IBM Spectrum Archive Enterprise Edition V1 3 2 2 Installation and Configuration Guide written by Hiroyuki Miyoshi and published by IBM Redbooks. This book was released on 2022-03-10 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication helps you with the planning, installation, and configuration of the new IBM Spectrum® Archive Enterprise Edition (EE) Version 1.3.2.2 for the IBM TS4500, IBM TS3500, IBM TS4300, and IBM TS3310 tape libraries. IBM Spectrum Archive Enterprise Edition enables the use of the LTFS for the policy management of tape as a storage tier in an IBM Spectrum Scale based environment. It also helps encourage the use of tape as a critical tier in the storage environment. This edition of this publication is the tenth edition of IBM Spectrum Archive Installation and Configuration Guide. IBM Spectrum Archive EE can run any application that is designed for disk files on a physical tape media. IBM Spectrum Archive EE supports the IBM Linear Tape-Open (LTO) Ultrium 9, 8, 7, 6, and 5 tape drives. and the IBM TS1160, TS1155, TS1150, and TS1140 tape drives. IBM Spectrum Archive EE can play a major role in reducing the cost of storage for data that does not need the access performance of primary disk. The use of IBM Spectrum Archive EE to replace disks with physical tape in tier 2 and tier 3 storage can improve data access over other storage solutions because it improves efficiency and streamlines management for files on tape. IBM Spectrum Archive EE simplifies the use of tape by making it transparent to the user and manageable by the administrator under a single infrastructure. This publication is intended for anyone who wants to understand more about IBM Spectrum Archive EE planning and implementation. This book is suitable for IBM customers, IBM Business Partners, IBM specialist sales representatives, and technical specialists.

Download or read book IBM Spectrum Archive Enterprise Edition V1 2 2 written by and published by . This book was released on 2017 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM Linear Tape File System Enterprise Edition V1 1 1 2 Installation and Configuration Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2015-01-29 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication helps you with the planning, installation, and configuration of the new IBM Linear Tape File SystemTM (LTFS) Enterprise Edition (EE) V1.1.1.2 for the IBM TS3310, IBM TS3500, and IBM TS4500 tape libraries. LTFS EE enables the use of LTFS for the policy management of tape as a storage tier in an IBM General Parallel File System (IBM GPFSTM) based environment and helps encourage the use of tape as a critical tier in the storage environment. LTFS EE can run any application that is designed for disk files on tape. LTFS EE supports IBM Linear Tape-Open (LTO) Ultrium 6 and 5 tape drives in IBM TS3310, TS3500, and TS4500 tape libraries. IBM TS1140 and IBM TS1150 tape drives are supported in TS3500 and TS4500 tape libraries. LTFS EE can play a major role in reducing the cost of storage for data that does not need the access performance of primary disk. The use of LTFS EE to replace disks with tape in Tier 2 and Tier 3 storage can improve data access over other storage solutions because it improves efficiency and streamlines management for files on tape. LTFS EE simplifies the use of tape by making it transparent to the user and manageable by the administrator under a single infrastructure. This publication is intended for anyone who wants to understand more about LTFS EE planning and implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists.

Download or read book IBM Spectrum Archive Single Drive Edition and Library Edition Installation and Configuration Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2018-03-22 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IBM® Linear Tape File SystemTM (LTFS) is the first file system that works along with Linear Tape-Open (LTO) tape technology to set a new standard for ease of use and portability for open systems tape storage. In 2011, LTFS won an Engineering Emmy Award for Innovation from the Academy of Television Arts & Sciences. This IBM Redbooks® publication helps you install, tailor, and configure the IBM SpectrumTM Archive Single Drive Edition (SDE) and the IBM Spectrum ArchiveTM Library Edition (LE) products. LTFS is a file system that was originally implemented on dual-partition linear tape (IBM LTO Ultrium 5 tape drives (LTO-5) and IBM TS1140 tape drives). Now IBM Spectrum Archive SDE and LE support IBM LTO Ultrium 8, 7, 6, or 5 tape drives, and IBM TS1155, IBM TS1150, and IBM TS1140 tape drives. IBM Spectrum Archive LE supports the IBM TS4500 tape library, IBM TS3500 tape library, IBM TS3310 tape library, IBM TS3200 tape library express, IBM TS3100 tape library express, and IBM TS2900 tape autoloader express. IBM Spectrum Archive makes tape look and work like any removable media, such as a USB drive. Files and directories appear on the desktop as a directory listing. It is now simple to drag files to and from tape. Any application that is written to use disk files works with the same files on tape. IBM Spectrum Archive SDE supports stand-alone drives only. IBM Spectrum Archive LE supports tape libraries. IBM Spectrum Archive LE presents each cartridge in the library as a subdirectory in the LTFS file system. With IBM Spectrum Archive LE, you can list the contents and search all of the volumes in the library without mounting the volumes by using an in-memory index. This publication is intended for anyone who wants to understand more about IBM Linear Tape System products and their implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists.

Download or read book IBM TS7700 Release 4 2 Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2019-04-19 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication covers IBM TS7700 R4.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 20 years of virtual tape experience, the TS7760 now supports the ability to store virtual tape volumes in an object store. The TS7700 has supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is utilized by hundreds of organizations around the world. Using the same hierarchical storage techniques, the TS7700 can also off load to object storage. Given object storage is cloud based and accessible from different regions, the TS7760 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of the release of this document, the TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3. To learn about the TS7760 cloud storage tier function, planning, implementation, best practices, and support see IBM Redpaper IBM TS7760 R4.2 Cloud Storage Tier Guide, redp-5514 at: http://www.redbooks.ibm.com/abstracts/redp5514.html The IBM TS7700 offers a modular, scalable, and high-performance architecture for mainframe tape virtualization for the IBM Z® environment. It is a fully integrated, tiered storage hierarchy of disk and tape. This storage hierarchy is managed by robust storage management microcode with extensive self-management capability. It includes the following advanced functions: Improved reliability and resiliency Reduction in the time that is needed for the backup and restore process Reduction of services downtime that is caused by physical tape drive and library outages Reduction in cost, time, and complexity by moving primary workloads to virtual tape More efficient procedures for managing daily backup and restore processing Infrastructure simplification through reduction of the number of physical tape libraries, drives, and media TS7700 delivers the following new capabilities: TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3 8-way Grid Cloud consisting of any generation of TS7700 Synchronous and asynchronous replication Tight integration with IBM Z and DFSMS policy management Optional Transparent Cloud Tiering Optional integration with physical tape Cumulative 16Gb FICON throughput up to 4.8GB/s 8 IBM Z hosts view up to 496 8 equivalent devices Grid access to all data independent of where it exists The TS7760T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and IBM TS1140 tape drives installed in an IBM TS4500 or TS3500 tape library. The TS7760 models are based on high-performance and redundant IBM POWER8® technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

Download or read book IBM Spectrum Archive Enterprise Edition V1 2 6 written by Larry Coyne and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM System Storage Tape Library Guide for Open Systems written by Larry Coyne and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication presents a general introduction to Linear Tape-Open (LTO) technology and the implementation of corresponding IBM products. The IBM Enterprise 3592 Tape Drive also is described. This tenth edition includes information about the latest enhancements to the IBM Ultrium family of tape drives and tape libraries. In particular, it includes details of the latest IBM LTO Ultrium 6 tape drive technology and its implementation in IBM tape libraries. Information is included about the recently released, enhanced, higher-performance ProtecTIER servers and the features of the new version 3.2 server software. The new software also enables a new feature, the File System Interface (FSI). It also contains technical information about each IBM tape product for Open Systems. It includes generalized sections about Small Computer System Interface (SCSI) and Fibre Channel connections and multipath architecture configurations. This book also includes information about tools and techniques for library management. This edition includes details about Tape System Library Manager (TSLM). TSLM provides consolidation and simplification in large TS3500 Tape Library environments, including the IBM Shuttle Complex. This publication is intended for anyone who wants to understand more about IBM tape products and their implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists. If you do not have a background in computer tape storage products, you might need to reference other sources of information. In the interest of being concise, topics that are generally understood are not covered in detail.

Download or read book IBM Spectrum Archive Single Drive Edition and Library Edition written by Larry Coyne and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Implementing IBM Tape in I5 OS written by Babette Haeusser and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication follows The IBM System Storage Tape Libraries Guide for Open Systems, SG24-5946, and can help you plan, install, and configure IBM Ultrium LTO tape drives, as well as the TS1120 Tape Drive and libraries in i5/OS® environments. The book focuses on the setup and customization of these drives and libraries. The first part of the book gives an overview of the System i"!family of servers and describes how to attach and configure the drives and libraries. It also covers basic installation and administration. We describe the sharing and partitioning of libraries and explain the concept and usage of the Advanced Library Management System (ALMS). In the second part of the book, we document how to use these products with Backup Recovery and Media Services (BRMS), how to implement Tape Encryption, and how to use the IBM TS7520 Virtualization Engine"!with i5/OS. This book can help IBM personnel, Business Partners, and customers to better understand and implement the IBM Ultrium LTO product line, and also the TS1120 Tape Drive attached to System i servers. We assume that the reader is familiar with tape drives and libraries and has a basic understanding of System i servers and i5/OS

Download or read book IBM TS7700 Series DS8000 Object Store User s Guide Version 2 0 written by Lourie Goodall and published by IBM Redbooks. This book was released on 2021-03-22 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IBM® TS7700 features a functional enhancement that allows for the TS7700 to act as an object store for transparent cloud tiering with IBM DS8000® (DS8K), DFSMShsm (HSM), and native DFSMSdss (DSS). This function can be used to move data sets directly from DS8000 to TS7700. This IBM Redpaper publication describes the client value, and how DFSMS, DS8000, and TS7700 are set up to enable and use the function.

Download or read book IBM DS8000 High Performance Flash Enclosure Gen2 DS8000 R9 0 written by Bert Dufrasne and published by IBM Redbooks. This book was released on 2023-02-13 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® RedpaperTM publication describes the IBM DS8880 High-Performance Enclosure (HPFE) Gen2 architecture and configuration, as of DS8900 Release 9.1. The IBM® DS8000® High-Performance Flash Enclosure Gen2 (HPFE Gen2) is a 2U storage enclosure that is installed in pairs in DS8900F and DS8880 models. The flash enclosure and Flash RAID adapters are installed in pairs. Each storage enclosure pair can support 16, 32, or 48 encryption-capable flash drives (2.5-inch, 63.5 mm form factor).

Download or read book IBM z15 8561 Technical Guide written by Octavian Lascu and published by IBM Redbooks. This book was released on 2022-07-13 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication describes the features and functions the latest member of the IBM Z® platform, the IBM z15TM (machine type 8561). It includes information about the IBM z15 processor design, I/O innovations, security features, and supported operating systems. The z15 is a state-of-the-art data and transaction system that delivers advanced capabilities, which are vital to any digital transformation. The z15 is designed for enhanced modularity, which is in an industry standard footprint. This system excels at the following tasks: Making use of multicloud integration services Securing data with pervasive encryption Accelerating digital transformation with agile service delivery Transforming a transactional platform into a data powerhouse Getting more out of the platform with IT Operational Analytics Accelerating digital transformation with agile service delivery Revolutionizing business processes Blending open source and Z technologies This book explains how this system uses new innovations and traditional Z strengths to satisfy growing demand for cloud, analytics, and open source technologies. With the z15 as the base, applications can run in a trusted, reliable, and secure environment that improves operations and lessens business risk.

Download or read book OSA Express Implementation Guide written by Mike Ebbers and published by IBM Redbooks. This book was released on 2014-06-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication will help you to install, tailor, and configure the Open Systems Adapter (OSA) features that are available on IBM zEnterprise® servers. It focuses on the hardware installation and the software definitions that are necessary to provide connectivity to LAN environments. This information will help you with planning and system setup. This book also includes helpful utilities and commands for monitoring and managing the OSA features. This information will be helpful to systems engineers, network administrators, and system programmers who plan for and install OSA features. The reader is expected to have a good understanding of IBM System z® hardware, Hardware Configuration Definition (HCD) or the input/output configuration program (IOCP), Open Systems Adapter Support Facility (OSA/SF), Systems Network Architecture/Advanced Peer-to-Peer Networking (SNA/APPN), and TCP/IP protocol.

Download or read book IBM Linear Tape File System Installation and Configuration written by Larry Coyne and published by . This book was released on 2013 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IBM® Linear Tape File System (LTFS) is the first file system that works in conjunction with Linear Tape-Open (LTO) tape technology to set a new standard for ease of use and portability for open systems tape storage. In 2011, LTFS won an Engineering Emmy Award for Innovation from the Academy of Television Arts & Sciences. This IBM Redbooks® publication helps you install, tailor, and configure the new IBM Linear Tape File System Single Drive Edition (LTFS SDE), Library Edition (LTFS LE), and Storage Manager (LTFS SM). LTFS is a file system that is implemented on dual-partition linear tape (IBM LTO Ultrium 5 tape drives (LTO-5), IBM LTO Ultrium 6 tape drives (LTO-6), and IBM TS1140 tape drives). LTFS makes tape look and work like any removable media, for example, a USB drive. Files and directories appear on the desktop as a directory listing. It is now simple to drag files to and from tape. Any application that is written to use disk files works with the same files on tape. LTFS SDE supports stand-alone drives only. LTFS LE supports tape libraries. LTFS LE presents each cartridge in the library as a subdirectory in the LTFS file system. With LTFS LE, you can list the contents and search all of the volumes in the library without mounting the volumes by using an in-memory index. The LTFS SM software solution provides storage lifecycle management of archive files. Although both the LTFS SDE and the LTFS LE can write data on tape, LTFS SM provides the interface to manage files of all types in a file system structure. This file system structure makes the control of the tape library transparent to the user. LTFS SM also provides policy-based management, job scheduling, and automated file management. It provides an integrated solution to tape library users that is designed to easily manage archives at a reduced cost. It provides the tools to manage the archived files on the LTFS tapes, to group tapes into pools, and to use multiple LTFS LE nodes to scale out the LTFS archive. Metadata can be used to arrange, search, and manage the files at convenience of the users according to the policies that they choose. This publication is intended for anyone who wants to understand more about IBM Linear Tape System products and their implementation. This book is suitable for IBM clients, IBM Business Partners, IBM specialist sales representatives, and technical specialists.

Download or read book IBM DS8900F Architecture and Implementation written by Sherri Brunson and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® RedpaperRedbooks® publication describes the concepts, architecture, and implementation of the IBM DS8900F family. The WhitepaperRedpaperbook provides reference information to assist readers who need to plan for, install, and configure the DS8900F systems. This edition applies to DS8900F systems with IBM DS8000® Licensed Machine Code (LMC) 7.9.20 (bundle version 89.20.xx.x), referred to as Release 9.2. The DS8900F is an all-flash system exclusively, and it offers three classes: DS8980F: Analytic Class: The DS8980F Analytic Class offers best performance for organizations that want to expand their workload possibilities to artificial intelligence (AI), Business Intelligence (BI), and machine learning (ML). IBM DS8950F: Agility Class all-flash: The Agility Class consolidates all your mission-critical workloads for IBM Z®, IBM LinuxONE, IBM Power Systems, and distributed environments under a single all-flash storage solution.. IBM DS8910F: Flexibility Class all-flash: The Flexibility Class reduces complexity while addressing various workloads at the lowest DS8900F family entry cost. . TThe DS8900F architecture relies on powerful IBM POWER9TM processor-based servers that manage the cache to streamline disk input/output (I/O), which maximizes performance and throughput. These capabilities are further enhanced by High-Performance Flash Enclosures (HPFE) Gen2. Like its predecessors, the DS8900F supports advanced disaster recovery (DR) solutions, business continuity solutions, and thin provisioning. The IBM DS8910F Rack-Mounted model 993 is described in IBM DS8910F Model 993 Rack-Mounted Storage System Release 9.1, REDP-5566.