Download or read book Hydro thermo mechanical Coupled Phenomena in Geothermal Exploitation written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy demand and production is a problem that countries around the world are facing nowadays, because meeting energy demands is necessary to improving quality of life. Geothermal energy is envisioned as a part of the integral solution to meet demand. Colombia, as with other countries, has the possibility of improving its base load capacity through geothermal resources. They have been found in several places where they can be developed and harnessed. Other countries with similar tectonic or volcanic activity can reach this resource. Because of the depths and the target geothermal gradient, the environment of an enhanced geothermal system (EGS) is found at high pressures and high temperatures. For this reason, mathematical models are necessary under these special pressures and temperatures conditions. Additionally analytical and numerical forecasts and predictions can become more accurate by using actual laws of behavior that consider temperature and pressure. Mechanical hydraulic fracturing laws can be improved, and current laws that explain general mechanical behavior do not describe all situations adequately. Indeed, coupled analyses can included these kinds of laws, which will improve general predictions. Numerical simulation is a powerful tool in the case of EGS because of the various scales of the problems, the localization, and the complexity of the coupled phenomena. Further research can be done that focuses on additional coupled processes, such as mechanical or chemical interactions. Moreover, numerical simulation tools can be used for forecasting and well management practices. They will improve the economic success of the geothermal project.

Download or read book Thermo Hydro Mechanical Coupling in Fractured Rock written by Hans-Joachim Kümpel and published by Springer Science & Business Media. This book was released on 2003-03-21 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The supply and protection of groundwater, the production of hydrocarbon reservoirs, land subsidence in coastal areas, exploitation of geothermal energy, the long-term disposal of critical wastes ... What do these issues have in common besides their high socio-economic impact? They are all closely related to fluid flow in porous and/or fractured rock. As the conditions of fluid flow in many cases depend on the mechanical behavior of rocks, coupling between the liquid phase and the rock matrix can generally not be neglected. For the past five years or so, studies of rock physics and rock mechanics linked to coupling phenomena have received increased attention. In recognition of this, a Euroconference on thermo-hydro-mechanical coupling in fractured rock was held at Bad Honnef, Germany, in November 2000. Most of the twenty papers collected in this volume were presented at this meeting. The contributions lead to deeper insight in processes where such coupling is relevant.

Download or read book Thermo Hydro Mechanical THM coupled simulations of innovative enhanced geothermal systems for heat and electricity production as well as energy storage written by Muhammad Haris and published by Cuvillier Verlag. This book was released on 2022-08-05 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced geothermal systems (EGSs) evolved from the hot dry rock can provide a significant amount of energy while shifting towards negligible carbon emission. In order to investigate some important issues related to EGS, several scenarios have been analyzed using powerful numerical tools (FLAC3Dplus and TOUGH2MP-TMVOC). While conducting multiple hydraulic fracturing, it is observed that the newly created successive fracture’s configuration highly depends on the previous one under the influence of stress shadow. Therefore, the assumption of using similar multiple fracture geometries and shapes for energy exploitation may lead to erroneous estimations. A case study has been performed further using the engineering data of the GeneSys project in the North German Basin. Numerous scenarios have been investigated, and the optimized EGS project is proposed, whose installed power capacity of one side of the injection well declines from 7.17 MW to 5.08 MW over 30 years. Moreover, the Levelized cost of electricity is calculated at 5.46 c$/kWh, which is quite economical compared to the current electricity price. Finally, an innovative concept of regenerative EGS is proposed by storing surplus renewable energy in multiple hydraulic fractures that can reduce the reservoir temperature reduction rate. The results of continuous injection/production cycles depicted that a regenerative EGS could be achieved in reality.

Download or read book Flow and Heat Transfer in Geothermal Systems written by Aniko Toth and published by Elsevier. This book was released on 2016-10-11 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow and Heat Transfer in Geothermal Systems: Basic Equations for Description and Modeling Geothermal Phenomena and Technologies is the ideal reference for research in geothermal systems and alternative energy sources. Written for a wide variety of users, including geologists, geophysicists, hydro-geologists, and engineers, it offers a practical framework for the application of heat and flow transport theory. Authored by two of the world’s foremost geothermal systems experts, whose combined careers span more than 50 years, this text is a one-stop resource for geothermal system theory and application. It will help geoscientists and engineers navigate the wealth of new research that has emerged on the topic in recent years. Presents a practical and immediately implementable framework for understanding and applying heat and flow transport theory Features equations for modelling geothermal phenomena and technologies in full detail Provides an ideal text for applications in both geophysics and engineering

Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.

Download or read book Renewable Energy Resources written by John Twidell and published by Taylor & Francis. This book was released on 2006-01-16 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the years between the first and this second edition, renewable energy has come of age; it makes good sense, good government and good business. This book considers the unchanging principles of renewable energy technologies alongside modern application and case studies. In this second edition, the presentation of the fundamentals has been improved throughout, and chapters on economics and institutional factors have been added. Likewise, sections on environmental impact have been added to each technology chapter. Renewable Energy Resources supports multi-disciplinary.

Download or read book The Combined Finite Discrete Element Method written by Antonio A. Munjiza and published by John Wiley & Sons. This book was released on 2004-04-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.

Download or read book FEFLOW written by Hans-Jörg G. Diersch and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEFLOW is an acronym of Finite Element subsurface FLOW simulation system and solves the governing flow, mass and heat transport equations in porous and fractured media by a multidimensional finite element method for complex geometric and parametric situations including variable fluid density, variable saturation, free surface(s), multispecies reaction kinetics, non-isothermal flow and multidiffusive effects. FEFLOW comprises theoretical work, modeling experiences and simulation practice from a period of about 40 years. In this light, the main objective of the present book is to share this achieved level of modeling with all required details of the physical and numerical background with the reader. The book is intended to put advanced theoretical and numerical methods into the hands of modeling practitioners and scientists. It starts with a more general theory for all relevant flow and transport phenomena on the basis of the continuum approach, systematically develops the basic framework for important classes of problems (e.g., multiphase/multispecies non-isothermal flow and transport phenomena, discrete features, aquifer-averaged equations, geothermal processes), introduces finite-element techniques for solving the basic balance equations, in detail discusses advanced numerical algorithms for the resulting nonlinear and linear problems and completes with a number of benchmarks, applications and exercises to illustrate the different types of problems and ways to tackle them successfully (e.g., flow and seepage problems, unsaturated-saturated flow, advective-diffusion transport, saltwater intrusion, geothermal and thermohaline flow).

Download or read book Volcanic Unrest written by Joachim Gottsmann and published by Springer. This book was released on 2018-12-18 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the findings of the VUELCO project, a multi-disciplinary and cross-boundary research funded by the European Commission's 7th framework program. It comprises four broad topics: 1. The global significance of volcanic unrest 2. Geophysical and geochemical fingerprints of unrest and precursory activity 3. Magma dynamics leading to unrest phenomena 4. Bridging the gap between science and decision-making Volcanic unrest is a complex multi-hazard phenomenon. The fact that unrest may, or may not lead to an imminent eruption contributes significant uncertainty to short-term volcanic hazard and risk assessment. Although it is reasonable to assume that all eruptions are associated with precursory activity of some sort, the understanding of the causative links between subsurface processes, resulting unrest signals and imminent eruption is incomplete. When a volcano evolves from dormancy into a phase of unrest, important scientific, political and social questions need to be addressed. This book is aimed at graduate students, researchers of volcanic phenomena, professionals in volcanic hazard and risk assessment, observatory personnel, as well as emergency managers who wish to learn about the complex nature of volcanic unrest and how to utilize new findings to deal with unrest phenomena at scientific and emergency managing levels. This book is open access under a CC BY license.

Download or read book Thermo hydro mechanical coupled analysis in low perpeability media written by Marcelo Sánchez Castilla and published by . This book was released on 2004 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 4th International Conference on Sustainability in Civil Engineering written by Tung Nguyen-Xuan and published by Springer Nature. This book was released on 2023-08-12 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 4th International Conference on Sustainability in Civil Engineering, ICSCE 2022, held on November 25–27, 2022, in Hanoi, Vietnam. It presents the expertise of scientists and engineers in academia and industry in the field of bridge and highway engineering, construction materials, environmental engineering, engineering in Industry 4.0, geotechnical engineering, structural damage detection and health monitoring, structural engineering, geographic information system engineering, traffic, transportation and logistics engineering, and water resources, estuary, and coastal engineering.

Download or read book Blue Book on Geothermal Resources written by and published by . This book was released on 1999 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Frontiers of Discontinuous Numerical Methods and Practical Simulations in Engineering and Disaster Prevention written by Guangqi Chen and published by CRC Press. This book was released on 2013-08-12 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of large deformation, rigid body movement and strain or stress for discontinuous materials is often required for project designs and plans in the fields of engineering and disaster prevention. Many numerical simulation and analysis methods have been developed for the requirement from science and technology people since 1970s. Among them, D

Download or read book Geothermal Reservoir Engineering written by Malcolm Alister Grant and published by Academic Press. This book was released on 2011-04-01 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: As nations alike struggle to diversify and secure their power portfolios, geothermal energy, the essentially limitless heat emanating from the earth itself, is being harnessed at an unprecedented rate. For the last 25 years, engineers around the world tasked with taming this raw power have used Geothermal Reservoir Engineering as both a training manual and a professional reference. This long-awaited second edition of Geothermal Reservoir Engineering is a practical guide to the issues and tasks geothermal engineers encounter in the course of their daily jobs. The book focuses particularly on the evaluation of potential sites and provides detailed guidance on the field management of the power plants built on them. With over 100 pages of new material informed by the breakthroughs of the last 25 years, Geothermal Reservoir Engineering remains the only training tool and professional reference dedicated to advising both new and experienced geothermal reservoir engineers. The only resource available to help geothermal professionals make smart choices in field site selection and reservoir management Practical focus eschews theory and basics- getting right to the heart of the important issues encountered in the field Updates include coverage of advances in EGS (enhanced geothermal systems), well stimulation, well modeling, extensive field histories and preparing data for reservoir simulation Case studies provide cautionary tales and best practices that can only be imparted by a seasoned expert

Download or read book Geothermal Energy written by Mary H. Dickson and published by Routledge. This book was released on 2013-07-04 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy refers to the heat contained within the Earth that generates geological phenomena on a planetary scale. Today, this term is often associated with man's efforts to tap into this vast energy source. Geothermal Energy: utilization and technology is a detailed reference text, describing the various methods and technologies used to exploit the earth's heat. Beginning with an overview of geothermal energy and the state of the art, leading international experts in the field cover the main applications of geothermal energy, including: electricity generation space and district heating space cooling greenhouse heating aquaculture industrial applications The final third of the book focuses upon environmental impact and economic, financial and legal considerations, providing a comprehensive review of these topics. Each chapter is written by a different author, but to a set style, beginning with aims and objectives and ending with references, self-assessment questions and answers. Case studies are included throughout. Whilst written primarily for professionals and students interested in learning more about geothermal energy, the book also offers those new to the field and the general geothermal community an opportunity to understand and review the potential of this exciting alternative energy source. Published with UNESCO

Download or read book Heat Transfer Investigations for Optimal Harnessing of Enhanced Geothermal Systems written by Esuru Rita Okoroafor and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced Geothermal Systems (EGS) offer the opportunity of exploiting the vast energy resources contained in hot impermeable rocks. In such rocks, the natural flow capacity of the system may not be sufficient to support adequate geothermal applications until it is enhanced by opening up existing fractures and propagating new fractures. Cold fluid is injected into the reservoir to exploit the energy resource, whose permeability has been enhanced. The increased permeability allows the fluid to circulate through the opened fractures to production or extraction well(s), thereby capturing and transporting the heat contained in the hot impermeable rock for power generation. Accurate prediction of the thermal performance of EGS depends on an understanding of how the heat transport is affected by the presence of the fracture(s) -- the primary flow conduit of EGS. These fractures may have aperture variability that could create channels and alter flow paths, affecting the availability of surface area for heat transfer. The overall goal of this study was to understand the fracture topology, investigate how it can impact flow and heat transport, and demonstrate ways Enhanced Geothermal Systems can be harnessed to optimize thermal performance. To achieve the goal of this study, a systematic fracture characterization approach was used, and numerical simulation models were used to study the physical processes that govern the interaction between the fluid and the rock during heat extraction from Enhanced Geothermal Systems. Using variogram modeling and Sequential Gaussian Simulation method, fracture apertures representing actual fractures were generated for lab-scale and field-scale investigations. Fracture characterization metrics such as the Joint Roughness Coefficient (JRC) and Hurst exponent were used in analyzing the data. Geometric anisotropy was a vital character of the generated fracture aperture distributions, which was seen to originate from the process of shearing or slip. Flow and heat transport relative to the direction of fracture shear was studied, with the perpendicular flow configuration being perpendicular to the direction of fracture shear. In contrast, the parallel flow configuration had flow in the same direction as the fracture shear direction. It was demonstrated in this study that the flow wetted surface area had a direct and significant contribution to the amount of heat extracted. For the lab-scale fractures, the JRC confirmed geometric anisotropy of the fracture aperture and was seen to have a direct correlation with the flow contact area. The lower the difference in JRC values between the perpendicular and parallel flow configurations, the more flow contact area expected in the perpendicular flow direction, which will lead to more heat extracted from the rock. From the variogram model parameters, it was deduced that high geometric anisotropy results in high differences in thermal drawdown and consequently a high difference in energy extracted. The thermal performance appeared to be better in the perpendicular flow configuration with a ratio of 70:30 for the lab-scale fractures. For the field-scale fractures, it was seen that most of the fracture aperture distributions with a geometric anisotropy ratio of 2 had Hurst exponents of fracture surface aperture variability found in nature. For all the fracture aperture distributions analyzed for the field scale, the perpendicular flow configuration resulted in better thermal performance than the parallel flow configuration with a ratio of 58:42. Furthermore, for the geometric anisotropy ratio of 2, the ratio was 70:30. The perpendicular flow configuration had the injected fluid move through tortuous flow paths. These tortuous flow paths contributed to more fracture surface area being contacted by the flowing fluid, leading to an improved thermal performance in that flow configuration. Throughout this study, temperature-dependent viscosity was used. However, a section of this study investigated the impact of using a constant viscosity in the thermohydraulic model. It was seen that for fractures with smooth, uniform apertures, for all temperature ranges and at the operating conditions being modeled, there was no significant difference between using a constant viscosity or a temperature-dependent viscosity in modeling an Enhanced Geothermal System. However, for fractures with spatial variations, it was determined that modeling with a temperature-dependent viscosity was necessary, especially for systems with high differences in reservoir and injection temperatures, and for fractures with high correlation lengths. The impact of thermal stresses on heat extraction was also investigated. An analog Enhanced Geothermal System, the Altona Field Laboratory, was also studied for thermo-mechanical influences. It was found out that the injection of hot water into the cold rock resulted in thermal stress generation and reduction in the aperture but did not cause significant changes to the temperature profile due to the small volumetric flow rate through the system. Also, anisotropic aperture distributions were studied to determine the impact of thermoelasticity on the heat extraction of Enhanced Geothermal Systems. It was shown that when thermoelasticity is taken into consideration, the thermal drawdown could either be improved or deteriorated depending on the nature of the aperture distribution. The impact of fracture aperture variability was investigated for Enhanced Geothermal Systems using supercritical CO2 as working fluids. It was established that CO2 as an EGS working fluid would result in better heat extracted from the system if the fractures are considered smooth, which agrees with related studies. However, where there is spatial variation in the fracture aperture, channeling could be detrimental to CO2, especially at high fracture correlation lengths and high mass flow rates, due to the high mobility of CO2. The following are the main contributions from this study. First, it has been demonstrated that heat transport is affected by the geometric anisotropy of fracture surfaces. It was determined that in most cases, flowing perpendicular to the direction of shear or slip results in more heat extracted due to more contact of the fluid with the rock while moving through tortuous flow paths. Secondly, the conditions under which a constant viscosity can be used in modeling EGS were determined. If the fractures are known to be smooth, have low correlation lengths, or have distributed surface areas, a constant viscosity can be used in the model, especially if the difference between the reservoir temperature and the injection water temperature is small. However, for anisotropic fracture surfaces, surfaces with high correlations lengths or high tortuosity, and when the difference between the reservoir temperature and injection water temperature is large, the use of constant viscosity could result in significant computational errors from the actual. Thirdly, it has been shown that thermal drawdown could either be improved or deteriorate when thermoelasticity is considered. This finding is different from studies previous studies that have looked into coupling thermohydromechanical processes for fractures with spatial variations and suggests that Enhanced Geothermal Systems may benefit from thermal stimulation. Finally, this work shows the first comparison between CO2 and water at a field scale considering fracture aperture variability. Recommended future work includes modeling of vertical fractures with spatial variations in fracture aperture to investigate how convection may impact the current findings; considering multiple fractures with spatial variations in the fracture aperture; considering non-Darcy flow in the simulation models; coupling geomechanics with the study of CO2 on fractures with spatial variations, and developing proxy models that are quicker to perform the thermohydraulic and thermohydromechanical simulations.

Download or read book Energy Geotechnics written by Alessio Ferrari and published by Springer. This book was released on 2018-08-23 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected full papers presented at the International Symposium on Energy Geotechnics 2018 (SEG-2018), held on 25th – 28th September 2018, at the Swiss Federal Institute of Technology in Lausanne (EPFL). It covers a wide range of topics in energy geotechnics, including energy geostructures, energy geostorage, thermo-hydro-chemo-mechanical behaviour of geomaterials, unconventional resources, hydraulic stimulation, induced seismicity, CO2 geological storage, and nuclear waste disposal as well as topics such as tower and offshore foundations. The book is intended for postgraduate students, researchers and practitioners working on geomechanics and geotechnical engineering for energy-related applications.