Download or read book Reaction Kinetics and the Development and Operation of Catalytic Processes written by G.F. Froment and published by Elsevier. This book was released on 2001-04-03 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reaction Kinetics and the Development and Operation of Catalytic Processes is a trendsetter. The Keynote Lectures have been authored by top scientists and cover a broad range of topics like fundamental aspects of surface chemistry, in particular dynamics and spillover, the modeling of reaction mechanisms, with special focus on the importance of transient experimentation and the application of kinetics in reactor design. Fundamental and applied kinetic studies are well represented. More than half of these deal with transient kinetics, a new trend made possible by recent sophisticated experimental equipment and the awareness that transient experimentation provides more information and insight into the microphenomena occurring on the catalyst surface than steady state techniques. The trend is not limited to purely kinetic studies since the great majority of the papers dealing with reactors also focus on transients and even deliberate transient operation. It is to be expected that this trend will continue and amplify as the community becomes more aware of the predictive potential of fundamental kinetics when combined with detailed realistic modeling of the reactor operation.

Download or read book Preparation of Catalysts III written by G. Poncelet and published by Elsevier. This book was released on 1983-04-01 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies in Surface Science and Catalysis is one of the oldest and most cited series in the field. It offers a privileged view of the topic covering the theory, applications and engineering of all topics of catalysis, including Heterogeneous-Homogeneous, Biocatalysis and Catalysis for Polymerization. This volume provides an invaluable source of information for academics and industrialists as well as graduate students.

Download or read book Spillover and Mobility of Species on Solid Surfaces written by A. Guerrero-Ruiz and published by Elsevier. This book was released on 2001-08-02 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Spillover and Mobility of Species and Solid Surfaces" collects the papers which were presented at the Fifth International Conference Spillover, either as oral or poster contributions, as well as the summaries of the invited lectures. This congress and its publication in the Studies on Surface Science and Catalysis series follow the tradition of previous conferences on spillover, initiated in Lyon, 1983, and continued in Leipzig, 1989, Kyoto 1993 and Dalian, 1997. For the fifth conference, held in S.L. el Escorial (Madrid), the organising committee has attempted to compile representative contributions which illustrate the advances in understanding the spillover phenomenon since 1997. Spillover is a process taking place during the interface of gas reactant molecules (mainly hydrogen and oxygen) on solid surfaces. However, different contributions to the more general area of the chemistry at surfaces, related with the mobility and migration of species, diffusion through membranes, fuel cell catalysts, etc., have also been included. In fact the title of the present volume summarizes this attempt to extend the conference topics towards dynamics at surfaces.Among the 70 contributions received, the 56 accepted papers were selected on the basis of the reports of at least two international reviewers, according to standards comparable to those applied for other specialised journals. These papers are from 21 different countries.

Download or read book Coal Science written by Martin L. Gorbaty and published by Academic Press. This book was released on 2013-10-22 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal Science, Volume 3 presents and evaluates selected fundamental scientific areas on coal structure, reactivity, and utilization. This book describes the organic geochemistry of coal, role of oxygen functionality in coal and coal liquids reactivity, chemistry of hydrocarbon syntheses from carbon monoxide and hydrogen, and chemistry of coal in carbon monoxide/water systems. Other topics discussed include intermediates and mechanisms of the FTS of hydrocarbons; synthesis of oxygenates; and structural features of vitrinite macerals. The molecular weight determination for coal derivatives; thermal reactions of oxygen compounds; and alternative methods for removing oxygen compounds from coal-derived liquids are also elaborated. This publication likewise covers the aqueous coal conversions and conversion mechanism. This volume serves as a valuable source of information and guide to scientists and researchers interested in the coal literature.

Download or read book Introduction to Petroleum Biotechnology written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2017-12-11 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Petroleum Biotechnology introduces the petroleum engineer to biotechnology, bringing together the various biotechnology methods that are applied to recovery, refining and remediation in the uses of petroleum and petroleum products. A significant amount of petroleum is undiscoverable in reservoirs today using conventional and secondary methods. This reference explains how microbial enhanced oil recovery is aiding to produce more economical and environmentally-friendly metabolic events that lead to improved oil recovery. Meanwhile, in the downstream side of the industry, petroleum refining operators are facing the highest levels of environmental regulations while struggling to process more of the heavier crude oils since conventional physical and chemical refining techniques may not be applicable to heavier crudes. This reference proposes to the engineer and refining manager the concepts of bio-refining applications to not only render heavier crudes as lighter crudes through microbial degradation, but also through biodenitrogenation, biodemetallization and biodesulfurization, making more petroleum derivatives purified and upgraded without the release of more pollutants. Equipped for both upstream and downstream to learn the basics, this book is a necessary primer for today's petroleum engineer. - Presents the fundamentals behind petroleum biotechnology for both upstream and downstream oil and gas operations - Provides the latest technology in reservoir recovery using microbial enhanced oil recovery methods - Helps readers gain insight into the current and future application of using biotechnology as a refining and fuel blending method for heavy oil and tar sands

Download or read book Mesoporous Molecular Sieves 1998 written by L. Bonneviot and published by Elsevier. This book was released on 1998-07-08 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The original properties of mesoporous molecular sieves are so unique that the design of most existing catalysts could be reconsidered. It might indeed be of interest to introduce MMS either as a support or as the active phase, merely on the basis of their high surface areas, narrow pore size distribution and flexibility in composition. The recent literature provides examples of MMS based catalysts of many types such as acid-base solids, supported metals and supported oxides, mixed oxides, anchored complexes and clusters, grafted organic functional groups and others. Examples of all these developments are documented in the present proceedings including some spectacular new proposals. The new metallic (Pt) mesophases are specially worth mentioning because they represent a new approach to producing non-supported highly dispersed metals.In these proceedings the reader will find feature articles and regular papers from many worldwide groups, covering all aspects of synthesis, physical characterization and catalytic reactivity of MMS and their chemically modified forms. It is actually remarkable that this recent development brought together an even broader spectrum of scientists from traditionally unrelated fields such as those of liquid crystals, surfactants, sol-gels, amorphous oxides and mixed oxides, solid state, adsorbents and heterogeneous catalysts. Obviously, this is a fast-growing research area which triggers the imagination and creativity at the cross-road between material design, molecular surface tailoring and catalytic applications.

Download or read book Advances in Clean Hydrocarbon Fuel Processing written by M. Rashid Khan and published by Elsevier. This book was released on 2011-09-23 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional coal, oil and gas resources used worldwide for power production and transportation are limited and unsustainable. Research and development into clean, alternative hydrocarbon fuels is therefore aimed at improving fuel security through exploring new feedstock conversion techniques, improving production efficiency and reducing environmental impacts.Advances in clean hydrocarbon fuel processing provides a comprehensive and systematic reference on the range of alternative conversion processes and technologies.Following introductory overviews of the feedstocks, environmental issues and life cycle assessment for alternative hydrocarbon fuel processing, sections go on to review solid, liquid and gaseous fuel conversion. Solid fuel coverage includes reviews of liquefaction, gasification, pyrolysis and biomass catalysis. Liquid fuel coverage includes reviews of sulfur removal, partial oxidation and hydroconversion. Gaseous fuel coverage includes reviews of Fischer-Tropsch synthesis, methanol and dimethyl ether production, water-gas shift technology and natural gas hydrate conversion. The final section examines environmental degradation issues in fuel processing plants as well as automation, advanced process control and process modelling techniques for plant optimisationWritten by an international team of expert contributors, Advances in clean hydrocarbon fuel processing provides a valuable reference for fuel processing engineers, industrial petrochemists and energy professionals, as well as for researchers and academics in this field. - A comprehensive reference on the range of alternative conversion processes and technologies - Provides an overview of the feedstocks, environmental issues and life cycle assessments for alternative hydrocarbon fuel processing, including a review of the key issues in solid, liquid and gaseous fuel conversion - Examines automation, advanced process control and process modelling techniques for plant optimisation

Download or read book Science and Technology in Catalysis written by Masakazu Anpo and published by Gulf Professional Publishing. This book was released on 2003-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.