Download or read book IBM System Storage DS3500 Introduction and Implementation Guide written by IBM Redbooks and published by . This book was released on 2011-05-20 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM System Storage DS3500 Introduction and Implementation Guide written by Sangam Racherla and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM System Storage DS Storage Manager Copy Services Guide written by Sangam Racherla and published by IBM Redbooks. This book was released on 2011-02-28 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this IBM® Redbooks® publication is to provide customers with guidance and recommendations for how and when to use the IBM System Storage® Copy Services premium features. The topics discussed in this publication apply to the IBM System Storage DS® models DS3000, DS4000®, and DS5000 running the firmware v7.70, and IBM System Storage DS Storage Manager v10.70. Customers in today's IT world are finding a major need to ensure a good archive of their data and a requirement to create these archives with minimal interruptions. The IBM Midrange System Storage helps to fulfill these requirements by offering three copy services premium features: IBM FlashCopy® VolumeCopy Enhanced Remote Mirroring (ERM) This publication specifically addresses the copy services premium features and can be used in conjunction with the following IBM DS System Storage books: IBM System Storage DS4000 and Storage Manager V10.30, SG24-7010 IBM System Storage DS3000: Introduction and Implementation Guide, SG24-7065 IBM System Storage DS3500: Introduction and Implementation Guide, SG24-7914 IBM Midrange System Storage Hardware Guide, SG24-7676 IBM Midrange System Storage Implementation and Best Practices Guide, SG24-6363

Download or read book IBM System Storage DS3000 written by Sangam Racherla and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM System Storage DS Storage Manager Copy Services Guide written by Sangam Racherla and published by . This book was released on 2011 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this IBM® Redbooks® publication is to provide customers with guidance and recommendations for how and when to use the IBM System Storage® Copy Services premium features. The topics discussed in this publication apply to the IBM System Storage DS® models DS3000, DS4000®, and DS5000 running the firmware v7.70, and IBM System Storage DS Storage Manager v10.70. Customers in today's IT world are finding a major need to ensure a good archive of their data and a requirement to create these archives with minimal interruptions. The IBM Midrange System Storage helps to fulfill these requirements by offering three copy services premium features: IBM FlashCopy® VolumeCopy Enhanced Remote Mirroring (ERM) This publication specifically addresses the copy services premium features and can be used in conjunction with the following IBM DS System Storage books: IBM System Storage DS4000 and Storage Manager V10.30, SG24-7010 IBM System Storage DS3000: Introduction and Implementation Guide, SG24-7065 IBM System Storage DS3500: Introduction and Implementation Guide, SG24-7914 IBM Midrange System Storage Hardware Guide, SG24-7676 IBM Midrange System Storage Implementation and Best Practices Guide, SG24-6363.

Download or read book IBM System Storage DS5000 Series Hardware Guide written by Sangam Racherla and published by IBM Redbooks. This book was released on 2013-01-10 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication consolidates, in one document, detailed descriptions of the hardware configurations and options offered as part of the IBM System Storage DS5000 families of products. This edition covers updates and additional functions available with the IBM System Storage DS® Storage Manager Version 10.77 (firmware level 7.77). This book presents the concepts and functions used in planning and managing the storage servers, such as multipathing and path failover. The book offers a step-by-step guide to using the Storage Manager to create arrays, logical drives, and other basic (as well as advanced) management tasks. This publication also contains practical information about diagnostics and troubleshooting, and includes practical examples of how to use scripts and the command-line interface. This publication is intended for customers, IBM Business Partners, and IBM technical professionals who want to learn more about the capabilities and advanced functions of the DS5000 series of storage servers with Storage Manager Software V10.77. It also targets those who have a DS5000 storage subsystem and need detailed advice about how to configure it. This book is designed specifically to address the hardware features and configuration of the IBM System Storage DS5000 family and can be used in conjunction with the following IBM Redbooks publications: IBM System Storage DS5000 Series Implementation and Best Practices Guide, SG24-8024 IBM System Storage DS Storage Manager Copy Services Guide, SG24-7822

Download or read book IBM System Storage DS3000 written by Jure Arzensek and published by IBM.Com/Redbooks. This book was released on 2007-01-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM System Storage DS5000 Series Implementation and Best Practices Guide written by Sangam Racherla and published by IBM Redbooks. This book was released on 2012-12-21 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication represents a compilation of best practices for deploying and configuring the IBM System Storage® DS5000 Series family of products. This book is intended for IBM technical professionals, Business Partners, and customers responsible for the planning, deployment, and maintenance of the IBM System Storage DS5000 Series family of products. We realize that setting up DS5000 Storage Servers can be a complex task. There is no single configuration that will be satisfactory for every application or situation. First, we provide a conceptual framework for understanding the hardware in a Storage Area Network. Then, we offer our guidelines, hints, and tips for the physical installation, cabling, and zoning, using the Storage Manager setup tasks. Next, we provide a quick guide to help you install and configure the DS5000 using best practices. After that, we turn our attention to the performance and tuning of various components and features, including numerous guidelines. We look at performance implications for various application products such as IBM DB2®, Oracle, IBM Tivoli® Storage Manager, Microsoft SQL server, and in particular, Microsoft Exchange server. Then we review the various tools available to simulate workloads and to measure, collect, and analyze performance data. We also consider the IBM AIX® environment, including IBM High Availability Cluster Multiprocessing (HACMPTM) and IBM General Parallel File System (GPFSTM). This edition of the book also includes guidelines for managing and using the DS5000 with the IBM System Storage SAN Volume Controller (SVC) and IBM Storwize® V7000.

Download or read book VMware Implementation with IBM System Storage DS5000 written by Sangam Racherla and published by IBM Redbooks. This book was released on 2013-06-14 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this IBM® Redbooks® publication, we compiled best practices for planning, designing, implementing, and maintaining IBM Midrange Storage Solutions. In this publication, we use IBM System Storage® DS5000 storage subsystem for the implementation procedures, and the same procedures can be used for implementations with DCS3700 or DS3500 storage subsystems. We also compiled configurations for a VMware ESX and VMware ESXi Server host environment. Setting up an IBM Midrange Storage Subsystem is a challenging task. Our principal objective in this book is to provide you with a sufficient overview to effectively enable storage area network (SAN) storage and VMware. There is no single configuration that is satisfactory for every application or situation. However, the effectiveness of the VMware implementation is enabled by careful planning and consideration. Although the compilation of this publication is derived from an actual setup and verification, we did not stress test or test for all possible use cases that are used in a limited configuration assessment. Because of the highly customizable nature of a VMware ESXi host environment, you must consider your specific environment and equipment to achieve optimal performance from an IBM Midrange Storage Subsystem. When you are weighing the recommendations in this publication, you must start with the first principles of input/output (I/O) performance tuning. Each environment is unique and the correct settings that are used depend on the specific goals, configurations, and demands for the specific environment. This publication is intended for technical professionals who want to deploy VMware ESXi and VMware ESX Servers with IBM Midrange Storage Subsystems.

Download or read book SAN Boot Implementation and Best Practices Guide for IBM System Storage written by Sangam Racherla and published by IBM Redbooks. This book was released on 2012-09-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Booting servers from a storage area network (SAN) is being used increasingly in complex data center environments today, due to its significant benefits over the traditional method of booting from local disks. SAN Boot enables organizations to maximize consolidation of their IT resources, minimize their equipment costs, and realize the considerable management benefits of centralizing the boot process. In SAN Boot, you can deploy diskless servers in an environment where the boot disk is located on (often RAID-capable) storage connected to the SAN. The server (initiator) communicates with the storage device (target) through the SAN using the Fibre Channel host bus adapter (HBA). The system downtime is greatly minimized in case a critical component such as a processor, memory, or host bus adapter fails and needs to be replaced. The system administrator needs to swap only the hardware and reconfigure the HBA's BIOS, switch zoning, and host-port definitions on the storage server. The system image still exists on the logical drive, therefore the server is fully operational after the hardware swap and configuration change is completed. This IBM® Redbooks® publication can help you with the SAN Boot implementation. We present various SAN Boot scenarios using IBM System Storage® products that include DS5000, DS8000®, XIV®, and SVC. The operating systems that are covered include Windows 2008, Red Hat Linux, SUSE Linux, and VMware.

Download or read book IBM System Storage DCS3700 Introduction and Implementation Guide written by IBM Redbooks and published by Vervante. This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM System Storage DS8700 Architecture and Implementation written by Bertrand Dufrasne and published by IBM Redbooks. This book was released on 2011-02-12 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication describes the concepts, architecture, and implementation of the IBM System Storage® DS8700 storage subsystem. This book has reference information that will help you plan for, install, and configure the DS8700 and also discusses the architecture and components. The DS8700 is the most advanced model in the IBM System Storage DS8000® series. It includes IBM POWER6®-based controllers, with a dual 2-way or dual 4-way processor complex implementation. Its extended connectivity, with up to 128 Fibre Channel/FICON® ports for host connections, make it suitable for multiple server environments in both open systems and IBM System z® environments. If desired, the DS8700 can be integrated in an LDAP infrastructure. The DS8700 supports thin provisioning. Depending on your specific needs, the DS8700 storage subsystem can be equipped with SATA drives, FC drives, and Solid® State Drives (SSDs). The DS8700 can now automatically optimize the use of SSD drives through its no charge Easy Tier feature. The DS8700 also supports Full Disk Encryption (FDE) feature. Its switched Fibre Channel architecture, dual processor complex implementation, high availability design, and the advanced Point-in-Time Copy and Remote Mirror and Copy functions that incorporates make the DS8700 storage subsystem suitable for mission-critical business functions.

Download or read book IBM SAN Volume Controller 2145 DH8 Introduction and Implementation written by Jon Tate and published by IBM Redbooks. This book was released on 2015-01-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data is the new currency of business, the most critical asset of the modern organization. In fact, enterprises that can gain business insights from their data are twice as likely to outperform their competitors; yet, 72 percent of them have not started or are only planning big data activities. In addition, organizations often spend too much money and time managing where their data is stored. The average firm purchases 24% more storage every year, but uses less than half of the capacity it already has. A member of the IBM® Storwize® family, IBM SAN Volume Controller (SVC) Data Platform is a storage virtualization system that enables a single point of control for storage resources to help support improved business application availability and greater resource utilization. The objective is to manage storage resources in your IT infrastructure and to make sure they are used to the advantage of your business, and do it quickly, efficiently, and in real time, while avoiding increases in administrative costs. Virtualizing storage with SVC Data Platform helps make new and existing storage more effective. SVC Data Platform includes many functions traditionally deployed separately in disk systems. By including these in a virtualization system, SVC Data Platform standardizes functions across virtualized storage for greater flexibility and potentially lower costs. SVC Data Platform functions benefit all virtualized storage. For example, IBM Easy Tier® optimizes use of flash storage. And IBM Real-time CompressionTM enhances efficiency even further by enabling the storage of up to five times as much active primary data in the same physical disk space. Finally, high-performance thin provisioning helps automate provisioning. These benefits can help extend the useful life of existing storage assets, reducing costs. Integrating these functions into SVC Data Platform also means that they are designed to operate smoothly together, reducing management effort. In this IBM Redbooks® publication, we discuss the latest features and functions of the SVC 2145-DH8 and software version 7.3, implementation, architectural improvements, and Easy Tier.

Download or read book IBM Midrange System Storage Implementation and Best Practices Guide written by Sangam Racherla and published by IBM Redbooks. This book was released on 2010-03-31 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication represents a compilation of best practices for deploying and configuring IBM Midrange System StorageTM servers, which include the DS4000® and the DS5000 family of products. This book is intended for IBM technical professionals, Business Partners, and customers responsible for the planning, deployment, and maintenance of the IBM Midrange System Storage family of products. We realize that setting up DS4000 and DS5000 Storage Servers can be a complex task. There is no single configuration that will be satisfactory for every application or situation. First, we provide a conceptual framework for understanding the hardware in a Storage Area Network. Then we offer our guidelines, hints, and tips for the physical installation, cabling, and zoning, using the Storage Manager setup tasks. After that, we turn our attention to the performance and tuning of various components and features, including numerous guidelines. We look at performance implications for various application products such as DB2®, Oracle, Tivoli® Storage Manager, Microsoft® SQL server, and in particular, Microsoft Exchange with IBM Midrange System Storage servers. Then we review the various tools available to simulate workloads and to measure, collect, and analyze performance data. We also consider the AIX® environment, including High Availability Cluster Multiprocessing (HACMPTM) and General Parallel File System (GPFSTM). Finally, we provide a quick guide to the storage server installation and configuration using best practices. This edition of the book also includes guidelines for managing and using the DS4000 and DS5000 with the IBM System Storage SAN Volume Controller (SVC).

Download or read book IBM Reference Configuration for VMware on System x with SmartCloud Entry written by Srihari Angaluri and published by IBM Redbooks. This book was released on 2012-07-21 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: IBM® SmartCloudTM Entry provides a fully integrated software stack for transforming a virtualized environment to a cloud environment. The intuitive self-service portal allows users to get up and running quickly. Built-in workload metering and additional tools enable tight controls and planning. The IBM Reference Configuration for VMware on IBM System x® with SmartCloud Entry provides an affordable, easy to deploy, private cloud architecture with configurations based on leading-edge technology from IBM, VMware, and Juniper Networks. The reference configuration is for midsized companies that need simpler and affordable IT solutions, without compromising on functionality. IBM and VMware, world leaders in enterprise-class IT solutions, are now bringing IT solutions tailored to the midmarket. This IBM RedpaperTM publication provides setup, configuration, and deployment details for the reference configuration and is intended for IT professionals who are familiar with software and hardware setup and configuration.

Download or read book Implementing the IBM Storwize V3500 written by Jon Tate and published by IBM Redbooks. This book was released on 2013-10-21 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Businesses of all sizes are faced with the challenge of managing huge volumes of data that are becoming increasingly valuable. But storing this data can be costly, and extracting value from the data is becoming more and more difficult. IT organizations have limited resources and cannot afford to make investment mistakes. The IBM® Storwize® V3500 system provides a smarter solution that is affordable, simple, and efficient, which enables businesses to overcome their storage challenges. IBM Storwize V3500 is the most recent addition to the IBM Storwize family of disk systems. It delivers easy-to-use, entry-level configurations that are specifically designed to meet the modest budgets of small and medium-sized businesses. IBM Storwize V3500 features the following highlights: - Consolidate and share data with low cost iSCSI storage networking. - Deploy storage in minutes and perform storage management tasks quickly and easily through a breakthrough graphical user interface. - Experience peace of mind with proven IBM Storwize family high-availability data protection with snapshot technology and IBM warranty support. - Optimize efficiency by allocating only the amount of disk space needed at the time it is required with high performance, thin-provisioning capabilities.

Download or read book End to end Integration with IBM Sterling B2B Integration and Managed File Transfer solutions written by James Ballentine and published by IBM Redbooks. This book was released on 2012-07-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Across numerous vertical industries, enterprises are challenged to improve processing efficiency as transactions flow from their business communities to their internal systems and vice versa, simplify management and expansion of the external communities, accommodate customer and supplier preferences, govern the flow of information, enforce policy and standards, and protect sensitive information. Throughout this process, external partners must be on-boarded and off-boarded, information must flow across multiple communications infrastructures, and data must be mapped and transformed for consumption across multiple applications. Some transactions require synchronous or real-time processing while others are of a more periodic nature. For some classes of customer or supplier, the enterprise might prefer a locally-managed, on-premise solution. For some types of communities (often small businesses), an as-a-Service solution might be the best option. Many large enterprises combine the on-premise and as-a-Service approach to serve different categories of business partners (customers or suppliers). This IBM® Redbooks® publication focuses on solutions for end-to-end integration in complex value chains and presents several end-to-end common integration scenarios with IBM Sterling and IBM WebSphere® portfolios. We believe that this publication will be a reference for IT Specialists and IT Architects implementing an integration solution architecture involving IBM Sterling and IBM WebSphere portfolios.