Download or read book Hypervelocity Impact Hvi Volume 2 Wle Small Scale Fiberglass Panel Flat Multi Layer Targets A 1 A 2 and B 1 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-22 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. The objective of Targets A-1, A-2, and B-2 was to study hypervelocity impacts through multi-layered panels simulating Whipple shields on spacecraft. Impact damage was detected using lightweight, low power instrumentation capable of being used in flight. Gorman, Michael R. and Ziola, Steven M. Langley Research Center HYPERVELOCITY IMPACT; GLASS FIBERS; PANELS; LEADING EDGES; SIMULATION; WINGS; TARGETS; IMPACT TESTS; SPACE DEBRIS; DETECTION; SIGNAL TRANSMISSION; METEORITE COLLISIONS; WAVEFORMS; KINETIC ENERGY; LINEARITY; ELECTROMAGNETIC INTERFERENCE; TEST FACILITIES

Download or read book Hypervelocity Impact written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. The objective of Targets A-1, A-2, and B-2 was to study hypervelocity impacts through multi-layered panels simulating Whipple shields on spacecraft. Impact damage was detected using lightweight, low power instrumentation capable of being used in flight.

Download or read book Hypervelocity Impact Hvi Volume 3 Wle Small Scale Fiberglass Panel Flat Target C 1 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-22 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. The objective of Target C-1 was to study hypervelocity impacts on the reinforced carbon-carbon (RCC) panels of the Wing Leading Edge. Fiberglass was used in place of RCC in the initial tests. Impact damage was detected using lightweight, low power instrumentation capable of being used in flight. Gorman, Michael R. and Ziola, Steven M. Langley Research Center HYPERVELOCITY IMPACT; WINGS; LEADING EDGES; PANELS; GLASS FIBERS; TARGETS; CARBON-CARBON COMPOSITES; MICROMETEOROIDS; DEBRIS; IMPACT DAMAGE; DETECTION; ELECTROMAGNETIC INTERFERENCE; KINETIC ENERGY; WAVE PROPAGATION

Download or read book Hypervelocity Impact Hvi Volume 4 Wle Small Scale Fiberglass Panel Flat Target C 2 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-22 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. The objective of Target C-2 was to study impacts through the reinforced carboncarbon (RCC) panels of the Wing Leading Edge. Fiberglass was used in place of RCC in the initial tests. Impact damage was detected using lightweight, low power instrumentation capable of being used in flight. Gorman, Michael R. and Ziola, Steven M. Langley Research Center GLASS FIBERS; HYPERVELOCITY IMPACT; LEADING EDGES; PANELS; TARGETS; WINGS; SPACE SHUTTLES; CARBON-CARBON COMPOSITES; TEST FACILITIES; ACOUSTIC EMISSION; SIGNAL TRANSMISSION; ELECTROMAGNETIC WAVE TRANSMISSION; WAVE PROPAGATION; KINETIC ENERGY; IMPACT TESTS; WAVEFORMS; IMPACT VELOCITY

Download or read book Hypervelocity Impact written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. The objective of Target C-2 was to study impacts through the reinforced carboncarbon (RCC) panels of the Wing Leading Edge. Fiberglass was used in place of RCC in the initial tests. Impact damage was detected using lightweight, low power instrumentation capable of being used in flight.

Download or read book Hypervelocity Impact written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. The objective of Target C-1 was to study hypervelocity impacts on the reinforced carbon-carbon (RCC) panels of the Wing Leading Edge. Fiberglass was used in place of RCC in the initial tests. Impact damage was detected using lightweight, low power instrumentation capable of being used in flight.

Download or read book Projectile Size Effects on Hypervelocity Impact Craters in Aluminum written by B. Pat Denardo and published by . This book was released on 1967 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book PROCEEDINGS OF THE SIXTH SYMPOSIUM ON HYPERVELOCITY IMPACT CLEVELAND OHIO APRIL 30 MAY 1 2 1963 SPONSORED BY U S ARMY U S AIR FORCE U S NAVY VOLUME 2 written by and published by . This book was released on 1963 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Hypervelocity cratering data and a crater-depth model for the regime of fluidity, Fluid impact craters and hypervelocity -high-velocity impact experiments in metals and rocks, Energy balances in hypervelocity penetration, The partition of energy for hypervelocity impact craters formed in rock, Transient observations of crater formation in semi-infinite targets, Influence of target strength of hypervelocity crater formation in aluminum, Some phenomena associated with impacts into aluminum, Particle-solid impact phenomena, Investigation of the impact of copper filaments into aluminum targets at velocities to 16,000 feet per second, Ionization associated with hypervelocity impact, Investigation of impact flash at low ambient pressures, An investigation of the phenomena of impact flash and its potential use as a hit detection and target discrimination technique, Summary of theoretical and experimental studies of crater formation.

Download or read book Hypervelocity Impact Hvi Volume 1 General Introduction written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2019-01-14 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. This volume contains an executive summary, overview of the method, brief descriptions of all targets, and highlights of results and conclusions. Gorman, Michael R. and Ziola, Steven M. Langley Research Center NASA/CR-2007-214885/VOL1

Download or read book Hypervelocity Impact written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. The objective of Target Fg(RCC)-2 was to study hypervelocity impacts through the reinforced carbon-carbon (RCC) panels of the Wing Leading Edge. Fiberglass was used in place of RCC in the initial tests. Impact damage was detected using lightweight, low power instrumentation capable of being used in flight.

Download or read book Hypervelocity Impact HVI Volume 1 General Introduction written by National Aeronaut Administration (Nasa) and published by . This book was released on 2020-08-03 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: During 2003 and 2004, the Johnson Space Center's White Sands Testing Facility in Las Cruces, New Mexico conducted hypervelocity impact tests on the space shuttle wing leading edge. Hypervelocity impact tests were conducted to determine if Micro-Meteoroid/Orbital Debris impacts could be reliably detected and located using simple passive ultrasonic methods. This volume contains an executive summary, overview of the method, brief descriptions of all targets, and highlights of results and conclusions. Gorman, Michael R. and Ziola, Steven M. Langley Research Center NASA/CR-2007-214885/VOL1 NNL05AC19T; WBS 377816.06.03.03.06 HYPERVELOCITY IMPACT; SPACE SHUTTLES; LEADING EDGES; IMPACT TESTS; TEST FACILITIES; SPACE DEBRIS; ULTRASONICS; MICROMETEOROIDS; DETECTION; SPALLING; WAVEFORMS; SIMULATION; KINETIC ENERGY; DATA PROCESSING

Download or read book Drinking Water Treatment written by Chittaranjan Ray and published by Springer Science & Business Media. This book was released on 2011-06-16 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable technologies for water supply are urgently needed if water has to be supplied to billions of less fortunate people with inadequate access to water. These technologies must be simple, less expensive, less energy intensive, and easy to maintain for their adaptation among the poor masses. Four appropriate technologies are discussed here: solar pasteurization, membrane desalination, natural filtration (riverbank filtration), and solar distillation. Solar pasteurization can be a useful means of producing water at remote, but sunny locations where fuel may not be easily available for boiling water. Membrane desalination will remain as a viable means of drinking water production for individual households to large communities. Various membrane filtration techniques as well as the means to “democratize” membrane filtration have been presented. Riverbank filtration is a “natural” filtration technique where drinking water is produced by placing wells on the banks of rivers. The riverbed/bank material and the underlying aquifer act as natural filters to remove pollutants from river water. Solar distillation can be a viable method of drinking water production for individual households to small communities without the input of external energy. Sustainability framework and technology transfer are discussed through transdisciplinary analysis.

Download or read book Energy Environment Productivity written by National Science Foundation (U.S.) and published by . This book was released on 1974 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book In Situ Monitoring of Fiber Reinforced Composites written by Markus G.R. Sause and published by Springer. This book was released on 2018-05-31 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: “...a comprehensive and well written book, which...will be useful reading for both researchers entering the field and experienced specialists looking for new ideas....a valuable and long-lasting contribution to experimental mechanics.” – Stepan Lomov, KU Leuven This expert volume, an enhanced Habilitation thesis by the head of the Materials Testing Research Group at the University of Augsburg, provides detailed coverage of a range of inspection methods for insitu characterization of fiber-reinforced composites. The failure behavior of fiber reinforced composites is a complex evolution of microscopic damage phenomena. Beyond the use of classical testing methods, the ability to monitor the progression of damage insitu offers new ways to interpret the materials failure modes. Methods covered include digital image correlation, acoustic emission, electromagnetic emission, computed tomography, thermography, shearography, and promising method combinations. For each method, the discussion includes operational principles and practical applications for quality control as well as thoughtful assessment of the method's strengths and weakness so that the reader is equipped to decide which method or methods are most appropriate in a given situation. The book includes extensive appendices covering common experimental parameters influencing comparability of acoustic emission measurements; materials properties for modeling; and an overview of terms and abbreviations.

Download or read book Experiments in Reduced Gravity written by Nikolaus Kuhn and published by Elsevier. This book was released on 2014-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments in Reduced Gravity: Sediment Settling on Mars is the first book to be published that reflects experiments conducted on Martian geomorphology in reduced gravity. This brief yet important book on sediment experiments assesses the theoretical and empirical foundation of the models used to analyze the increasing information we have on the past geography on Mars. The book also evaluates the need to develop new methods for analyzing new information by providing a conceptual outline and a case study on how experiments can be used to test current theoretical considerations. The conceptual approach to identifying the need for and role of experiments will be of interest to planetary scientists and geoscientists not necessarily involved with Mars, but those using experiments in their research who can apply the book's concepts.

Download or read book Phonetics Theory and Application written by William R. Tiffany and published by McGraw-Hill Humanities, Social Sciences & World Languages. This book was released on 1977 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Yvain written by Chretien de Troyes and published by Yale University Press. This book was released on 1987-09-10 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: A twelfth-century poem by the creator of the Arthurian romance describes the courageous exploits and triumphs of a brave lord who tries to win back his deserted wife's love