Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members Suggests a unified approach to designing columns with normal- and high-strength steel and concrete
Download or read book High Strength Steel Structures written by Gang Shi and published by Woodhead Publishing. This book was released on 2022-04-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength steel (HSS) is critical to modern buildings and civil engineering structures. Novel research, methods, and designs are continually being developed. High-Strength Steel Structures presents advances in the fundamental mechanical performance of HSS structures, and design guidance and methods for practical engineering. The book considers the fundamental behaviour of HSS structures, including their material properties, and sectional residual stress distribution, long and stud columns subjected to compression, and seismic performance. The volume presents the latest advances from a leading research group, based at Tsinghua University in China, and most of the findings described here are new to national or international standards. The book gives details on the experimental, theoretical and numerical studies that went into the mechanical performance, design methodology and engineering application of an innovative structure system. Six chapters introduce HSS structures; consider their material properties; the residual stress modelling of HSS sections; the overall building behaviour and local buckling behaviour of HSS columns; and finally the seismic behaviour of HSS structures. This title offers a comprehensive reference for practicing engineers and architects, and a blueprint for future studies on the design and practical engineering of HSS structures. Presents the latest research and advances in high-strength steel structures Presents findings not yet covered by national or international standards Describes a range of experimental programmes on high-strength steel structures including their data Details robust scientific design methods for high-strength steel structures with typical structural elements Offers innovative design methodologies, as well as research methodologies valuable for future research
Download or read book Advanced High Strength Sheet Steels written by Nina Fonstein and published by Springer. This book was released on 2015-11-01 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all types of advanced high strength steels ranging from dual-phase, TRIP. Complex phase, martensitic, TWIP steels to third generation steels, including promising candidates as carbide free bainitic steels, med Mn and Quenching & Partitioning processed steels. The author presents fundamentals of physical metallurgy of key features of structure and relationship of structure constituents with mechanical properties as well as basics of processing AHSS starting from most important features of intercritical heat treatment, with focus on critical phase transformations and influence of alloying and microalloying. This book intends to summarize the existing knowledge to show how it can be utilized for optimization and adaption of steel composition, processing, and for additional improvement of steel properties that should be recommended to engineering personal of steel designers, producers and end users of AHSS as well as to students of colleges and Universities who deal with materials for auto industry.
Download or read book Design Manual for High strength Steels written by H. Malcolm Priest and published by . This book was released on 1954 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Properties of Steel in Fire Conditions written by Weiyong Wang and published by Academic Press. This book was released on 2019-11-10 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material Properties of Steel Fire Conditions is a major new contribution on how to understand the material properties of steel in fires. The application of new types of steel and development of sophisticated codes of practice has grown dramatically in recent years, making this a timely resource on the topic. Under fire conditions, knowing the material properties of steel is essential in the fire resistance design of steel structures, such as in Eurocode3. This book shows that the reduction factors of mechanical properties of different steels are quite different. In recent years, the authors of this book have carried out significant testing on the material properties of several types of steels, such as Q460 steel, Q690 steel and A992 steel, etc. Users will find this new test data on the material properties of steel with temperature useful in evaluating the fire resistance of steel structures in their own projects. Deals with the material properties of steels in fire conditions, including thermal properties and mechanical properties, such as thermal conductivity, strength, elastic modulus and creep behavior Provides basic knowledge to perform fire resistance design of steel structures Presents information useful to designers, researches and students who must conduct fire resistance design or perform structural analyses on high strength steel structures
Download or read book Use and Application of High performance Steels for Steel Structures written by Joël Raoul and published by IABSE. This book was released on 2005 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding and Joining of Advanced High Strength Steels AHSS written by Mahadev Shome and published by Elsevier. This book was released on 2015-02-25 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welding and Joining of Advanced High Strength Steels (AHSS): The Automotive Industry discusses the ways advanced high strength steels (AHSS) are key to weight reduction in sectors such as automotive engineering. It includes a discussion on how welding can alter the microstructure in the heat affected zone, producing either excessive hardening or softening, and how these local changes create potential weaknesses that can lead to failure. This text reviews the range of welding and other joining technologies for AHSS and how they can be best used to maximize the potential of AHSS. Reviews the properties and manufacturing techniques of advanced high strength steels (AHSS) Examines welding processes, performance, and fatigue in AHSS Focuses on AHSS welding and joining within the automotive industry
Download or read book Behavior and Design of High Strength Constructional Steel written by Guo-Qiang Li and published by Woodhead Publishing. This book was released on 2020-10-21 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behavior and Design of High-Strength Constructional Steel presents readers with extensive information on the behavior of high-strength constructional steels, providing them with the confidence they need to use them in a safe and economic manner to design and construct steel structures. The book includes detailed discussions on the mechanical properties of HHS while explaining the latest progress in research and design guidelines, including material properties at ambient and elevated temperatures. In addition, the book explains the behavior of elementary members subject to different types of loads and load combinations, and those that are integral to the design of bolted and welded connections. The hysteretic behavior of HHS materials and members are also discussed. This is critical for application and designs under earthquakes and fire conditions. The buckling behaviors of HSS box-section and H-section columns are included in terms of experimental and numerical investigations, along with the geometric imperfection induced by welding. Provides a comprehensive review on the topic of high-strength constructional steel and the latest progress in research and design guidelines Explains the behavior of elementary members subjected to different types of loads and load combinations Recommends structural systems for using high-strength constructional steels in seismic zones
Download or read book Design of High Strength Steel Reinforced Concrete Columns written by Sing-Ping Chiew and published by CRC Press. This book was released on 2018-04-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials – columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volume provides detailed worked examples on use of these high strength materials. This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.
Download or read book Design of Concrete Structures Using High strength Steel Reinforcement written by Bahram M. Shahrooz and published by Transportation Research Board. This book was released on 2011 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaluates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online.
Download or read book Welded High Strength Steel Structures written by A. F. Blom and published by AEA Technology Rail. This book was released on 1997 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welded High Strength Steel Structures written by Jin Jiang and published by John Wiley & Sons. This book was released on 2023-11-22 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welded High Strength Steel Structures Understand the impact of fatigue on high strength steel joints with this comprehensive overview High strength steels are highly sought after for industrial and engineering applications ranging from armored vehicles to welded engineering components built to withstand considerable stress. The mechanical properties of welded joints made from high strength steel are integrally linked to the specific welding process, which can have an enormous impact on fatigue performance. Welded High Strength Steel Structures: Welding Effects and Fatigue Performance provides a comprehensive analysis of high strength steel joints and the ramifications of the welding process. It guides readers through the process of performing thermal analysis of high strength steel structures and evaluate fatigue performance in the face of residual stress. The result is a volume with innumerable use cases in engineering and manufacture. Welded High Strength Steel Structures readers will also find: An author with decades of experience in research and engineering Numerous studies of various classes of high strength steel joints Studies on tubular structures for welding residual stress Welded High Strength Steel Structures is a must-own for welding specialists, materials scientists, mechanical engineers, and researchers or industry professionals in related fields.
Download or read book Recent Trends in Cold Formed Steel Construction written by Cheng Yu and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Trends in Cold-Formed Steel Construction discusses advancements in an area that has become an important construction material for buildings. The book addresses cutting-edge new technologies and design methods using cold-formed steel as a main structural material, and provides technical guidance on how to design and build sustainable and energy-efficient cold-formed steel buildings. Part One of the book introduces the codes, specifications, and design methods for cold-formed steel structures, while Part Two provides computational analysis of cold-formed steel structures. Part Three examines the structural performance of cold-formed steel buildings and reviews the thermal performance, acoustic performance, fire protection, floor vibrations, and blast resistance of these buildings, with a final section reviewing innovation and sustainability in cold-formed steel construction. Addresses building sciences issues and provides performance solutions for cold-formed buildings Provides guidance for using the next generation design method, computational tools, and technologies Edited by an experienced researcher and educator with significant knowledge on new developments in cold-formed steel construction
Download or read book Welded High Strength Steel Structures written by Jin Jiang and published by John Wiley & Sons. This book was released on 2023-11-29 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welded High Strength Steel Structures Understand the impact of fatigue on high strength steel joints with this comprehensive overview High strength steels are highly sought after for industrial and engineering applications ranging from armored vehicles to welded engineering components built to withstand considerable stress. The mechanical properties of welded joints made from high strength steel are integrally linked to the specific welding process, which can have an enormous impact on fatigue performance. Welded High Strength Steel Structures: Welding Effects and Fatigue Performance provides a comprehensive analysis of high strength steel joints and the ramifications of the welding process. It guides readers through the process of performing thermal analysis of high strength steel structures and evaluate fatigue performance in the face of residual stress. The result is a volume with innumerable use cases in engineering and manufacture. Welded High Strength Steel Structures readers will also find: An author with decades of experience in research and engineering Numerous studies of various classes of high strength steel joints Studies on tubular structures for welding residual stress Welded High Strength Steel Structures is a must-own for welding specialists, materials scientists, mechanical engineers, and researchers or industry professionals in related fields.
Download or read book Execution of Steel Structures Supplementary Rules for High Yield Strength Steels written by British Standards Institute Staff and published by . This book was released on 2000-12-01 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural steels, Steels, Construction materials, Structural design, Metal sections, Erecting (construction operation), Construction operations, Metalworking, Framed structures, High-tensile steels
Download or read book Structural Steel Selection Considerations written by Reidar Bjorhovde and published by ASCE Publications. This book was released on 2001-01-01 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the Structural Engineering Institute of ASCE; American Institute of Steel Construction, Inc. This report describes the properties of steel and the criteria used to select appropriate steels to serve the intended needs. It presents a detailed evaluation of issues related to steel production, steel materials, design considerations, fabrication considerations, and service issues for structures whose major components are made from structural steel. Specific recommendations are made for how to deal with the large number of important factors that will affect the eventual performance of the completed structure.
Download or read book Future Steel Buildings written by and published by Lisa Rogers. This book was released on with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
