Download or read book Spillover and Mobility of Species on Solid Surfaces written by A. Guerrero-Ruiz and published by Elsevier. This book was released on 2001-08-02 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Spillover and Mobility of Species and Solid Surfaces" collects the papers which were presented at the Fifth International Conference Spillover, either as oral or poster contributions, as well as the summaries of the invited lectures. This congress and its publication in the Studies on Surface Science and Catalysis series follow the tradition of previous conferences on spillover, initiated in Lyon, 1983, and continued in Leipzig, 1989, Kyoto 1993 and Dalian, 1997. For the fifth conference, held in S.L. el Escorial (Madrid), the organising committee has attempted to compile representative contributions which illustrate the advances in understanding the spillover phenomenon since 1997. Spillover is a process taking place during the interface of gas reactant molecules (mainly hydrogen and oxygen) on solid surfaces. However, different contributions to the more general area of the chemistry at surfaces, related with the mobility and migration of species, diffusion through membranes, fuel cell catalysts, etc., have also been included. In fact the title of the present volume summarizes this attempt to extend the conference topics towards dynamics at surfaces.Among the 70 contributions received, the 56 accepted papers were selected on the basis of the reports of at least two international reviewers, according to standards comparable to those applied for other specialised journals. These papers are from 21 different countries.
Download or read book Hydrogen Effects in Catalysis written by Zoltan Paal and published by CRC Press. This book was released on 2020-09-10 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers hydrogen effects in catalysis in the broadest sense, from surface science to industrial applications. It draws the attention of the catalysis community to the importance of the phenomena of hydrogen effects both in the science and technology of catalysis.
Download or read book New Aspects of Spillover Effect in Catalysis written by K. Fujimoto and published by Elsevier. This book was released on 1993-08-23 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The spillover effect is one of the most promising factors in the enhancement of catalytic reaction rates. The spillover phenemenon was found in the 1960s by several research groups independently. It was defined at the previous International Symposium on Spillover as follows Spillover involves the transport of active species which are adsorbed or formed on a first phase onto another phase that does not adsorb or form the species under the same condition. However, this effect appears typically in the dynamic state, i.e., during reactions, which advance with a considerable reaction rate. This makes it difficult to elucidate the spillover effect through static methods. Therefore, more fundamental investigations are necessary. The development of alternative energy sources and protection of the environment demands highly selective and very rapid catalytic reactions at deviating conditions. To achieve these goals new concepts, such as the spillover effect, are needed. This proceedings book, which comprises 80 papers, contains methods for preparing catalysts in order to realize spillover effects and suggests the most probable mechanisms to explain these non-linear phenomena. It also contains studies on applications of the spillover effect to improve industrial catalytic processes.The book will be invaluable in the development of industrial catalysts and for solving energy and environmental protection problems.
Download or read book Kinetics of Heterogeneous Catalytic Reactions written by Michel Boudart and published by Princeton University Press. This book was released on 2014-07-14 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a critical account of the principles of the kinetics of heterogeneous catalytic reactions in the light of recent developments in surface science and catalysis science. Originally published in 1984. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Hydrogen Storage written by Jianjun Liu and published by BoD – Books on Demand. This book was released on 2012-09-05 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen, as an energy carrier, is widely regarded as a potential cost effective, renewable, and clean energy alternative to petroleum in order to mitigate energy shortage and global climate warming issues that the world is currently facing. However, storage of hydrogen is a substantial challenge, especially for applications in vehicles with fuel cells that use proton-exchange membranes (PEMs). Therefore, scientific community has started focusing their research activities on developing advanced hydrogen storage materials through nanotechnology. The book presents a wide variety of nanostructured materials used for application in hydrogen storage, covering chemical and physical storage approaches. The research topics include computational design, synthesis, processing, fabrication, characterization, properties and applications of nanomaterials in hydrogen storage systems.
Download or read book Hydrogen Storage Materials written by R. G. Barnes and published by . This book was released on 1988 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ames Laboratory, Iowa, USA
Download or read book Chemical Sensors written by Ghenadii Korotcenkov and published by Momentum Press. This book was released on 2012-06-15 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical sensors are integral to the automation of myriad industrial processes and everyday monitoring of such activities as public safety, engine performance, medical therapeutics, and many more. This 4 volume reference work covering simulation and modeling will serve as the perfect complement to Momentum Press's 6 volume reference works "Chemical Sensors: Fundamentals of Sensing Materials" and "Chemical Sensors: Comprehensive Sensor Technologies", which present detailed information related to materials, technologies, construction and application of various devices for chemical sensing. This 4 volume comprehensive reference work analyzes approaches used for computer simulation and modeling in various fields of chemical sensing and discusses various phenomena important for chemical sensing such as bulk and surface diffusion, adsorption, surface reactions, sintering, conductivity, mass transport, interphase interactions, etc. In this work it will be shown that theoretical modeling and simulation of the processes, being a basic for chemical sensors operation, could provide considerable progress in choosing both optimal materials and optimal configurations of sensing elements for using in chemical sensors. Each simulation and modeling volume in the present series reviews modeling principles and approaches peculiar to specific groups of materials and devices applied for chemical sensing. Volume 1: Microstructural Characterization and Modeling of Metal Oxides covers microstructural characterization of metal oxides using SEM, TEM, Raman spectroscopy and in-situ high temperature SEM, and multiscale atomistic simulation and modeling of metal oxides, including surface state, stability and metal oxide interactions with gas molecules, water and metals.
Download or read book Solvay Conference on Surface Science written by Frederick W. de Wette and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The articles collected in this volume give a broad overview of the current state of surface science. Pioneers in the field and researchers met together at this Solvay Conference to discuss important new developments in surface science, with an emphasis on the common area between solid state physics and physical chemistry. The contributions deal with the following subjects: structure of surfaces, surface science and catalysis, two-dimensional physics and phase transitions, scanning tunneling microscopy, surface scattering and surface dynamics, chemical reactions at surfaces, solid-solid interfaces and superlattices, and surface studies with synchrotron radiation. On each of these subjects an introductory review talk and a number of short research contributions are followed by extensive discussions, which appear in full in the text. This nineteenth Solvay Conference commemorates the 75th anniversary of the Solvay Institutes.
Download or read book Handbook of Nanotechnology Applications written by Kajornsak Faungnawakij and published by Elsevier. This book was released on 2020-10-22 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanotechnology Applications: Environment, Energy, Agriculture and Medicine presents a comprehensive overview on recent developments and prospects surrounding nanotechnology use in water/wastewater separation and purification, energy storage and conversion, agricultural and food process, and effective diagnoses and treatments in medical fields. The book includes detailed overviews of nanotechnology, including nanofiltration membrane for water/wastewater treatment, nanomedicine and nanosensor development for medical implementation, advanced nanomaterials of different structural dimensions (0D, 1D, 2D and 3D) for energy applications, as well as food and agricultural utilization. Other sections discuss the challenges of lab-based research transitioning towards practical industrial use. - Helps scientists and researchers quickly learn and understand the key role of nanotechnology in important industrial applications - Takes an interdisciplinary approach, demonstrating how nanotechnology is being used in a wide range of industry sectors - Outlines the role nanotechnology plays in creating safer, cheaper and more energy-efficient projects and devices
Download or read book Alkenes and Aromatics written by Peter Taylor and published by Royal Society of Chemistry. This book was released on 2002 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the reaction mechanisms associated with electrophilic attack on carbon-carbon double bonds.
Download or read book Gases Advances in Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 2282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gases: Advances in Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Gases. The editors have built Gases: Advances in Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Gases in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Gases: Advances in Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book New Dimensions in Production and Utilization of Hydrogen written by Sonil Nanda and published by Elsevier. This book was released on 2020-08-11 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gradual increase of population and the consequential rise in the energy demands in the recent years have led to the overwhelming use of fossil fuels. Hydrogen has recently gained substantial interest because of its outstanding features to be used as clean energy carrier and energy vector. Moreover, hydrogen appears to be an effective alternative to tackle the issues of energy security and greenhouse gas emissions given that it is widely recognized as a clean fuel with high energy capacity. Hydrogen can be produced by various techniques such as thermochemical, hydrothermal, electrochemical, electrolytic, biological and photocatalytic methods as well as hybrid systems. New Dimensions in Production and Utilization of Hydrogen emphasizes on the research, development and innovations in the production and utilization of hydrogen in the industrial biorefining, hydrotreating and hydrogenation technologies, fuel cells, aerospace sector, pharmaceuticals, metallurgy, as well as bio-oil upgrading. Moreover, the supply chain analysis, lifecycle assessment, techno-economic analysis, as well as strengths and threats of global hydrogen market are covered in the book. This book provides many significant insights and scientific findings of key technologies for hydrogen production, storage and emerging applications. The book serves as a reference material for chemical and biochemical engineers, mechanical engineers, physicists, chemists, biologists, biomedical scientists and scholars working in the field of sustainable energy and materials. - Discusses the efficient usage of hydrogen as standalone fuel or feedstock in downstream processing - Outlines key technologies for hydrogen production and their emerging applications - Includes innovative approaches to the research and applications of hydrogen, including hydrotreating technologies, fuel cell vehicles and green fuel synthesis, the aerospace sector, pharmaceuticals, carbon dioxide hydrogenation, and bio-oils upgrading - Serves as a reference for chemical, biochemical, and mechanical engineers, physicists, chemists, biologists, and biomedical scientists working in sustainable energy and materials
Download or read book Science and Technology in Catalysis written by Masakazu Anpo and published by Gulf Professional Publishing. This book was released on 2003-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.
Download or read book Supported Metal Single Atom Catalysis written by Philippe Serp and published by John Wiley & Sons. This book was released on 2022-02-09 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: b”Supported Metal Single Atom CatalysisCovers all key aspects of supported metal single atom catalysts, an invaluable resource for academic researchers and industry professionals alike Single atom catalysis is one of the most innovative and dynamic research areas in catalysis science. Supported metal catalysts are used extensively across the chemical industry, ranging from fine and bulk chemical production to petrochemicals. Single atom catalysts (SACs) combine the advantages of both homogeneous and heterogeneous catalysts such as catalyst stability, activity, and high dispersion of the active phase. Supported Metal Single Atom Catalysis provides an authoritative and up-to-date overview of the emerging field, covering the synthesis, preparation, characterization, modeling, and applications of SACs. This comprehensive volume introduces the basic principles of single atom catalysis, describes metal oxide and carbon support materials for SAC preparation, presents characterization techniques and theoretical calculations, and discusses SACs in areas including selective hydrogenation, oxidation reactions, activation of small molecules, C-C bond formation, and biomedical applications. Highlights the activity, selectivity, and stability advantages of supported metal SACs compared to other heterogeneous catalysts Covers applications of SACs in thermal catalysis, electrocatalysis, and photocatalysis Includes chapters on single atom alloys and supported double and triple metal atom catalysts Discusses the prospects, challenges, and potential industrial applications of SACs Supported Metal Single Atom Catalysis is an indispensable reference for all those working in the fields of catalysis, solid-state chemistry, materials science, and spectroscopy, including catalytic chemists, organic chemists, electrochemists, theoretical chemists, and industrial chemists.
Download or read book Zeolites and Zeolite like Materials written by Bert Sels and published by Elsevier. This book was released on 2016-07-29 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeolites and Zeolite-like Materials offers a comprehensive and up-to-date review of the important areas of zeolite synthesis, characterization, and applications. Its chapters are written in an educational, easy-to-understand format for a generation of young zeolite chemists, especially those who are just starting research on the topic and need a reference that not only reflects the current state of zeolite research, but also identifies gaps and opportunities. The book demonstrates various applications of zeolites in heterogeneous catalysis and biomass conversion and identifies the endless possibilities that exist for this class of materials, their structures, functions, and future applications. In addition, it demonstrates that zeolite-like materials should be regarded as a living body developing towards new modern applications, thereby responding to the needs of modern technology challenges, including biomass conversion, medicine, laser techniques, and nanomaterial design, etc. The book will be of interest not only to zeolite-focused researchers, but also to a broad scientific and non-scientific audience. - Provides a comprehensive review of the literature pertaining to zeolites and zeolite-like materials since 2000 - Covers the chemistry of novel zeolite-like materials such as Metal-Organic Frameworks (MOFs), Covalent Organic Frameworks (COFs), hierarchical zeolite materials, new mesoporous and composite zeolite-like micro/mesoporous materials - Presents essential information of the new zeolite-like structures, with a balanced coverage of the most important areas of the zeolite research (synthesis, characterization, adsorption, catalysis, new applications of zeolites and zeolite-like materials) - Contains chapters prepared by known specialists who are members of the International Zeolite Association
Download or read book Nanomaterials for Hydrogen Storage Applications written by Fatih Şen and published by Elsevier. This book was released on 2020-09-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Hydrogen Storage Applications introduces nanomaterials and nanocomposites manufacturing and design for hydrogen storage applications. The book covers the manufacturing, design, characterization techniques and hydrogen storage applications of a range of nanomaterials. It outlines fundamental characterization techniques for nanocomposites to establish their suitability for hydrogen storage applications. Offering a sound knowledge of hydrogen storage application of nanocomposites, this book is an important resource for both materials scientists and engineers who are seeking to understand how nanomaterials can be used to create more efficient energy storage solutions. - Assesses the characterization, design, manufacture and application of different types of nanomaterials for hydrogen storage - Outlines the major challenges of using nanomaterials in hydrogen storage - Discusses how the use of nanotechnology is helping engineers create more effective hydrogen storage systems
Download or read book Comprehensive Energy Systems written by Ibrahim Dincer and published by Elsevier. This book was released on 2018-02-07 with total page 5543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Energy Systems, Seven Volume Set provides a unified source of information covering the entire spectrum of energy, one of the most significant issues humanity has to face. This comprehensive book describes traditional and novel energy systems, from single generation to multi-generation, also covering theory and applications. In addition, it also presents high-level coverage on energy policies, strategies, environmental impacts and sustainable development. No other published work covers such breadth of topics in similar depth. High-level sections include Energy Fundamentals, Energy Materials, Energy Production, Energy Conversion, and Energy Management. Offers the most comprehensive resource available on the topic of energy systems Presents an authoritative resource authored and edited by leading experts in the field Consolidates information currently scattered in publications from different research fields (engineering as well as physics, chemistry, environmental sciences and economics), thus ensuring a common standard and language
