Download or read book Historical Design Information of Aircraft Landing Gear and Control Actuation Systems written by A-5B Gears, Struts and Couplings Committee and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This aerospace information report (AIR) provides historical design information for various aircraft landing gear and actuation/control systems that may be useful in the design of future systems for similar applications. It presents the basic characteristics, hardware descriptions, functional schematics, and discussions of the actuation mechanisms, controls, and alternate release systems.The report is divided into two basic sections: 1Landing gear actuation system history from 1876 to the present. This section provides an overview and the defining examples that demonstrate the evolution of landing gear actuation systems to the present day. 2This section of the report provides an in depth review of various aircraft. A summary table of aircraft detail contained within this section is provided in paragraph 4.1.The intent is to add new and old aircraft retraction/extension systems to this AIR as the data becomes available.NOTES 1For some aircraft, the description is incomplete, due to difficulties in obtaining the data. This SAE Aerospace Information Report (AIR) provides historical design information for various aircraft landing gear and actuation/control systems that may be useful in the design of future systems for similar applications. It presents the basic characteristics, hardware descriptions, functional schematics, and discussions of the actuation mechanisms, controls, and alternate release systems. This AIR is intended as a reference source of information for aircraft actuation system designs. The exclusion or omission of any other appropriate actuation system or subsystem should not limit consideration of its use on future aircraft. AIR5565 has been reaffirmed to comply with the SAE Five-Year Review policy.

Download or read book The Design of Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2021-02-18 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear and its associated systems represent a compelling design challenge: simultaneously a system, a structure, and a machine, it supports the aircraft on the ground, absorbs landing and braking energy, permits maneuvering, and retracts to minimize aircraft drag. Yet, as it is not required during flight, it also represents dead weight and significant effort must be made to minimize its total mass. The Design of Aircraft Landing Gear, written by R. Kyle Schmidt, PE (B.A.Sc. - Mechanical Engineering, M.Sc. - Safety and Aircraft Accident Investigation, Chairman of the SAE A-5 Committee on Aircraft Landing Gear), is designed to guide the reader through the key principles of landing system design and to provide additional references when available. Many problems which must be confronted have already been addressed by others in the past, but the information is not known or shared, leading to the observation that there are few new problems, but many new people. The Design of Aircraft Landing Gear is intended to share much of the existing information and provide avenues for further exploration. The design of an aircraft and its associated systems, including the landing system, involves iterative loops as the impact of each modification to a system or component is evaluated against the whole. It is rare to find that the lightest possible landing gear represents the best solution for the aircraft: the lightest landing gear may require attachment structures which don't exist and which would require significant weight and compromise on the part of the airframe structure design. With those requirements and compromises in mind,The Design of Aircraft Landing Gear starts with the study of airfield compatibility, aircraft stability on the ground, the correct choice of tires, followed by discussion of brakes, wheels, and brake control systems. Various landing gear architectures are investigated together with the details of shock absorber designs. Retraction, kinematics, and mechanisms are studied as well as possible actuation approaches. Detailed information on the various hydraulic and electric services commonly found on aircraft, and system elements such as dressings, lighting, and steering are also reviewed. Detail design points, the process of analysis, and a review of the relevant requirements and regulations round out the book content. The Design of Aircraft Landing Gear is a landmark work in the industry, and a must-read for any engineer interested in updating specific skills and students preparing for an exciting career.

Download or read book Aircraft Landing Gear Design written by Norman S. Currey and published by AIAA. This book was released on 1988 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book available today that covers military and commercial aircraft landing gear design. It is a comprehensive text that will lead students and engineers from the initial concepts of landing gear design through final detail design. The book provides a vital link in landing gear design technology from historical practices to modern design trends, and it considers the necessary airfield interface with landing gear design. The text is backed up by calculations, specifications, references, working examples.

Download or read book Advances in Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear system is relatively unique on board an aircraft—it is both structure and machine, supporting the aircraft on the ground, yet providing functions such as energy absorption during landing, retraction, steering, and braking. Advances in Aircraft Landing Gear is a collection of eleven hand-picked technical papers focusing on the significant advancements that have occurred in this field concerning numeric modeling, electric actuation, and composite materials. Additionally, papers discussing self-powered landing gear and more electrical overall aircraft architectures have been included. The content of Advances in Aircraft Landing Gear is divided into two sections: Analysis and Design Methods; and Electric Actuation, Control, and Taxi. For those looking for more information on aircraft landing gears, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by this committee appears in the appendix.

Download or read book Advances in Aircraft Brakes and Tires written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: An aircraft’s interface with the ground—through its wheels, tires, and brakes—is critical to ensure safe and reliable operation, demanding constant technology development. Significant advancements have occurred with almost all civil airliners entering service with radial tires, and with the Boeing 787 having entered service in 2011 with electrically actuated carbon-carbon brakes. This book is divided into three sections: tires, control systems, and brakes, presenting a selection of the most relevant papers published by SAE International on these matters in the past fifteen years. They have been chosen to provide significant interest to those engineers working in the landing gear field. With almost all current large civil aircraft (and many smaller aircraft) opting exclusively for carbon-carbon brakes, a number of papers addressing the challenges of this technology are included. Papers touching on tire behavior and papers discussing brake control strategies are provided. For those looking for more information on aircraft landing gears, brakes, and tires, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by the A-5 committee is included in the appendix.

Download or read book Aircraft Flight Control Actuation System Design written by Eugene T. Raymond and published by . This book was released on 1993 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fly By Wire written by Vernon R Schmitt and published by SAE International. This book was released on 1998-10-01 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fly-by-wire in aircraft flight control design is more than adding a simple wire -- it is a sophisticated system that changes the way aircraft are designed and the way they fly. Prepared and written by experts who directed or staffed fly-by-wire research and development programs, this book includes explanations of the system's design and application, providing both the "how" and the "why" of this remarkable technology. Chapters include: Introduction Background of Fly-by-Wire Required Programs The Survivable Flight Control System (SFCS) Program Technology Transition and Application

Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by WCB/McGraw-Hill. This book was released on 1998 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Flight Stability and Automatic Control presents an organized introduction to the useful and relevant topics necessary for a flight stability and controls course. Not only is this text presented at the appropriate mathematical level, it also features standard terminology and nomenclature, along with expanded coverage of classical control theory, autopilot designs, and modern control theory. Through the use of extensive examples, problems, and historical notes, author Robert Nelson develops a concise and vital text for aircraft flight stability and control or flight dynamics courses.

Download or read book Aircraft Dynamics and Automatic Control written by Duane T. McRuer and published by Princeton University Press. This book was released on 2014-07-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeronautical engineers concerned with the analysis of aircraft dynamics and the synthesis of aircraft flight control systems will find an indispensable tool in this analytical treatment of the subject. Approaching these two fields with the conviction that an understanding of either one can illuminate the other, the authors have summarized selected, interconnected techniques that facilitate a high level of insight into the essence of complex systems problems. These techniques are suitable for establishing nominal system designs, for forecasting off-nominal problems, and for diagnosing the root causes of problems that almost inevitably occur in the design process. A complete and self-contained work, the text discusses the early history of aircraft dynamics and control, mathematical models of linear system elements, feedback system analysis, vehicle equations of motion, longitudinal and lateral dynamics, and elementary longitudinal and lateral feedback control. The discussion concludes with such topics as the system design process, inputs and system performance assessment, and multi-loop flight control systems. Originally published in 1974. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.

Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.

Download or read book Aircraft Landing Gear Simulation and Control written by SanoopKumar Ambalaparambil and published by . This book was released on 2003 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The focus of this work is the development of a Multi-degree Of Freedom (MOF) model for simulation and control of the landing performances of the SAE Heavy Lift Airplane model built by the Aerodynamics design team of RIT. From dynamic considerations, the landing gear performance has two areas of interest: a) behavior during touchdown impact, and b) response to excitation induced by track roughness during taxi, take-off and later part of the landing runs. As the problem at hand is highly nonlinear and complex, initially a simplified 1-dof model of the same aircraft is derived and analyzed using Lagrange's equations and energy methods. After understanding the basic dynamics of the system, a more complex 3-dof model is derived considering the dynamics of the wheels of the landing gear. Analyses with and without the runway profile are carried out to study the effects of the input signals on the derived model. In order to achieve a controlled landing behavior of the aircraft, a linear damper or shock absorber is incorporated into the analysis and simulation, even though it is not available in the original prototype. The nonlinear models are linearized in Simulink and control system designs are performed on the linearized models using Root Locus techniques, Pole Placement methods, LQR approach, and Error Space approach. The designed controllers are then applied on the original nonlinear 3-dof model of the landing gear and a study of the effects of changing landing gear parameters is performed. Open loop and Closed loop simulations are carried out to come up with an effective controller type, which will ensure optimum landing performance in a normal landing situation."--Abstract.

Download or read book Airfield Compatibility written by Kyle Schmidt and published by SAE International. This book was released on 2022-05-27 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landing gear provides an intriguing and compelling challenge, combining many fields of science and engineering. Designed to guide the interested reader through the fundamentals aircraft wheel, brake and brake control design system, this book presents a specific element of landing gear design in an accessible way. The author’s two volume treatise, The Design of Aircraft Landing, was the inspiration for this book. The Design of Aircraft Landing is a landmark work for the industry and utilizes over 1,000 pages to present a complete, in-depth study of each component that must considered when designing an aircraft’s landing gear. While recognizing that not everyone may need the entire treatise, Aircraft Wheels, Brakes, and Brake Controls: Key Principles for Landing Gear Design is one of three quick reference guides focusing on one key element of aircraft design and landing gear design. This volume features an overview of brakes, aircraft deceleration, brake sizing, brake design, braking accessories, wheels, brake control as well as brake issues and concerns. R. Kyle Schmidt has over 25 years’ experience across three countries and has held a variety of variety of engineering roles relating to the development of new landing gears and the sustainment of existing landing gears in service.

Download or read book Advances in Aircraft Landing Gear and Advances in Aircraft Brakes and Tires written by Robert Kyle Schmidt and published by . This book was released on 2015-12 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set is comprised of two titles, Advances in Aircraft Landing Gear and Advances in Aircraft Brakes and Tires both edited by Robert Kyle Schmidt, a mechanical engineer and known expert in this subject. Advances in Aircraft Landing Gear is a collection of eleven hand-picked technical papers focusing on the significant advancements that have occurred in this field concerning numeric modeling, electric actuation, and composite materials. Advances in Aircraft Brakes and Tires focuses on the aircraft's interface with the ground - through its wheels, tires and brakes - a critical part of a safe and reliable operation. It presents a selection of the most relevant papers published by SAE International on these matters in the past fifteen years. For those looking for more information on aircraft landing gears, brakes, and tires, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by the A-5 committee is included in the appendix.

Download or read book A Study of Analytic Modeling Techniques for Landing Gear Dynamics written by and published by . This book was released on 1982 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to accurately predict the dynamic response of an aircraft while it is operating in the taxi mode depends, in part on the correct modeling of the dynamic characteristics of the landing gear system. Traditionally, landing gear have been designed to absorb landing impact ('shock absorber') and their characteristics during periodic, oscillatory response ('spring') have been considered as secondary. With the increased emphasis on the rough or damaged field taxi operation, there is a requirement to determine the best methods for modeling the gear system. This report documents a brief review of the state of the art of gear modeling. A study was then conducted to evaluate important model parameters, using a simple cantilevered gear computer simulation. Also included is the development of a technique for the experimental determination of important gear system parameters. (Author).

Download or read book Research and Development of Aircraft Control Actuation Systems The Development of a Direct Drive Fly By Wire Flight Control System and Evaluation of a Force Sharing Fly By Wire Actuator written by Gavin D. Jenney and published by . This book was released on 1977 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the design and test evaluation of a direct drive fly-by-wire redundant control system. Also included in the report is the evaluation testing of a fly-by-wire tandem actuator mechanization developed by Parker-Hannifin Aerospace Hydraulics Division, Irvine California. The direct drive system is based on using moving coil force motors to position a hydraulic control valve without hydraulic amplification. The system is designed as a single fail operate system which will accept one input or component failure and continue to operate with acceptable performance. The test results verified that the failure modes and performance met the design goals. The system incorporates component dispersion techniques to allow single hit survivability. The direct drive mechanization offers adequate performance with minimum complexity as a fly-by-wire control system. The Parker-Hannifin actuator mechanization is a two fail operate configuration using an integrated secondary actuator with both force and position summing. The test results document the operational characteristics of the design. (Author).

Download or read book Advances in Aircraft Landing Gear written by R. Kyle Schmidt and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear system is relatively unique on board an aircraft--it is both structure and machine, supporting the aircraft on the ground, yet providing functions such as energy absorption during landing, retraction, steering, and braking. Advances in Aircraft Landing Gear is a collection of eleven hand-picked technical papers focusing on the significant advancements that have occurred in this field concerning numeric modeling, electric actuation, and composite materials. Additionally, papers discussing self-powered landing gear and more electrical overall aircraft architectures have.

Download or read book Aviation Safety and Pilot Control written by National Research Council and published by National Academies Press. This book was released on 1997-03-28 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adverse aircraft-pilot coupling (APC) events include a broad set of undesirable and sometimes hazardous phenomena that originate in anomalous interactions between pilots and aircraft. As civil and military aircraft technologies advance, interactions between pilots and aircraft are becoming more complex. Recent accidents and other incidents have been attributed to adverse APC in military aircraft. In addition, APC has been implicated in some civilian incidents. This book evaluates the current state of knowledge about adverse APC and processes that may be used to eliminate it from military and commercial aircraft. It was written for technical, government, and administrative decisionmakers and their technical and administrative support staffs; key technical managers in the aircraft manufacturing and operational industries; stability and control engineers; aircraft flight control system designers; research specialists in flight control, flying qualities, human factors; and technically knowledgeable lay readers.