Download or read book Hydrogen Passivation and Laser Doping for Silicon Solar Cells written by Brett Hallam and published by Energy Engineering. This book was released on 2021-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic electricity generation is a rapidly growing industry, and a key pillar of a decarbonized energy system. Lasers are used to dope the semiconductor layers in solar cells, and it is necessary to passivate these laser-induced structures to prevent premature charge carrier recombination. This book conveys passivation techniques.
Download or read book High Efficiency Silicon Solar Cells written by Martin A. Green and published by Trans Tech Publications Ltd. This book was released on 1987-01-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early chapters comprehensively review the optical and transport properties of silicon. Light trapping is described in detail. Limits on the efficiency of silicon cells are discussed as well as material requirements necessary to approach these limits. The status of current approaches to passifying surfaces, contacts and bulk regions is reviewed. The final section of the book describes the most practical approaches to the fabrication of high-efficiency cells capable of meeting the efficiency targets for both concentrated and non-concentrated sunlight, including a discussion of design and processing approaches for non-crystalline silicon.
Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of “conventional” solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the ‘hero’ of this book; the heterojunction solar cell.
Download or read book Surface Passivation of Industrial Crystalline Silicon Solar Cells written by Joachim John and published by Institution of Engineering and Technology. This book was released on 2018-11-15 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface passivation of silicon solar cells describes a technology for preventing electrons and holes to recombine prematurely with one another on the wafer surface. It increases the cell's energy conversion efficiencies and thus reduces the cost per kWh generated by a PV system.
Download or read book Advances in Green Energies and Materials Technology written by Younes Chiba and published by Springer Nature. This book was released on 2021-06-09 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected articles from the Algerian Symposium on Renewable Energy and Materials (ASREM-2020) held at Médéa, Algeria. It highlights the latest advances in the field of green energies and material technology with specific accentuation on numerical plans and recent methodologies designed to solve engineering problems. It includes mathematical models and experimental measurements to study different problems in renewable energy and materials characterization, with contributions from experts in both academia and industry, and presents a platform to further collaborations in this important area.
Download or read book Solar Energy Capture Materials written by Elizabeth A Gibson and published by Royal Society of Chemistry. This book was released on 2019-08-19 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy is an important area of contemporary research, with clear societal benefits. It is a fast-developing and application-driven research area, with chemistry leading the discovery of new solids, which are then studied by physicists and materials scientists. Solar Energy Capture Materials introduces a range of the different inorganic materials used, with an emphasis on how solid-state chemistry allows development of new functional solids for energy applications. Dedicated chapters cover silicon-based photovoltaic devices, compound semiconductor-based solar cells, dye-sensitized solar cells (DSC), solution processed solar cells and emerging materials. Edited and written by world-renowned scientists, this book will provide a comprehensive introduction for advanced undergraduates, postgraduates and researchers wishing to learn about the topic.
Download or read book Thin Film Silicon Solar Cells written by Arvind Shah and published by EPFL Press. This book was released on 2010-08-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.
Download or read book Handbook of Photovoltaic Silicon written by Deren Yang and published by Springer. This book was released on 2019-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of sun light is one of the hottest topics in sustainable energy research. To efficiently convert sun power into a reliable energy – electricity – for consumption and storage, silicon and its derivatives have been widely studied and applied in solar cell systems. This handbook covers the photovoltaics of silicon materials and devices, providing a comprehensive summary of the state of the art of photovoltaic silicon sciences and technologies. This work is divided into various areas including but not limited to fundamental principles, design methodologies, wafering techniques/fabrications, characterizations, applications, current research trends and challenges. It offers the most updated and self-explanatory reference to all levels of students and acts as a quick reference to the experts from the fields of chemistry, material science, physics, chemical engineering, electrical engineering, solar energy, etc..
Download or read book Printed Electronics written by Ilgu Yun and published by Intechopen. This book was released on 2016-09-28 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of latest research developments on the printed electronics from the material-related various processes to the interdisciplinary device applications. It is a promising new research area that has received a lot of highlights for low-cost and high-volume manufacturing in recent years. Here, you will find interesting reports on currently progressed science- and technology-related materials, fabrication processes, and various recent applications, including organic/inorganic semiconductor, textile, and biomedical engineering for the printed electronics. I hope that the book will provide the fundamental backgrounds of printed electronics to lead you for the creation of new research field and further promotion of future technology of the printed electronics.
Download or read book Nanostructured Solar Cells written by Narottam Das and published by BoD – Books on Demand. This book was released on 2017-02-22 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured solar cells are very important in renewable energy sector as well as in environmental aspects, because it is environment friendly. The nano-grating structures (such as triangular or conical shaped) have a gradual change in refractive index which acts as a multilayer antireflective coating that is leading to reduced light reflection losses over broadband ranges of wavelength and angle of incidence. There are different types of losses in solar cells that always reduce the conversion efficiency, but the light reflection loss is the most important factor that decreases the conversion efficiency of solar cells significantly. The antireflective coating is an optical coating which is applied to the surface of lenses or any optical devices to reduce the light reflection losses. This coating assists for the light trapping capturing capacity or improves the efficiency of optical devices, such as lenses or solar cells. Hence, the multilayer antireflective coatings can reduce the light reflection losses and increases the conversion efficiency of nanostructured solar cells.
Download or read book Solar Cells written by Tom Markvart and published by Academic Press. This book was released on 2012-10-26 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enormous leaps forward in the efficiency and the economy of solar cells are being made at a furious pace. New materials and manufacturing processes have opened up new realms of possibility for the application of solar cells. Crystalline silicon cells are increasingly making way for thin film cells, which are spawning experimentation with third-generation high-efficiency multijunction cells, carbon-nanotube based cells, UV light for voltage enhancement, and the use of the infrared spectrum for night-time operation, to name only a few recent advances. This thoroughly updated new edition of Markvart and Castaner's Solar Cells, extracted from their industry standard Practical Handbook of Photovoltaics, is the definitive reference covering the science and operation, materials and manufacture of solar cells. It is essential reading for engineers, installers, designers, and policy-makers who need to understand the science behind the solar cells of today, and tomorrow, in order to take solar energy to the next level. A thorough update to the definitive reference to solar cells, created by a cast of international experts from industry and academia to ensure the highest quality information from multiple perspectives Covers the whole spectrum of solar cell information, from basic scientific background, to the latest advances in materials, to manufacturing issues, to testing and calibration. Case studies, practical examples and reports on the latest advances take the new edition of this amazing resource beyond a simple amalgamation of a vast amount of knowledge, into the realm of real world applications
Download or read book Lifetime Spectroscopy written by Stefan Rein and published by Springer Science & Business Media. This book was released on 2005-11-25 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lifetime spectroscopy is one of the most sensitive diagnostic tools for the identification and analysis of impurities in semiconductors. Since it is based on the recombination process, it provides insight into precisely those defects that are relevant to semiconductor devices such as solar cells. This book introduces a transparent modeling procedure that allows a detailed theoretical evaluation of the spectroscopic potential of the different lifetime spectroscopic techniques. The various theoretical predictions are verified experimentally with the context of a comprehensive study on different metal impurities. The quality and consistency of the spectroscopic results, as explained here, confirms the excellent performance of lifetime spectroscopy.
Download or read book Photovoltaic Solar Energy written by Wilfried van Sark and published by John Wiley & Sons. This book was released on 2024-07-29 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic Solar Energy Thoroughly updated overview of photovoltaic technology, from materials to modules and systems Volume 2 of Photovoltaic Solar Energy provides fundamental and contemporary knowledge about various photovoltaic technologies in the framework of material science, device physics of solar cells, chemistry for manufacturing, engineering of PV modules, and the design aspects of photovoltaic applications, with the aim of informing the reader about the basic knowledge of each aspect of photovoltaic technologies and applications in the context of the most recent advances in science and engineering. The text is written by leading specialists for each topic in a concise manner and includes the most recent references for deeper study. Moreover, the book gives insights into possible future developments in the field of photovoltaics. The book builds on the success of Volume 1 of Photovoltaic Solar Energy, which was published by Wiley in January 2017. As science and technology is progressing fast in some areas of photovoltaics, several topics needed to be readdressed. Volume 2 also covers some basic aspects of the subject that were not addressed in Volume 1. Sample topics covered in Photovoltaic Solar Energy include: Solar Irradiance Resources Crystalline Silicon Technologies (Cz Ingots, TOPCon, Heterojunction, Passivating contacts, Hydrogenation and Carrier Induced Degradation) Perovskite and Tandem solar cells Characterization and Measurements PV Modules PV Systems and Applications (integration in buildings, agriculture, water, vehicles) Sustainability Providing comprehensive coverage of the subject, Photovoltaic Solar Energy is an essential resource for undergraduate and graduate students in science or engineering, young professionals in PV research or the PV industry, professors, teachers, and PV specialists who want to receive updated information. A scientific or engineering degree is a prerequisite.
Download or read book Solar Energy written by Christoph Richter and published by Springer. This book was released on 2012-11-29 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering some 30 entries from the Encyclopedia of Sustainability Science and Technology, this book presents fundamental principles and technologies for sustainably harnessing solar energy. Covers photovoltaics, solar thermal energy, solar radiation and more.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals Of Solar Cells written by Alan Fahrenbruch and published by Elsevier. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Solar Cells: Photovoltaic Solar Energy Conversion provides an introduction to the fundamental physical principles of solar cells. It aims to promote the expansion of solar photovoltaics from relatively small and specialized use to a large-scale contribution to energy supply. The book begins with a review of basic concepts such as the source of energy, the role of photovoltaic conversion, the development of photovoltaic cells, and sequence of phenomena involved in solar power generation. This is followed by separate chapters on each of the processes that take place in solar cell. These include solar input; properties of semiconductors; recombination and the flow of photogenerated carriers; charge separation and the characteristics of junction barriers; and calculation of solar efficiency. Subsequent chapters deal with the operation of specific solar cell devices such as a single-crystal homojunction (Si); a single-crystal-heterojunction/buried-homojunction (AlGaAs/GaAs); and a polycrystalline, thin-film cell (CuxS/CdS). This book is intended for upper-level graduate students who have a reasonably good understanding of solid state physics and for scientists and engineers involved in research and development of solar cells.
Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
