Download or read book High Temperature Lubrication written by A. R. Lansdown and published by . This book was released on 1994 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Lubrication is based on a study of lubrication at high temperatures, the need for which was highlighted by a survey of engineers in industry. One of the first difficulties in discussing high temperature lubrication is the problem of defining what is a high temperature. In the context of grease lubrication, high temperature problems can arise at any temperature over 130?C; for the lubrication of vehicle engines, sump temperatures over 150?C are probably too high; solid lubrication of ceramics can be successful up to 100?C. It follows, then, that for the engineers and technologist for whom this book is written, a working definition for 'high temperature' can be taken to mean any temperature high enough to cause problems which would not arise at lower temperatures. The aim of this book is to provide, in a simple form which can be easily understood by non-specialists, information which is of value to engineers faced with problems of lubrication at high temperatures, whether those temperatures are less than 140?C or greater than 1000?C. The various topics have been described in sufficient detail to enable an engineer to understand the factors involved in solving a high temperature lubrication problem without unnecessary complication.

Download or read book High Temperature Lubrication Study written by M. B. Peterson and published by . This book was released on 1961 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High temperature High shear HTHS Oil Viscosity written by James A. Spearot and published by ASTM International. This book was released on 1989 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Lubricants and Oils written by United States. National Technical Information Service and published by . This book was released on 1976* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biolubricants written by Jan C.J. Bart and published by Elsevier. This book was released on 2012-12-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricants are essential in engineering, however more sustainable formulations are needed to avoid adverse effects on the ecosystem. Bio-based lubricant formulations present a promising solution. Biolubricants: Science and technology is a comprehensive, interdisciplinary and timely review of this important subject.Initial chapters address the principles of lubrication, before systematically reviewing fossil and bio-based feedstock resources for biodegradable lubricants. Further chapters describe catalytic, (bio) chemical functionalisation processes for transformation of feedstocks into commercial products, product development, relevant legislation, life cycle assessment, major product groups and specific performance criteria in all major applications. Final chapters consider markets for biolubricants, issues to consider when selecting and using a lubricant, lubricant disposal and future trends.With its distinguished authors, Biolubricants: Science and technology is a comprehensive reference for an industrial audience of oil formulators and lubrication engineers, as well as researchers and academics with an interest in the subject. It provides an essential overview of scientific and technological developments enabling the cost-effective improvement of biolubricants, something that is crucial for the green future of the lubricant industry. - A comprehensive, interdisciplinary and timely review of bio-based lubricant formulations - Addresses the principles of lubrication - Reviews fossil and bio-based feedstock resources for biodegradable lubricants

Download or read book High temperature Lubrication of Electric Motor Ball Bearings written by U. S. Naval Research Laboratory, Washington, D.C. and published by . This book was released on 1952 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of Solid Film Lubricants and Sliding Contacts at Temperatures Above 1000 degrees F written by Marshall B. Peterson and published by . This book was released on 1960 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boundary Lubrication and Thermal Stability Studies with Five Liquid Lubricants in Nitrogen to 400 C written by William R. Jones and published by . This book was released on 1971 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel friction and wear tests in nitrogen with paraffinic resins, synthetic paraffinic oil, glycol, and ester lubricants including thermal stability at high temperatures.

Download or read book Evaluation of High Temperature Lubricants for Downhole Motors in Geothermal Applications written by and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A Bearing-Seal Package is being developed for use with downhole motors and turbines for drilling geothermal wells. The lubricant will be sealed in the bearing section which will allow the bearings to operate directly in the lubricant. The development of the Bearing-Seal Package involves the improvement of high temperature seals and lubricants. Candidate high temperature lubricants were tested in the High Temperature Lubricant Tester under elevated temperatures and pressures. A list of candidate high temperature lubricants, a description of the lubricant test program, and the lubricant test results are presented.

Download or read book CRC Handbook of Lubrication and Tribology Volume III written by E. Richard Booser and published by CRC Press. This book was released on 1993-12-21 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume III extends this handbook series to cover new developments and topics in tribology that have occurred during the past decade. It includes in-depth discussions on revolutionary magnetic bearings used in demanding applications in compressors, high-speed spindles, and aerospace equipment. Extensive coverage is given to tribology developments in office machines and in magnetic storage systems for computers. Monitoring sensors are addressed in the first chapter, followed by chapters on specific monitoring techniques for automobiles, diesels, and rotating machines. One chapter is devoted to procedures used for tracking the remaining life of lubricants. Synthetic lubricants are discussed by outstanding specialists in this rapidly developing field. Synthetics are increasingly important in widely diverse areas, including compressors using the new ozone-layer-friendly refrigerants and a variety of extreme-temperature and environmentally-sensitive applications. Water- and gas-lubricated bearings are given similar attention. The contributors also develop a new, unified coverage for fatigue life of ball and roller bearings; for design and application of porous metal bearings; for self-contained lubrication, involving oil rings, disks, and wicks; and for plastic bearings. Each of these classes of bearings are used by the millions daily throughout industry. The three-volume handbook is an essential reference to tribologists and lubrication, mechanical, and automotive engineers. It is invaluable to lubricant suppliers; bearing companies; those working in the aerospace industry; and anyone concerned with machine design, machinery wear, and maintenance.

Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has precededan understandingofthescientificprinciples. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding ofthe chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who requirea more fundamental understanding oflubricants.

Download or read book High Temperature Solid Lubricant Materials for Heavy Duty and Advanced Heat Engines written by and published by . This book was released on 1994 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autoignition of Lubricants at Elevated Pressures written by Michael George Zabetakis and published by . This book was released on 1962 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemistry and Technology of Lubricants written by Roy M. Mortier and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Chemistry and Technology of Lubricants" describes the chemistry and technology of base oils, additives and applications of liquid lubricants. This Third Edition reflects how the chemistry and technology of lubricants has developed since the First Edition was published in 1992. The acceleration of performance development in the past 35 years has been as significant as in the previous century: Refinery processes have become more precise in defining the physical and chemical properties of higher quality mineral base oils. New and existing additives have improved performance through enhanced understanding of their action. Specification and testing of lubricants has become more focused and rigorous. "Chemistry and Technology of Lubricants" is directed principally at those working in the lubricants industry as well as individuals working within academia seeking a chemist's viewpoint of lubrication. It is also of value to engineers and technologists requiring a more fundamental understanding of the subject.

Download or read book Gas Turbines written by Claire Soares and published by Elsevier. This book was released on 2014-10-23 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering basic theory, components, installation, maintenance, manufacturing, regulation and industry developments, Gas Turbines: A Handbook of Air, Sea and Land Applications is a broad-based introductory reference designed to give you the knowledge needed to succeed in the gas turbine industry, land, sea and air applications.Providing the big picture view that other detailed, data-focused resources lack, this book has a strong focus on the information needed to effectively decision-make and plan gas turbine system use for particular applications, taking into consideration not only operational requirements but long-term life-cycle costs in upkeep, repair and future use.With concise, easily digestible overviews of all important theoretical bases and a practical focus throughout, Gas Turbines is an ideal handbook for those new to the field or in the early stages of their career, as well as more experienced engineers looking for a reliable, one-stop reference that covers the breadth of the field. - Covers installation, maintenance, manufacturer's specifications, performance criteria and future trends, offering a rounded view of the area that takes in technical detail as well as well as industry economics and outlook - Updated with the latest industry developments, including new emission and efficiency regulations and their impact on gas turbine technology - Over 300 pages of new/revised content, including new sections on microturbines, non-conventional fuel sources for microturbines, emissions, major developments in aircraft engines, use of coal gas and superheated steam, and new case histories throughout highlighting component improvements in all systems and sub-systems

Download or read book High Temperature Gear and Spline Lubricant Studies written by Donald J. Fessett and published by . This book was released on 1961 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: