Download or read book Hydraulic Modeling written by R. Ettema and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOP 97 presents the ideas behind model design and use for a broad spectrum of hydraulic modeling methods.
Download or read book Hydraulic Modeling and GIS written by Lori Armstrong and published by ESRI Press. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GIS and hydraulic modeling are complementary technologies. By integrating them with each other, water utility companies can reap substantial time and cost savings. A well-designed integration of the two systems provides ready access to mission-critical data. As a result, risk-of-failure analysis, repair and replacement, capacity assessment, capital improvement planning, and numerous other water utility applications run more efficiently and more effectively. Hydraulic Modeling and GIS identifies the challenges that must be navigated and offers best practices for achieving an integration that will be sustainable over the long term.
Download or read book Hydraulic Modelling An Introduction written by Pavel Novak and published by CRC Press. This book was released on 2018-10-24 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms a vital part of all engineering design, yet many hydraulic engineers are not fully aware of the assumptions they make. These assumptions can have important consequences when choosing the best model to inform design decisions. Considering the advantages and limitations of both physical and mathematical methods, this book will help you identify the most appropriate form of analysis for the hydraulic engineering application in question. All models require the knowledge of their background, good data and careful interpretation and so this book also provides guidance on the range of accuracy to be expected of the model simulations and how they should be related to the prototype. Applications to models include: open channel systems closed conduit flows storm drainage systems estuaries coastal and nearshore structures hydraulic structures. This an invaluable guide for students and professionals.
Download or read book Computational Modelling in Hydraulic and Coastal Engineering written by Christopher Koutitas and published by CRC Press. This book was released on 2015-12-02 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines More Than 40 Years of Expert ExperienceComputational modelling and simulation methods have a wide range of applications in hydraulic and coastal engineering. Computational Modelling in Hydraulic and Coastal Engineering provides an introductory but comprehensive coverage of these methods. It emphasizes the use of the finite differences meth
Download or read book Computational Hydraulics written by Ioana Popescu and published by IWA Publishing. This book was released on 2014-08-14 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Hydraulics introduces the concept of modeling and the contribution of numerical methods and numerical analysis to modeling. It provides a concise and comprehensive description of the basic hydraulic principles, and the problems addressed by these principles in the aquatic environment. Flow equations, numerical and analytical solutions are included. The necessary steps for building and applying numerical methods in hydraulics comprise the core of the book and this is followed by a report of different example applications of computational hydraulics: river training effects on flood propagation, water quality modelling of lakes and coastal applications. The theory and exercises included in the book promote learning of concepts within academic environments. Sample codes are made available online for purchasers of the book. Computational Hydraulics is intended for under-graduate and graduate students, researchers, members of governmental and non-governmental agencies and professionals involved in management of the water related problems. Author: Ioana Popescu, Hydroinformatics group, UNESCO-IHE Institute for Water Education, Delft , The Netherlands.
Download or read book Theory of Hydraulic Models written by Mehmet Selim Yalin and published by . This book was released on 1971 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: For graduate students, research workers and practising engineers in the design of hydraulic structures and designing water works.
Download or read book Hydraulic Modeling written by Victor M. Lyatkher and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water. Except for air, it is the most important ingredient to all life on Earth. It surrounds us every day. We are literally bathed in it, we cook our food with it, and we need a steady stream of it in our bodies every single day just to survive. But water, and the study of it, is one of the most important and unheralded branches of engineering, affecting every other aspect of engineering in almost every industry. We harness its power for energy, we inject massive blasts of it into the earth to extract oil, gas, and minerals, and we use it in nearly every single industrial application, including food processing, refining, manufacturing, and waste disposal, just to name a few. Hyraulic modeling is, essentially, the understanding and prediction of fluid flow and its applications in industrial, municipal, and environmental settings, whether in a creekbed, locked in the pores of rocks deep in the earth, or in the ocean. Mathematical models, which started out with mechanical pencils and drafting tables originally, have been increasingly relied upon over the last few decades, due to the invention, growth, and refinement of computers. Physical modeling, however, is still practiced in laboratories, and it is the intersection of physical and mathematical modeling of fluid flow that is most successful in creating models that are safer, less costly, and are better for the environment. Hydraulic Modeling introduces and explores this incredibly important science, from the most basic tenets to valuable real-world applications that are used in industry today. It is the only volume on the market to offer a thorough coverage of the subject without adding lots of useless fluff or inapplicable appendices. It is a must-have for any engineer, scientist, or student working with hydraulic modeling, as a daily reference or a textbook.
Download or read book Recent Advances in Hydraulic Physical Modelling written by R. Martins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Lisbon, Portugal, July 4-15, 1988
Download or read book Hydraulic Modelling written by James Jack Sharp and published by Butterworth-Heinemann. This book was released on 1981 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Modeling written by Victor M. Lyatkher and published by John Wiley & Sons. This book was released on 2016-04-20 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water. Except for air, it is the most important ingredient to all life on Earth. It surrounds us every day. We are literally bathed in it, we cook our food with it, and we need a steady stream of it in our bodies every single day just to survive. But water, and the study of it, is one of the most important and unheralded branches of engineering, affecting every other aspect of engineering in almost every industry. We harness its power for energy, we inject massive blasts of it into the earth to extract oil, gas, and minerals, and we use it in nearly every single industrial application, including food processing, refining, manufacturing, and waste disposal, just to name a few. Hyraulic modeling is, essentially, the understanding and prediction of fluid flow and its applications in industrial, municipal, and environmental settings, whether in a creekbed, locked in the pores of rocks deep in the earth, or in the ocean. Mathematical models, which started out with mechanical pencils and drafting tables originally, have been increasingly relied upon over the last few decades, due to the invention, growth, and refinement of computers. Physical modeling, however, is still practiced in laboratories, and it is the intersection of physical and mathematical modeling of fluid flow that is most successful in creating models that are safer, less costly, and are better for the environment. Hydraulic Modeling introduces and explores this incredibly important science, from the most basic tenets to valuable real-world applications that are used in industry today. It is the only volume on the market to offer a thorough coverage of the subject without adding lots of useless fluff or inapplicable appendices. It is a must-have for any engineer, scientist, or student working with hydraulic modeling, as a daily reference or a textbook.
Download or read book Hydraulic Fracture Modeling written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2017-11-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracture Modeling delivers all the pertinent technology and solutions in one product to become the go-to source for petroleum and reservoir engineers. Providing tools and approaches, this multi-contributed reference presents current and upcoming developments for modeling rock fracturing including their limitations and problem-solving applications. Fractures are common in oil and gas reservoir formations, and with the ongoing increase in development of unconventional reservoirs, more petroleum engineers today need to know the latest technology surrounding hydraulic fracturing technology such as fracture rock modeling. There is tremendous research in the area but not all located in one place. Covering two types of modeling technologies, various effective fracturing approaches and model applications for fracturing, the book equips today’s petroleum engineer with an all-inclusive product to characterize and optimize today’s more complex reservoirs. Offers understanding of the details surrounding fracturing and fracture modeling technology, including theories and quantitative methods Provides academic and practical perspective from multiple contributors at the forefront of hydraulic fracturing and rock mechanics Provides today’s petroleum engineer with model validation tools backed by real-world case studies
Download or read book Hydraulic Servo systems written by Mohieddine Jelali and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date book details the basic concepts of many recent developments of nonlinear identification and nonlinear control, and their application to hydraulic servo-systems. It is very application-oriented and provides the reader with detailed working procedures and hints for implementation routines and software tools.
Download or read book Hydraulic and Environmental Modelling written by R.A. Falconer and published by Routledge. This book was released on 2019-11-12 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1992, this wide-ranging volume features 44 articles from 89 contributors on issues of and solutions to modelling of coastal waters around the world in response to an increasing interest in the development and application of numerical hydraulic models as design and management tools. The contributors advise on areas including tidal current modelling, water quality modelling, sediment transport modelling, wave kinematics and computational methods, along with two keynote articles. The main aim of the conference and its resulting volume was to provide a forum whereby engineers, scientists and planners involved in multi-disciplinary models could collaborate and share their expertise. The counterpart to this book is Hydraulic and Environmental Modelling: Estuarine and River Waters.
Download or read book Hydraulic Systems Volume 7 written by Medhat Khalil and published by Compudraulic LLC. This book was released on 2020-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book adopted lumped modeling technique, using Matlab-Simulink, to model discrete hydraulic components that can be re-characterized and used repeatedly in system models.
Download or read book Discrete Fracture Network Modeling of Hydraulic Stimulation written by Mark W. McClure and published by Springer Science & Business Media. This book was released on 2013-06-15 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete Fracture Network Modeling of Hydraulic Stimulation describes the development and testing of a model that couples fluid-flow, deformation, friction weakening, and permeability evolution in large, complex two-dimensional discrete fracture networks. The model can be used to explore the behavior of hydraulic stimulation in settings where matrix permeability is low and preexisting fractures play an important role, such as Enhanced Geothermal Systems and gas shale. Used also to describe pure shear stimulation, mixed-mechanism stimulation, or pure opening-mode stimulation. A variety of novel techniques to ensure efficiency and realistic model behavior are implemented, and tested. The simulation methodology can also be used as an efficient method for directly solving quasistatic fracture contact problems. Results show how stresses induced by fracture deformation during stimulation directly impact the mechanism of propagation and the resulting fracture network.
Download or read book Hydrologic and Hydraulic Modeling Support written by David R. Maidment and published by ESRI, Inc.. This book was released on 2000 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital elevation model issues in water resources modeling - Preparation of DEMs for use in environmental modeling analysis - Source water protection project : a comparison of watershed delineation methods in ARC/INFO and arcView GIS - DEM preprocessing for efficient watershed delineation - Gis tools for HMS modeling support - Hydrologic model of the buffalo bayou using GIS - Development of digital terrain representation for use in river modeling - HEC-GeoRAS : linking GIS to hydraulic analysis using ARC/INFO and HEC-RAS - Floodplain determination using arcView GIS and HEC-RAS - The accuracy and efficiency of GIS-Based floodplain determinations.
Download or read book Users Guide to Physical Modelling and Experimentation written by Lynne E. Frostick and published by CRC Press. This book was released on 2011-05-20 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Users Guide to Hydraulic Modelling and Experimentation provides a systematic, comprehensive summary of the progress made through HYDRALAB III . The book combines the expertise of many of the leading hydraulic experimentalists in Europe and identifies current best practice for carrying out state-of-the-art, modern laboratory investigations. In addition it gives an inventory and reviews recent advances in instrumentation and equipment that drive present and new developments in the subject. The Guide concentrates on four core areas – waves, breakwaters, sediments and the relatively-new (but rapidly-developing) cross-disciplinary area of hydrodynamics/ecology. Progress made through the ‘CoMIBBS’ component of HYDRALAB III provides the material for a chapter focussed on guidance, principles and practice for composite modelling. There is detailed consideration of scaling and the degree of relevance of laboratory/physical modelling approaches for specific contexts included in each of the individual chapters. The Guide includes outputs from the workshops and several of the innovative transnational access projects that have been supported within HYDRALAB III, as well as the focussed joint research activities SANDS and CoMIBBS. Its primary purpose is to serve as a shared resource to disseminate the outstanding advances achieved within HYDRALAB III but, even more than this, it is a tribute to the human and institutional collaborations that led to and sustained the research advances, the human relationships that were strengthened and initiated through joint participation in the Programme, and the training opportunities that participation provided to the many young researchers engaged in the projects.
