Download or read book Hydrothermal Synthesis and Characterisation of Titania Nanoparticles written by Paul John Franklyn and published by . This book was released on 2004 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Situ Hydrothermal Synthesis and Process Characterization of Titanium Dioxide Nanoparticles written by Mohammad Rehan and published by . This book was released on 2011 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Dioxide Nanoparticles written by Yucheng Lan and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, titanium dioxide has been an important material for different sectors of modern technology. More precisely, this ceramic has been synthesised in the form of nanomaterial and applied in buildings, dye-sensitised solar cells, hydrogen production, sensors, rechargeable batteries, electrocatalysis, self-cleaning, environmental pollution, and antibacterial actions based on its enhanced optical properties. This book describes preparation, photocatalytic properties, and applications of nanostructured titanium dioxide with a particular focus on non-traditional syntheses and brookite. Titanium oxide nanoparticles are produced by hydrothermal processes, ionic liquid-assisted reactions, biological approaches, ball-milling techniques, etc. Physical properties and potential future applications of the produced nanostructured titanium dioxide nanoparticles are reviewed. Toxicity of titanium oxide nanoparticles and titanium oxide nanowires are also discussed.
Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: -Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications -Includes black TiO2 based cancer theranostics in its coverage -Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.
Download or read book Titanate and Titania Nanotubes written by Dmitry V. Bavykin and published by Royal Society of Chemistry. This book was released on 2010 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exciting new book is a unique compilation of data from a wide range of chemical and spectroscopic instrumentation and the integration of nanostructure characterisation drawn from physical, chemical, electrochemical, spectroscopic and electron microscopic measurements. It fills a gap in the current nanomaterials literature by documenting the latest research from scientific journals and patent literature to provide a concise yet balanced and integrated treatment of an interesting topic: titanium oxide nanostructures within the emerging fashionable area of nanomaterials. Of particular interest are the following key chapters: * Modification and Coating Techniques - provides a unique summary and discussion of available techniques to coat surfaces with nanostructured materials * Chemical Properties - relates structure to surface chemistry and hence applications * Structural and Physical Properties - reviews the relationship between nanostructure and physical properties providing a basis for the rationalisation of applications The book, a valuable reference point, is aimed at professionals, postgraduates and industrial research workers in nanomaterials. Readers will gain a knowledge of the methods for synthesising nanomaterials as well as an understanding of their structure and resulting physical characteristics and a knowledge of their (existing and potential) applications.
Download or read book Titanium Dioxide written by Magdalena Janus and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is mainly used as a pigment and photocatalyst. It is possible to find it in food, cosmetics, building materials, electric devices, and others. This book contains chapters about characteristics of anatase and rutile crystallographic structure of titanium dioxide and the use of theoretical calculation for photoactivity determination.
Download or read book Synthesis and Characterization of Nitrogen doped Titanium Oxide Nanoparticles for Visible light Photocatalytic Wastewater Treatment written by Mohammad Ali Pelaschi and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: TiO2 nanoparticles are one of the most suitable materials for photocatalysis, specifically for water and air treatment and removal of a wide variety of organic pollutants such as dyes, aromatic compounds, and chlorinated aromatic compounds. Methods of synthesis of TiO2 are generally categorized in two main classes of wet chemical, and dry methods. Wet chemical methods generally provide a better control over size, size distribution, and shape; all of which significantly affect photocatalytic performance of the produced nanoparticles. Despite its advantages over other semiconductor photocatalysts, wide band-gap of titania restrains its photocatalytic activity to only UV light, which only makes up to 5% of the light reaching surface of the earth. To induce visible-light activity, titania has been doped by different dopants, including transition metal-dopants such as Fe, and Co and non-metal dopants such as N, and C. Nitrogen has been shown to be a better dopant, providing a suitably placed energy state within the band-gap of TiO2, and not suffering from issues related to transition-metal dopants such as low thermal and physical stability and high electron-hole recombination rates. To dope titania with nitrogen, one could add the nitrogen source together with other precursors during synthesis, referred to as wet chemical doping methods, or anneal the synthesized titania nanoparticles under a flow of ammonia at high temperatures, referred to as dry doping methods. While different doping methods have been studied individually, the author maintains that there has been an absence of research comparing the effectiveness of these methods, on photocatalytic performance of N-doped TiO2 within a consistent experiment. In this research TiO2 nanoparticles were synthesized by a facile, inexpensive sol-gel method, and doping was done by wet chemical methods, dry methods, and a combination of both these methods. Visible-light photocatalytic activity of these nanoparticles was evaluated by their efficiency in degradation of methyl orange. The results show wet doping methods increase the efficiency of titania nanoparticles more than dry doping, or combination of both. Further investigation showed that the main reason for higher activity of wet chemically doped nanoparticles is due to their higher available surface area of 131.7 m2.g-1. After normalizing the available surface area, measured by the BET method, it was shown that a combination of wet chemical doping, and dry doping at 600 °C result in the most active nanoparticles, but high temperature dry doping severely decreases the surface area, lowering the overall efficiency of the product. Additionally, N-doped TiO2 nanoparticles were synthesized using a simple hydrothermal method, in which the nitrogen source was used not only to dope, but also to control shape, size, size distribution, and morphology of the titania nanoparticles, and to induce aqueous colloidal stability. It was shown that addition of triethylamine during the synthesis, results in ultra-small, colloidally stable, cubic TiO2 nanoparticles, while using triethanolamine results in formation of TiO2 pallets, assembled into spherical, rose-like structures. The synthesized nanoparticles show impressive efficiency in visible-light removal of phenol, 4-chlorophenol, and pentachlorophenol, achieving 100% degradation of a 100-ppm phenol solution in 90 min, more than 98% degradation of a 20-ppm 4-chlorophenol solution in 90 min, and 97% degradation of a 10-ppm pentachlorophenol in 180 min with 500 ppm loading of the catalyst in all cases. Moreover, synthesized nanoparticles showed no sign of deactivation after 5 consecutive runs, removing 4-chlorophenol, showing their reusability.
Download or read book Recent Applications in Sol Gel Synthesis written by Usha Chandra and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Versatility, extended compositional ranges, better homogeneity, lesser energy consumption, and requirement of nonexpensive equipments have boosted the use of sol-gel process on top of the popularity in the synthesis of nanosystems. The sol-gel technique has not only revolutionized oxide ceramics industry and/or material science but has also extended widely into multidimensional applications. The book Recent Applications in Sol-Gel Synthesis comprises 14 chapters that deal mainly with the application-oriented aspects of the technique. Sol-gel prepared metal oxide (MO) nanostructures like nanospheres, nanorods, nanoflakes, nanotubes, and nanoribbons have been employed in biomedical applications involving drug deliveries, mimicking of natural bone, and antimicrobial activities. The possibility of controlling grain size in aerogel and preparation of ultrahigh-temperature ceramic (UHTC)-based materials, fluorescent glasses, ultraviolet photosensors, and photocatalysts have been discussed in detail by the experts in the field. The usefulness of sol-gel materials as active GRIN, as textile finisher, and as leather modifier with water-repellent and oil-resistive properties would be an incentive for researchers keen to pursue the field.
Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.
Download or read book Hydrothermal Synthesis and Characterization of Doped Co doped Titanium Dioxide Nanotubes for Methyl Orange Degradation written by Mohd Hasmizam Razali and published by . This book was released on 2015 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanostructured Titanium Dioxide Materials written by Ali Reza Khataee and published by World Scientific. This book was released on 2012 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, research and development in the area of synthesis and applications of different nanostructured titanium dioxide have become tremendous. This book briefly describes properties, production, modification and applications of nanostructured titanium dioxide focusing in particular on photocatalytic activity. The physicochemical properties of nanostructured titanium dioxide are highlighted and the links between properties and applications are emphasized. The preparation of TiO2 nanomaterials, including nanoparticles, nanorods, nanowires, nanosheets, nanofibers, and nanotubes are primarily categorized by their preparation method (sol-gel and hydrothermal processes). Examples of early applications of nanostructured titanium dioxide in dye-sensitized solar cells, hydrogen production and storage, sensors, rechargeable batteries, electrocatalysis, self-cleaning and antibacterial surfaces and photocatalytic cancer treatment are reviewed. The review of modifications of TiO2 nanomaterials is mainly focused on the research related to the modifications of the optical properties of TiO2 nanomaterials, since many applications of TiO2 nanomaterials are closely related to their optical properties. Photocatalytic removal of various pollutants using pure TiO2 nanomaterials, TiO2-based nanoclays and non-metal doped nanostructured TiO2 are also discussed.
Download or read book Physics and Engineering of New Materials written by Do Tran Cat and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the majority of the contributions to the Tenth German-Vietnamese Seminar on Physics and Engineering (GVS10) that took place in the Gustav- Stresemann-Institut (GSI) in Bonn from June 6 to June 9, 2007. In the focus of these studies are the preparation and basic properties of new material systems, related investigation methods, and practical applications. Accordingly the sections in this book are entitled electrons: transport and confinement, low-dimensional systems, magnetism, oxidic materials, organic films, new materials, and methods. The series of German-Vietnamese seminars was initiated and sponsored by the Gottlieb Daimler- and Karl Benz -Foundation since 1998 and took place alt- nately in both countries. These bilateral meetings brought together top-notch senior and junior Vietnamese scientists with German Scientists and stimulated many contacts and co-operations. Under the general title “Physics and Engine- ing” the programs covered, in the form of keynote-lectures, oral presentations and posters, experimental and theoretical cutting-edge material-physics oriented topics. The majority of the contributions was dealing with modern topics of material science, particularly nanoscience, which is a research field of high importance also in Vietnam. Modern material science allows a quick transfer of research results to technical applications, which is very useful for fast developing countries like Vietnam. On the other hand, the seminars took profit from the strong cro- fertilization of the different disciplines of physics. This book is dedicated to the tenth anniversary of the seminars and nicely shows the scientific progress in Vietnam and the competitive level reached.
Download or read book Frontiers of Textile Materials written by Mohd Shabbir and published by John Wiley & Sons. This book was released on 2020-03-17 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book “Frontiers and Textile Materials will deal with the important materials that can be utilized for value-addition and functionalization of textile materials. The topics covered in this book includes the materials like enzymes, polymers, etc. that are utilized for conventional textile processing and the advanced materials like nanoparticles which are expected to change the horizons of textiles. The futuristic techniques for textile processing like plasma are also discussed.
Download or read book Synthesis Characterization and Applications of Nanomaterials in the Field of Photocatalysis written by Shamaila Sajjad and published by GRIN Verlag. This book was released on 2011-08 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2011 in the subject Chemistry - Materials Chemistry, East China University of Science and Technology (-), language: English, abstract: Considerable effort has been made to design, fabricate, and manipulate nanostructured materials by innovative approaches. The precise control of nanoscale structures will pave the way not only for elucidating unique size/shape dependent physicochemical properties but also for realizing new applications in science and technology. Nanotechnology offers unprecedented opportunities for improving our daily lives and the environment in which we live. This thesis mainly describes recent progress in the design, fabrication, and modification of nanostructured semiconductor materials for environmental applications. The scope of this thesis covers TiO2, Bi2O3 and BiOCl materials, focusing particularly on TiO2-based nanostructures (e.g., pure, doped, coupled, mesoporous, hierarchically porous, and ordered mesoporous TiO2). Mesoporous titania is of particular interest since this class of materials possesses well-defined porosity and large specific surface areas. For photocatalytic degradation of organics, these desirable properties are anticipated to improve the efficiency. So in the first part of work, I have synthesized the mesoporous titania by using poly ethylene glycol as a template in dilute acetic acid aqueous solution by hydrothermal process and investigated the effect of PEG molecular weights and thermal treatment on the resultant structure and photocatalytic activity. When the molecular weights of PEG vary from 600 to 20,000, the particle sizes of mesoporous-TiO2 structure decrease from 15.1 to 13.3 nm and mean pore sizes increase from 6.9-10.6 nm. The activities of these mesoporous-TiO2 photocatalysts prepared by using PEG are evaluated and compared with Degussa P-25 using chloro-phenol as a testing compound. [...]
Download or read book Characterization and Control of Interfaces for High Quality Advanced Materials III written by Kevin Ewsuk and published by John Wiley & Sons. This book was released on 2010-09-29 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume features 59 peer-reviewed papers from ICCCI2009 on interface characterization and control technology, powder and composite processing, joining, the control of airborne particulates, new metallic glasses, and interface phenomena at high temperature. ICCCI2009 was supported by the Global COE Program “Center of Excellence for Advanced Structural and Functional Materials Design” lead by Professor Tomoyuki Kakeshita at Osaka University, the Project on Joining Technology for New Metallic Glasses and Inorganic Materials, the Institute of Materials Research (IMR) of Tohoku University, the Materials and Structures Laboratory (MSL) of the Tokyo Institute of Technology, Kobe Gakuin University, Hosokawa Powder Technology Foundation, the Japan JSPS 124th Committee, and the Joining and Welding Research Institute (JWRI) of Osaka University. Over 160 scientists and engineers from academia and industry from 18 different countries attended ICCCI2009 to see and discuss 140 invited and contributed presentations and posters on the state-of-the-art of interface characterization and control for particulate materials, joining, and nanotechnology.
Download or read book Perovskite Materials written by Likun Pan and published by BoD – Books on Demand. This book was released on 2016-02-03 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes the current state of the know-how in the field of perovskite materials: synthesis, characterization, properties, and applications. Most chapters include a review on the actual knowledge and cutting-edge research results. Thus, this book is an essential source of reference for scientists with research fields in energy, physics, chemistry and materials. It is also a suitable reading material for graduate students.
Download or read book Novel Synthesis and Characterization of Nanostructured Materials written by Annelise Kopp Alves and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials have been largely studied in the last few years. They have great potential of applications in different fields such as materials science, physics, chemistry, biology, mechanic and medicine. Synthesis and characterization of nanostructured materials is a subject of great interest involving science, market, politicians, government and society. Based on results obtained by the authors' research group during the past decade, this book comes to present novel techniques to synthesize nanostructured materials and characterize their properties such as crystallinity and crystallite size, specific surface area, particle size, morphology and catalytic activity. This book is aimed for students, researchers and engineers searching for methodologies to obtain and characterize nanostructures in details.
