Download or read book High Speed Precision Motion Control written by Takashi Yamaguchi and published by CRC Press. This book was released on 2017-07-12 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by Takashi Yamaguchi, Mitsuo Hirate, and Chee Khiang Pang, with contributions from pioneers known for their ground-breaking work, High-Speed Precision Motion Control discusses high-precision and fast servo controls in hard disk drives (HDDs). The chapter authors describe the control technologies they’ve developed, most of which have already been successfully applied to mass production of HDDs. As the proposed methodologies have been verified on commercial HDDs at the very least, these advanced control technologies can also be readily applied to precision motion control of other mechatronic systems, e.g., scanners, micro-positioners, photocopiers, atomic force microscopes (AFMs), etc. Each self-contained chapter progresses from concept to technique and presents application examples in automotive, aerospace, aeronautical, and manufacturing engineering. The control technologies are categorized into high-speed servo control, precision control, and environment-friendly control, making it easy to find an appropriate control technology according to their domain of application. The book also makes MATLAB®/SIMULINK® codes for benchmark problems available for download. The control technologies described range from fundamental classical control theories to advanced topics such as multi-rate control. The content contains a healthy balance between materials from the contributor’s research works and that in the wider literature. The resulting resource empowers engineers and managers with the knowledge and know-how to make important decisions and policies.
Download or read book High Speed Precision Motion Control written by Takashi Yamaguchi and published by CRC Press. This book was released on 2017-07-12 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by Takashi Yamaguchi, Mitsuo Hirate, and Chee Khiang Pang, with contributions from pioneers known for their ground-breaking work, High-Speed Precision Motion Control discusses high-precision and fast servo controls in hard disk drives (HDDs). The chapter authors describe the control technologies they’ve developed, most of which have already been successfully applied to mass production of HDDs. As the proposed methodologies have been verified on commercial HDDs at the very least, these advanced control technologies can also be readily applied to precision motion control of other mechatronic systems, e.g., scanners, micro-positioners, photocopiers, atomic force microscopes (AFMs), etc. Each self-contained chapter progresses from concept to technique and presents application examples in automotive, aerospace, aeronautical, and manufacturing engineering. The control technologies are categorized into high-speed servo control, precision control, and environment-friendly control, making it easy to find an appropriate control technology according to their domain of application. The book also makes MATLAB®/SIMULINK® codes for benchmark problems available for download. The control technologies described range from fundamental classical control theories to advanced topics such as multi-rate control. The content contains a healthy balance between materials from the contributor’s research works and that in the wider literature. The resulting resource empowers engineers and managers with the knowledge and know-how to make important decisions and policies.
Download or read book Precision Motion Control written by Kok K. Tan and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision manufacturing is a development that has been gathering momentum over the last century and accelerating over the last 25 years in terms of research, development, and application to product innovation. The driving force in this development arises from requirements for much higher performance of products, higher reliability, longer life, lower cost, and miniaturization. This development is widely known as precision engineering and, today, it is generally defined as manufacturing to tolerances which are better than one part in 105. Applications are abound and can be found in various semiconductor processes (e.g., lithography, wafer probing, inspection), Coordinate Measuring Machines (CMMs) and precision metrology systems (e.g., Scanning Probe Microscopy (SPM)), and robot/machine tools to carry out micro-assembly (e.g., MEMS) and delicate short wavelength laser processes. As an enabling technology for precision engineering, precision instrumentation and measurement, geometrical calibration and compensation, and motion control are directly important issues to be addressed in the overall system design and realization. This book is focused on these aspects of precision engineering. It is a compilation of the major results and publications from a major project which develop a state-of-the-art high-speed, ultra-precision robotic system. A comprehensive and thorough treatment of the subject matter is provided in a manner that is amenable to a broad base of readers, ranging from the academics to the practitioners, by providing detailed experimental verifications of the developed materials.
Download or read book Advances in High Performance Motion Control of Mechatronic Systems written by Takashi Yamaguchi and published by CRC Press. This book was released on 2017-12-19 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronic systems are used in a range of consumer products from large-scale braking systems in vehicular agents to small-scale integrated sensors in mobile phones. To keep pace in the competitive consumer electronics industry, companies need to continuously improve servo evaluation and position control of these mechatronic systems. Advances in High-Performance Motion Control of Mechatronic Systems covers advanced control topics for mechatronic applications. In particular, the book examines control systems design for ultra-fast and ultra-precise positioning of mechanical actuators in mechatronic systems. The book systematically describes motion control design methods for trajectory design, sampled-data precise positioning, transient control using switching control, and dual-stage actuator control. Each method is described in detail, from theoretical aspects to examples of actual industry applications including hard disk drives, optical disk drives, galvano scanners, personal mobility robots, and more. This helps readers better understand how to translate control theories and algorithms from theory to design and implementation in realistic engineering systems. The book also identifies important research directions and advanced control techniques that may provide solutions for the next generation of high-performance mechatronics. Bridging research and industry, this book presents state-of-the-art control design methodologies that are widely applicable to industries such as manufacturing, robotics, home appliances, automobiles, printers, and optical drives. It guides readers toward more effective solutions for high-performance mechatronic systems in their own products.
Download or read book Precision Motion Control written by Kok K. Tan and published by Springer. This book was released on 2001-03-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision manufacturing is a development that has been gathering momentum over the last century and accelerating over the last 25 years in terms of research, development, and application to product innovation. The driving force in this development arises from requirements for much higher performance of products, higher reliability, longer life, lower cost, and miniaturization. This development is widely known as precision engineering and, today, it is generally defined as manufacturing to tolerances which are better than one part in 105. Applications are abound and can be found in various semiconductor processes (e.g., lithography, wafer probing, inspection), Coordinate Measuring Machines (CMMs) and precision metrology systems (e.g., Scanning Probe Microscopy (SPM)), and robot/machine tools to carry out micro-assembly (e.g., MEMS) and delicate short wavelength laser processes. As an enabling technology for precision engineering, precision instrumentation and measurement, geometrical calibration and compensation, and motion control are directly important issues to be addressed in the overall system design and realization. This book is focused on these aspects of precision engineering. It is a compilation of the major results and publications from a major project which develop a state-of-the-art high-speed, ultra-precision robotic system. A comprehensive and thorough treatment of the subject matter is provided in a manner that is amenable to a broad base of readers, ranging from the academics to the practitioners, by providing detailed experimental verifications of the developed materials.
Download or read book Precision Motion Control written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Precision Instruments and Optical Engineering written by Guixiong Liu and published by Springer Nature. This book was released on 2022-04-21 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the new technologies and applications presented at the 2021 International Conference on Precision Instruments and Optical Engineering held in Chengdu, China from 25 to 27 August 2021. The conference aimed to provide a platform for researchers and professionals to share research findings, discuss cutting-edge technologies, promote collaborations and fuel the industrial transition of new technologies. The invited and contributed papers covered recent developments in optoelectronic devices, nanophotonic research, optoelectronic materials, precision instruments, intelligent instruments, laser technology, optical spectroscopy and other optical engineering topics. The book is intended for researchers, engineers and advanced students interested in precision instruments and optical engineering and their applications in diverse fields.
Download or read book Motion Control written by Federico Casolo and published by BoD – Books on Demand. This book was released on 2010-01-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reveals many different aspects of motion control and a wide multiplicity of approaches to the problem as well. Despite the number of examples, however, this volume is not meant to be exhaustive: it intends to offer some original insights for all researchers who will hopefully make their experience available for a forthcoming publication on the subject.
Download or read book Advanced Optimization for Motion Control Systems written by Jun Ma and published by CRC Press. This book was released on 2020-01-24 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision motion control is strongly required in many fields, such as precision engineering, micromanufacturing, biotechnology, and nanotechnology. Although great achievements have been made in control engineering, it is still challenging to fulfill the desired performance for precision motion control systems. Substantial works have been presented to reveal an increasing trend to apply optimization approaches in precision engineering to obtain the control system parameters. In this book, we present a result of several years of work in the area of advanced optimization for motion control systems. The book is organized into two parts: Part I focuses on the model-based approaches, and Part II presents the data-based approaches. To illustrate the practical appeal of the proposed optimization techniques, theoretical results are verified with practical examples in each chapter. Industrial problems explored in the book are formulated systematically with necessary analysis of the control system synthesis. By virtue of the design and implementation nature, this book can be used as a reference for engineers, researchers, and students who want to utilize control theories to solve the practical control problems. As the methodologies have extensive applicability in many control engineering problems, the research results in the field of optimization can be applied to full-fledged industrial processes, filling in the gap between research and application to achieve a technology frontier increment.
Download or read book Intelligent Computing written by Kohei Arai and published by Springer. This book was released on 2019-07-08 with total page 1295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Computing Conference 2019, providing a comprehensive collection of chapters focusing on core areas of computing and their real-world applications. Computing is an extremely broad discipline, encompassing a range of specialized fields, each focusing on particular areas of technology and types of application, and the conference offered pioneering researchers, scientists, industrial engineers, and students from around the globe a platform to share new ideas and development experiences. Providing state-of-the-art intelligent methods and techniques for solving real- world problems, the book inspires further research and technological advances in this important area.
Download or read book VIRTUAL INSTRUMENTATION USING LABVIEW written by JOVITHA JEROME and published by PHI Learning Pvt. Ltd.. This book was released on 2010-03-29 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical and accessible understanding of the fundamental principles of virtual instrumentation. It explains how to acquire, analyze and present data using LabVIEW (Laboratory Virtual Instrument Engineering Workbench) as the application development environment. The book introduces the students to the graphical system design model and its different phases of functionality such as design, prototyping and deployment. It explains the basic concepts of graphical programming and highlights the features and techniques used in LabVIEW to create Virtual Instruments (VIs). Using the technique of modular programming, the book teaches how to make a VI as a subVI. Arrays, clusters, structures and strings in LabVIEW are covered in detail. The book also includes coverage of emerging graphical system design technologies for real-world applications. In addition, extensive discussions on data acquisition, image acquisition, motion control and LabVIEW tools are presented. This book is designed for undergraduate and postgraduate students of instrumentation and control engineering, electronics and instrumentation engineering, electrical and electronics engineering, electronics and communication engineering, and computer science and engineering. It will be also useful to engineering students of other disciplines where courses in virtual instrumentation are offered. Key Features : Builds the concept of virtual instrumentation by using clear-cut programming elements. Includes a summary that outlines important learning points and skills taught in the chapter. Offers a number of solved problems to help students gain hands-on experience of problem solving. Provides several chapter-end questions and problems to assist students in reinforcing their knowledge.
Download or read book Applied Informatics and Communication Part II written by Dehuai Zeng and published by Springer Science & Business Media. This book was released on 2011-08-02 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five volume set CCIS 224-228 constitutes the refereed proceedings of the International conference on Applied Informatics and Communication, ICAIC 2011, held in Xi'an, China in August 2011. The 446 revised papers presented were carefully reviewed and selected from numerous submissions. The papers cover a broad range of topics in computer science and interdisciplinary applications including control, hardware and software systems, neural computing, wireless networks, information systems, and image processing.
Download or read book Intelligent Robotics and Applications written by YongAn Huang and published by Springer. This book was released on 2017-08-04 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volume set LNAI 10462, LNAI 10463, and LNAI 10464 constitutes the refereed proceedings of the 10th International Conference on Intelligent Robotics and Applications, ICIRA 2017, held in Wuhan, China, in August 2017. The 235 papers presented in the three volumes were carefully reviewed and selected from 310 submissions. The papers in this third volume of the set are organized in topical sections on sensors and actuators; mobile robotics and path planning; virtual reality and artificial intelligence; aerial and space robotics; mechatronics and intelligent manufacturing.
Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer. This book was released on 2015-08-19 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three volume set LNAI 9244, 9245, and 9246 constitutes the refereed proceedings of the 8th International Conference on Intelligent Robotics and Applications, ICIRA 2015, held in Portsmouth, UK, in August 2015. The 60 papers included in the first volume are organized in topical sections on analysis and control for complex systems; marine vehicles and oceanic engineering; drives and actuators’ modeling; biomechatronics in bionic dexterous hand; robot actuators and sensors; intelligent visual systems; estimation and identification; and adaptive control system.
Download or read book Navy Technical Disclosure Bulletin written by and published by . This book was released on 1977 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Manufacturing Automation Technologies written by Guang Lin Wang and published by Trans Tech Publications Ltd. This book was released on 2011-07-27 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This special collection describes the latest progress made in, and research results coming out, of new theories, technologies, methods and equipment in the fields of materials processing and manufacturing automation technology. It will be an essential aid in grasping the new technological and research trends, at the international scale, which will drive worldwide communication and cooperation concerning production, education and research in this field. The main topics covered by this special issue include: Innovation and Experience in Materials Processing and Manufacturing Automation Education, Materials Processing Technology, Manufacturing Process Simulation, Agile Manufacturing, Green Manufacturing and Re-Manufacturing, CAD/CAE/CAPP/CAM, Computerized Numerical Control Systems and Flexible Manufacturing Systems, Process Monitoring and Quality Control of Manufacturing Systems, Finite Element Analysis and Structure Optimization for Smart Materials and Other Related Topics. A wealth of ideas for the future.
Download or read book NASA Tech Briefs written by and published by . This book was released on 1995 with total page 1470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
