Download or read book Hydraulic Fracturing and Well Stimulation written by Fred Aminzadeh and published by . This book was released on 2019 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual of Hydraulic Fracturing for Well Stimulation and Geologic Studies written by Stuart A. Smith and published by National Water Well Assn. This book was released on 1989 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Offshore Well Completion and Stimulation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-06-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the public is generally aware of the use of hydraulic fracturing for unconventional resource development onshore, it is less familiar with the well completion and stimulation technologies used in offshore operations, including hydraulic fracturing, gravel packs, "fracpacks," and acid stimulation. Just as onshore technologies have improved, these well completion and stimulation technologies for offshore hydrocarbon resource development have progressed over many decades. To increase public understanding of these technologies, the National Academies of Sciences, Engineering, and Medicine established a planning committee to organize and convene a workshop on Offshore Well Completion and Stimulation: Using Hydraulic Fracturing and Other Technologies on October 2-3, 2017, in Washington, DC. This workshop examined the unique features about operating in the U.S. offshore environment, including well completion and stimulation technologies, environmental considerations and concerns, and health and safety management. Participants from across government, industry, academia, and nonprofit sectors shared their perspectives on operational and regulatory approaches to mitigating risks to the environment and to humans in the development of offshore resources. This publication summarizes the presentations and discussions from the workshop.
Download or read book Hydraulic Fracturing and Well Stimulation Volume 1 written by Fred Aminzadeh and published by Wiley-Scrivener. This book was released on 2019-10-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing (or "fracking") has been a source of both achievement and controversy for years, and it continues to be a hot-button issue all over the world. It has made the United States an energy exporting country once again and kept the price of gasoline low, for consumers and companies. On the other hand, it has been potentially a dangerous and destructive practice that has led to environmental problems and health issues. It is a deeply important subject for the petroleum engineer to explore as much as possible. This collection of papers is the first in the series, Sustainable Energy Engineering, tackling this very complex process of hydraulic fracturing and its environmental and economic ramifications. Born out of the journal by the same name, formerly published by Scrivener Publishing, most of the articles in this volume have been updated, and there are some new additions, as well, to keep the engineer abreast of any updates and new methods in the industry. Truly a snapshot of the state-of-the-art, this groundbreaking volume is a must-have for any petroleum engineer working in the field, environmental engineers, petroleum engineering students, and any other engineer or scientist working with hydraulic fracturing.
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Download or read book An Independent Scientific Assessment of Well Stimulation in California written by Ccst and published by . This book was released on 2015-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development Geology Reference Manual written by Diana Morton-Thompson and published by AAPG. This book was released on 1993 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Fracturing Chemicals and Fluids Technology written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2013-08-14 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. Pinpoints the specific compounds used in any given fracturing operation Provides a systematic approach to classifying fracturing fluid technology to meet specific project needs Eliminates guesswork with easy-to-understand language on selection and components of hydraulic fracturing chemicals Addresses environmental aspects of chemicals to safeguard employees and protect the environment
Download or read book A New Generation of Hydraulic Fracturing Fluids for Well Stimulation written by William Timmons Malone and published by . This book was released on 1971 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coiled Tubing and Other Stimulation Techniques written by Mohammed Ismail Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good engineers never stop looking for opportunities to improve the performance of their production systems. Performance enhancement methods are always carefully examined, and production data is analyzed in order to identify determining factors affecting performance.The two main activities of the production engineer in the petroleum and related industries are reservoir stimulation and artificial lift. The classic solution to maximizing a well's productivity is to stimulate it. The basis for selecting stimulation candidates should be a review of the well's actual and theoretical IPR. Low permeability wells often need fracturing on initial completion. In low permeability zones, additional post stimulation production can be significant to the economics, however, the production engineer needs to make management aware of the true long term potential or else overly optimistic projections can easily be made.The main purpose of stimulation is to enhance the property value by the faster delivery of the petroleum fluid and/or to increase ultimate economic recovery. The aim of reservoir stimulation is to bypass near-wellbore damage and return a well to its “natural” productivity / injectivity, to extend a conductive path deep into a formation and thus increase productivity beyond the natural level and to produce hydrocarbon from tight formation.The importance of reservoir stimulation is increasing due to following reasons: • Hydrocarbon fields in their mid-life• Production in these fields are in declining trend• The thrust area: Enhancement of productionHence, to improve productivity of the well matrix stimulation and hydraulic fracturing are intended to remedy, or even improve, the natural connection of the wellbore with the reservoir, which could delay the need for artificial lift.This book presents procedures taken in the Oil & Gas Industry for identifying well problems, and it suggests means of solving problems with the help of the Coil Tube unit which is used for improving well productivity and techniques like Acidizing and Hydraulic Fracturing.
Download or read book Oil Well Stimulation written by Robert Samuel Schechter and published by . This book was released on 1992 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing the quantitative aspects of well simulation, and including worked examples and homework problems, this book covers a wide variety of methods of oil well simulation.
Download or read book Microseismic Imaging of Hydraulic Fracturing written by Shawn Mawell and published by SEG Books. This book was released on 2014-01-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microseismic Imaging of Hydraulic Fracturing: Improved Engineering of Unconventional Shale Reservoirs (SEG Distinguished Instructor Series No. 17) covers the use of microseismic data to enhance engineering design of hydraulic fracturing and well completion. The book, which accompanies the 2014 SEG Distinguished Instructor Short Course, describes the design, acquisition, processing, and interpretation of an effective microseismic project. The text includes a tutorial of the basics of hydraulic fracturing, including the geologic and geomechanical factors that control fracture growth. In addition to practical issues associated with collecting and interpreting microseismic data, potential pitfalls and quality-control steps are discussed. Actual case studies are used to demonstrate engineering benefits and improved production through the use of microseismic monitoring. Providing a practical user guide for survey design, quality control, interpretation, and application of microseismic hydraulic fracture monitoring, this book will be of interest to geoscientists and engineers involved in development of unconventional reservoirs.
Download or read book Numerical Simulation in Hydraulic Fracturing Multiphysics Theory and Applications written by Xinpu Shen and published by CRC Press. This book was released on 2017-03-27 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of unconventional petroleum resources in the recent decade and the rapid development of computational technology have provided the opportunity to develop and apply 3D numerical modeling technology to simulate the hydraulic fracturing of shale and tight sand formations. This book presents 3D numerical modeling technologies for hydraulic fracturing developed in recent years, and introduces solutions to various 3D geomechanical problems related to hydraulic fracturing. In the solution processes of the case studies included in the book, fully coupled multi-physics modeling has been adopted, along with innovative computational techniques, such as submodeling. In practice, hydraulic fracturing is an essential project component in shale gas/oil development and tight sand oil, and provides an essential measure in the process of drilling cuttings reinjection (CRI). It is also an essential measure for widened mud weight window (MWW) when drilling through naturally fractured formations; the process of hydraulic plugging is a typical application of hydraulic fracturing. 3D modeling and numerical analysis of hydraulic fracturing is essential for the successful development of tight oil/gas formations: it provides accurate solutions for optimized stage intervals in a multistage fracking job. It also provides optimized well-spacing for the design of zipper-frac wells. Numerical estimation of casing integrity under stimulation injection in the hydraulic fracturing process is one of major concerns in the successful development of unconventional resources. This topic is also investigated numerically in this book. Numerical solutions to several other typical geomechanics problems related to hydraulic fracturing, such as fluid migration caused by fault reactivation and seismic activities, are also presented. This book can be used as a reference textbook to petroleum, geotechnical and geothermal engineers, to senior undergraduate, graduate and postgraduate students, and to geologists, hydrogeologists, geophysicists and applied mathematicians working in this field. This book is also a synthetic compendium of both the fundamentals and some of the most advanced aspects of hydraulic fracturing technology.
Download or read book Hydraulic Fracturing written by Michael Berry Smith and published by CRC Press. This book was released on 2015-12-16 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing effectively busts the myths associated with hydraulic fracturing. It explains how to properly engineer and optimize a hydraulically fractured well by selecting the right materials, evaluating the economic benefits of the project, and ensuring the safety and success of the people, environment, and equipment. From data estimation
Download or read book A Review of Well Stimulation and Techniques to Prevent Formation Damage in Oil and Gas Production written by John L. Eakin and published by . This book was released on 1964 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coiled Tubing and Other Stimulation Techniques written by Mohammed Ismail Iqbal and published by River Publishers Chemical, Env. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of reservoir stimulation is to bypass near-wellbore damage and return a well to its "natural" productivity / injectivity, to extend a conductive path deep into a formation and thus increase productivity beyond the natural level and to produce hydrocarbon from tight formation.
Download or read book Oil Well Testing Handbook written by Amanat Chaudhry and published by Elsevier. This book was released on 2004-01-24 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil Well Testing Handbook is a valuable addition to any reservoir engineer's library, containing the basics of well testing methods as well as all of the latest developments in the field. Not only are "evergreen" subjects, such as layered reservoirs, naturally fractured reservoirs, and wellbore effects, covered in depth, but newer developments, such as well testing for horizontal wells, are covered in full chapters. Covers real-life examples and cases The most up-to-date information on oil well testing available The perfect reference for the engineer or textbook for the petroleum engineering student
