Download or read book Hole Making and Drilling Technology for Composites written by Ahmad Baharuddin Abdullah and published by Woodhead Publishing. This book was released on 2019-04-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hole-Making and Drilling Technology for Composites: Advantages, Limitations and Potential presents the latest information on hole-making, one of the most commonly used processes in the machining of composites. The book provides practical guidance on hole-making and drilling technology and its application in composite materials and structures. Chapters are designed via selected case studies to identify the knowledge gap in hole-making operations in composites and to highlight the deficiencies of current methods. The book documents the latest research, providing a better understanding of the pattern and characterization of holes produced by various technologies in composite materials. It is an essential reference resource for academic and industrial researchers and professional involved in the manufacturing and machining of composites. In addition, it is ideal for postgraduate students and designers working on the design and fabrication of polymeric composites in automotive and aerospace applications. Features updated information on the most relevant hole-drilling methods and their potential in aircraft and other structural applications Features practical guidance for the end user on how to select the most appropriate method when designing fiber-reinforced composite materials Demonstrates systematic approaches and investigations on the design, development and characterization of ‘composite materials’
Download or read book Drilling of Composite Materials written by J. Paulo Davim and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the use of composite materials has increased in various areas of science and technology due to their special properties, namely for these application in aircraft, automotive, defence and aerospace industries as well others advanced industries. Drilling is a frequently practised machining process in modern industry owing to the need for component assembly in composite structures. This book aims to provide the research and review studies in drilling of composite materials. The first three chapters provide information on delamination and damage reduction in drilling of composite materials. The following two chapters deal with influence of machining parameters on the delamination. The sixth chapter is focused on modelling of drilling aluminium matrix composites using artificial neural networks. The chapter seventh is dedicated study of analysis of delamination in drilling wood composite medium density fibreboards. Finally, the last chapter of this book is focused on studies on composite drilling - the state of the art. The present research book can be used as for final undergraduate engineering course (for example, mechanical, manufacturing, materials etc) or as a subject on machining/composites at the postgraduate level. Also, this research book can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing, materials and mechanical engineers, professional in composites technology and related industries.
Download or read book Drilling Technology written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-10-22 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide recent information on advances in drilling technology. The use of advanced machines, appropriate strategies and special drilling tools can signifi cantly reduce the machining time required for drilling operations, and consequently the production costs, and improve the quality of the holes produced. For these reasons an improvement of the drilling technology is very important for the modern manufacturing industries. This book can be used as a research book for fi nal undergraduate engineering course or at postgraduate level. It can also serve as a useful reference for academics, researchers, mechanical, industrial, production, manufacturing and materials engineers, professionals in drilling technology and related matters.
Download or read book Drilling of Polymer Matrix Composites written by Vijayan Krishnaraj and published by Springer Science & Business Media. This book was released on 2013-07-08 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief focus on drilling of polymer matrix composites for aerospace and defence applications. It gives an introduction to machining of polymer composites and discusses drilling as a processing of composites.
Download or read book Fiber Reinforced Composites written by Kuruvilla Joseph and published by Woodhead Publishing. This book was released on 2021-03-20 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-based fibre-reinforced composites FRC’s have now come out as a major class of structural materials being used or regarded as substituent’s for metals in several critical components in space, automotive and other industries (marine, and sports goods) owing to their low density, strength-weight ratio, and fatigue strength. FRC’s have several commercial as well as industrial applications ranging from aircraft, space, automotive, sporting goods, marine, and infrastructure. The above-mentioned applications of FRC’s clearly reveal that FRC’s have the potential to be used in a broad range of different engineering fields with the added advantages of low density, and resistance to corrosion compared to conventional metallic and ceramic composites. However, for scientists/researchers/R&D’s to fabricate FRC’s with such potential there should be careful and precise design followed by suitable process development based on properties like mechanical, physical, and thermal that are unique to each application. Hence the last few decades have witnessed considerable research on fibre reinforced composites. Fibre Reinforced Composites: Constituents, Compatibility, Perspectives and Applications presents a widespread all-inclusive review on fibre-reinforced composites ranging from the different types of processing techniques to chemical modification of the fibre surface to enhance the interfacial adhesion between the matrix and fibre and the structure-property relationship. It illustrates how high value composites can be produced by efficient and sustainable processing methods by selecting different constituents [fibres and resins]. Researchers in academia working in composites and accompanying areas [materials characterisation] and industrial manufacturers who need information on composite constituents and how they relate to each other for a certain application will find the book extremely useful when they need to make decisions about materials selection for their products. Focuses on the different types of FRC’s that are currently available (e.g. from polymeric matrices to metallic and ceramic matrices, from carbon fibre to different types of natural fibres and from short to long fibre reinforced), their processing techniques, characterization of different properties, and how to improve the interfacial adhesion between an incompatible fibre and matrix and their applications Looks at crisis areas such as how to incorporate incompatible fibres and matrices together (e.g. Non-polar polypropylene matrix is not compatible with that of polar natural fibres and hence suitable surface modifications are required to make them compatible with each other) along with low cost processing methods, low density and high strength Uncovers clarifications to both elementary and practical problems related to the fabrication of FRCs Schematic representations depicting the interaction between different fibre types and matrices will be provided in some chapters
Download or read book Drilling of Composite Materials written by J. Paulo Davim and published by . This book was released on 2009 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machining Technology for Composite Materials written by H Hocheng and published by Elsevier. This book was released on 2011-11-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining processes play an important role in the manufacture of a wide variety of components. While the processes required for metal components are well-established, they cannot always be applied to composite materials, which instead require new and innovative techniques. Machining technology for composite materials provides an extensive overview and analysis of both traditional and non-traditional methods of machining for different composite materials. The traditional methods of turning, drilling and grinding are discussed in part one, which also contains chapters analysing cutting forces, tool wear and surface quality. Part two covers non-traditional methods for machining composite materials, including electrical discharge and laser machining, among others. Finally, part three contains chapters that deal with special topics in machining processes for composite materials, such as cryogenic machining and processes for wood-based composites. With its renowned editor and distinguished team of international contributors, Machining technology for composite materials is an essential reference particularly for process designers and tool and production engineers in the field of composite manufacturing, but also for all those involved in the fabrication and assembly of composite structures, including the aerospace, marine, civil and leisure industry sectors. Provides an extensive overview of machining methods for composite materials Chapters analyse cutting forces, tool wear and surface quality Cryogenic machining and processes for wood based composites are discussed
Download or read book Flexible Automation and Intelligent Manufacturing Establishing Bridges for More Sustainable Manufacturing Systems written by Francisco J. G. Silva and published by Springer Nature. This book was released on 2023-08-23 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 – 22, 2023, in Porto, Portugal, this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas.
Download or read book 2023 Asia Pacific International Symposium on Aerospace Technology APISAT 2023 Proceedings written by Song Fu and published by Springer Nature. This book was released on with total page 1975 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Futuristic Trends in Intelligent Manufacturing written by K. Palanikumar and published by Springer Nature. This book was released on 2021-05-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how Industry 4.0 is a strategic approach for integrating advanced control systems with Internet technology enabling communication between people, products and complex systems. It includes processes such as machining features, machining knowledge, execution control, operation planning, machine tool selection and cutting tool. This book focuses on different articles related to advanced technologies, and their integration to foster Industry 4.0, being useful for researchers as well as industrialists to refer and utilize the information in production control.
Download or read book Hybrid Fiber Composites written by Anish Khan and published by John Wiley & Sons. This book was released on 2020-09-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced composites are exceptionally versatile materials whose properties can be tuned to exhibit a variety of favorable properties such as high tensile strength and resistance against wear or chemical and thermal influences. Consequently, these materials are widely used in various industrial fields such as the aircraft, marine, and automobile industry. After an overview of the general structures and properties of hybrid fiber composites, the book focuses on the manufacturing and processing of these materials and their mechanical performance, including the elucidation of failure mechanisms. A comprehensive chapter on the modeling of hybrid fiber composites from micromechanical properties to macro-scale material behavior is followed by a review of applications of these materials in structural engineering, packaging, and the automotive and aerospace industries.
Download or read book Advances in Manufacturing Technology XXXIII written by Y. Jin and published by IOS Press. This book was released on 2019-08-22 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and management of technologies and operations are key to the success of all types of manufacturing business. This book presents the proceedings of the 17th International Conference on Manufacturing Research (ICMR 2019), held in Belfast, UK, on 10 – 12 September 2019. ICMR has been the UK’s main manufacturing research conference for 34 years and an international conference since 2003. It brings together researchers, academics and industrialists to share their vision, knowledge and experience and discuss emerging trends and new challenges in manufacturing research. The conference theme of ICMR2019 was smart manufacturing, and the book includes the 82 papers presented at the conference (representing an acceptance rate of 69%). These have been divided into 13 parts, which cover topics ranging from robot automation and machining processes, additive manufacturing, composite manufacturing, design methods, to information management, quality control, production optimization and product lifecycle management. Providing an overview of current trends and developments, the book will be of interest to researchers and engineers in the relevant area of manufacturing processes, design and production management.
Download or read book Advanced Composite Materials and Technologies for Aerospace Applications written by Richard Day and published by Lulu.com. This book was released on 2012 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Second International Conference on Advanced Composite Materials and Technologies for Aerospace Applications held at Glynd
Download or read book Polymer Optical Fibres written by Christian-Alexander Bunge and published by Woodhead Publishing. This book was released on 2016-08-25 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Optical Fibres: Fibre Types, Materials, Fabrication, Characterization, and Applications explores polymer optical fibers, specifically their materials, fabrication, characterization, measurement techniques, and applications. Optical effects, including light propagation, degrading effects of attenuation, scattering, and dispersion, are explained. Other important parameters like mechanical strength, operating temperatures, and processability are also described. Polymer optical fibers (POF) have a number of advantages over glass fibers, such as low cost, flexibility, low weight, electromagnetic immunity, good bandwidth, simple installation, and mechanical stability. Provides systematic and comprehensive coverage of materials, fabrication, properties, measurement techniques, and applications of POF Focuses on industry needs in communication, illumination and sensors, the automotive industry, and medical and biotechnology Features input from leading experts in POF technology, with experience spanning optoelectronics, polymer, and textiles Explains optical effects, including light propagation, degrading effects of attenuation, scattering, and dispersion
Download or read book Primary and Secondary Manufacturing of Polymer Matrix Composites written by Kishore Debnath and published by CRC Press. This book was released on 2017-09-18 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an insight into the primary and secondary manufacturing of different class of polymer matrix composites (PMCs). The major focus is on the fabrication of a variety of PMCs with substantial coverage of various processing techniques and related advantages and limitations. The book also describes secondary manufacturing processes such as machining and joining of PMCs and provides the know-how related to developing these techniques. It discusses recently commercialized tools and techniques and highlights the opportunities provided by the design and development of newer cutting tools and machining methods. The book covers material selection guidelines, product manufacturability, product development process, and cost-estimating techniques that help readers to understand where a process fits within the overall scheme and which is appropriate for a particular component. This book provides professionals with valuable information related to composites product manufacturing as well as state-of-the-art knowledge in this field.
Download or read book Machining and Machinability of Fiber Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries.
Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, light-weight materials such as composites and their wide range of applications in the aerospace and automotive industries, in civil infrastructure and in sporting applications, it is critical that the residual stresses of composite materials are understood and measured correctly. The first part of this important book reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. Various mathematical (analytical and numerical) methods for calculation of residual stresses in composite materials are also presented. Chapters in the first section of the book discuss the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses residual stresses in polymer matrix, metal-matrix and a range of other types of composites. Moreover, the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses is discussed. Residual stresses in composite materials provides a comprehensive overview of this important topic, and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine and sporting industries. Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses Discusses residual stresses in polymer matrix, metal-matrix and other types of composite Considers the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses
