Download or read book High Resolution 3D Nanoimprint Technology written by Xiaolin Wang and published by kassel university press GmbH. This book was released on 2011 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Modern Coating Technologies written by Mahmood Aliofkhazraei and published by Elsevier. This book was released on 2021-03-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Modern Coating Technologies: Application and Development reviews recent applications and developments of modern coating technologies. The topics in this volume consist of role of antibacterial coatings in the development of biomaterials, insights of technologies for self-healing organic coatings, sensor applications, application of carbon nanotubes–based coating in the field of art conservation, oxide-based self-cleaning and corrosion-protective coatings, protective coatings for wood, applications of optical coatings on spectral selective structures, application of natural antimicrobial coating for controlling foodborne pathogens on meat and fresh produce, efficacy of antimicrobial coating in reducing pathogens on meat, composite membrane: fabrication, characterization, and applications, development of nanostructured HVOF coatings on high strength steel components for turbine blades, nanoscale multilayered composite coating, applications of sol–gel coatings, application of graphene in protective coating industry, application of coatings in outdoor high-voltage installations, defects and doping effects in thin films of transparent and conductive oxides, and functional coatings for lab-on-a-chip systems based on phospholipid polymers.
Download or read book Nanoimprint Lithography An Enabling Process for Nanofabrication written by Weimin Zhou and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprint Lithography: An enabling process for nanofabrication presents a comprehensive description of nanotechnology that is one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures, and an emerging lithography candidates for 22, 16 and 11 nm nodes. It provides the exciting, multidisciplinary field, offering a wide range of topics covering: principles, process, material and application. This book would be of specific interest for researchers and graduate students in the field of nanoscience, nanotechnology and nanofabrication, material, physical, chemical, electric engineering and biology. Dr. Weimin Zhou is an associate professor at Shanghai Nanotechnology Promotion Center, China.
Download or read book Nanoimprint Technology written by Jun Taniguchi and published by John Wiley & Sons. This book was released on 2013-06-13 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale pattern transfer technology using molds is a rapidly advancing area and one that has seen much recent attention due to its potential for use in nanotechnology industries and applications. However, because of these rapid advances, it can be difficult to keep up with the technological trends and the latest cutting-edge methods. In order to fully understand these pioneering technologies, a comprehensive understanding of the basic science and an overview of the techniques are required. Nanoimprint Technology: Nanotransfer for Thermoplastic and Photocurable Polymers covers the latest nanotransfer science based on polymer behaviour. Polymer fluid dynamics are described in detail, and injection moulding, nanoimprint lithography and micro contact printing are also discussed. Cutting-edge nanotransfer technologies and applications are also considered and future trends in industry are examined. Key features: • Covers the fundamentals of nanoimprint technology • Presents cutting-edge techniques and applications • Provides industrial examples and describes the mold fabrication process • Considers nanotransfer of thermoplastics by simulation • Describes the design and evaluation of UV curable polymer Nanoimprint Technology: Nanotransfer for Thermoplastic and Photocurable Polymers is a comprehensive reference for industry engineers as well as graduate and undergraduate students, and is a useful source of information for anyone looking to improve their understanding of nanotransfer mechanisms and methods.
Download or read book Nanoimprint Lithography written by Hongbo Lan and published by Nova Science Publishers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithography, the fundamental fabrication process of semiconductor devices, has been playing a critical role in micro-nanofabrication technologies and manufacturing of Integrated Circuits (IC). Traditional optical lithography including contact and project photolithography has contributed significantly to the semiconductor device advancements. Currently, maintaining the rapid pace of half-pitch reduction requires overcoming the challenge of improving and extending the incumbent optical projection lithography technology while simultaneously developing alternative, next generation lithography (NGL) technologies to be used when optical projection lithography is no longer more economical than the alternatives. Furthermore, NIL is also one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures as this highly technical book will give new insight to.
Download or read book Micro and Nanophotonic Technologies written by Patrick Meyrueis and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited and authored by leading experts from top institutions in Europe, the US and Asia, this comprehensive overview of micro- and nanophotonics covers the physical and chemical fundamentals, while clearly focusing on the technologies and applications in industrial R&D. As such, the book reports on the four main areas of telecommunications and display technologies; light conversion and energy generation; light-based fabrication of materials; and micro- and nanophotonic devices in metrology and control.
Download or read book Liquid Metal Biomaterials written by Jing Liu and published by Springer. This book was released on 2018-07-14 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first-ever book to illustrate the principles and applications of liquid metal biomaterials. Room-temperature liquid metal materials are rapidly emerging as next-generation functional materials that display many unconventional properties superior to those of conventional biomaterials. Their outstanding, unique versatility (“one material, diverse capabilities”) opens many exciting opportunities for the medical sciences. The book reviews representative applications of liquid metal biomaterials from both therapeutic and diagnostic aspects. It also discusses related efforts to employ liquid metals to overcome today’s biomedical challenges. It will provide readers with a comprehensive understanding of the technical advances and fundamental discoveries on the frontier, and thus equip them to investigate and utilize liquid metal biomaterials to tackle various critical problems.
Download or read book Fundamentals of Nanoparticles written by Abdel Salam Hamdy Makhlouf and published by William Andrew. This book was released on 2018-08-09 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Nanoparticles: Classifications, Synthesis Methods, Properties and Characterization explores the nanoparticles and architecture of nanostructured materials being used today in a comprehensive, detailed manner. This book focuses primarily on the characterization, properties and synthesis of nanoscale materials, and is divided into three major parts. This is a valuable reference for materials scientists, and chemical and mechanical engineers working in R&D and academia, who want to learn more about how nanoparticles and nanomaterials are characterized and engineered. Part one covers nanoparticles formation, self-assembly in the architecture nanostructures, types and classifications of nanoparticles, and signature physical and chemical properties, toxicity and regulations. Part two presents different ways to form nanometer particles, including bottom-up and top-down approaches, the classical and non-classical theories of nanoparticles formation and self-assembly, surface functionalization and other surface treatments to allow practical use. Part three covers characterization of nanoparticles and nanostructured materials, including the determination of size and shape, in addition to atomic and electronic structures and other important properties. - Includes new physical and chemical techniques for the synthesis of nanoparticles and architecture nanostructures - Features an in-depth treatment of nanoparticles and nanostructures, including their characterization and chemical and physical properties - Explores the unusual properties of materials that are developed by modifying their shape and composition and by manipulating the arrangement of atoms and molecules - Explains important techniques for the synthesis, fabrication and the characterization of complex nano-architectures
Download or read book Handbook of Nanosensors written by Gomaa A. M. Ali and published by Springer Nature. This book was released on with total page 1769 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribological Performance of Artificial Joints written by Amir Kamali and published by MDPI. This book was released on 2019-07-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joint replacement is a very successful medical treatment. However, the survivorship of the implants could be adversely affected due to the loss of materials in the form of particles or ions as the bearing surfaces articulate against earch other. The consequent tissue and immune response to the wear products, remain one of the key factors of their failure. Tribology has been defined as the science and technology of interacting surfaces in relative motion and all related wear products (e.g., particles, ions, etc.). Over the last few decades, in an attempt to understand and improve joint replacement technology, the tribological performance of several material combinations have been studied experimentally and assessed clinically. In addition, research has focused on the biological effects and long term consequences of wear products. Improvements have been made in manufacturing processes, precision engineering capabilities, device designs and materials properties in order to minimize wear and friction and maximize component longevity in vivo. This book investigates the in vivo and in vitro performance of the orthopaedic implants and their advanced bearings. Contributions are solicited from the researchers working in the field of biotribology and bioengineering
Download or read book From Additive Manufacturing to 3D 4D Printing 2 written by Jean-Claude André and published by John Wiley & Sons. This book was released on 2017-11-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing, which was first invented in France and then applied in the United States, is now 33 years old and represents a market of around 5 billion euros per year, with annual growth of between 20 and 30%. Today, additive manufacturing is experiencing a great amount of innovation in its processes, software, engineering and materials used. Its strength as a process has more recently allowed for the exploration of new niches, ranging from applications at nanometer and decameter scales, to others in mechanics and health. As a result, the limitations of the process have also begun to emerge, which include the quality of the tools, their cost of manufacture, the multi-material aspects, functionalities and surface conditions. Volume 2 of this series presents the current techniques, improvements and limits of additive manufacturing, providing an up-to-date review of this process.
Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.
Download or read book Nanocoatings and Ultra Thin Films written by Abdel Salam Hamdy Makhlouf and published by Elsevier. This book was released on 2011-09-14 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coatings are used for a wide range of applications, from anti-fogging coatings for glass through to corrosion control in the aerospace and automotive industries. Nanocoatings and ultra-thin films provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings.Part one covers technologies used in the creation and analysis of thin films, including chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films. Part two focuses on the applications of nanocoatings and ultra-thin films, with chapters covering topics such as nanocoatings for architectural glass, packaging applications, conventional and smart nanocoatings for corrosion protection in aerospace engineering and ultra-thin membranes for sensor applications.With its distinguished editors and international team of contributors, Nanocoatings and ultra-thin films is an essential reference for professional engineers in the glazing, consctruction, electronics and transport industries, as well as all those with an academic research interest in the field. - Provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings - Focuses on the applications of nanocoatings and ultra-thin films, covering topics such as nanocoatings for architectural glass, packaging applications and ultra-thin membranes for sensor applications - Includes chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films
Download or read book BioMEMS and Biomedical Nanotechnology written by Abraham P. Lee and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: blends materials, fabrication, and structure issues of developing nanobio devices in a single volume. treats major nanobio application areas such as drug delivery, molecular diagnostics, and imaging. chapters written by the leading researchers in the field.
Download or read book Micro Nanolithography written by Jagannathan Thirumalai and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to give proficient people a comprehensive review of up-to-date global improvements in hypothetical and experimental evidences, perspectives and prospects of some newsworthy instrumentation and its numerous technological applications for a wide range of lithographic fabrication techniques. The present theme of this book is concomitant with the lithographic ways and means of deposition, optimization parameters and their wide technological applications. This book consists of six chapters comprehending with eminence of lithography, fabrication and reproduction of periodic nanopyramid structures using UV nanoimprint lithography for solar cell applications, large-area nanoimprint lithography and applications, micro-/nanopatterning on polymers, OPC under immersion lithography associated to novel luminescence applications, achromatic Talbot lithography (ATL) and the soft X-ray interference lithography. Individual chapters provide a base for a wide range of readers from different fiels, students and researchers, who may be doing research pertinent to the topics discussed in this book and find basic as well as advanced principles of designated subjects related to these phenomena explained plainly. The book contains six chapters by experts in different fields of lithographic fabrication and technology from over 15 research institutes across the globe.
Download or read book Polymers for 3D Printing written by Joanna Izdebska-Podsiadły and published by William Andrew. This book was released on 2022-06-05 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers for 3D Printing: Methods, Properties, and Characteristics provides a detailed guide to polymers for 3D printing, bridging the gap between research and practice, and enabling engineers, technicians and designers to utilise and implement this technology for their products or applications. - Presents the properties, attributes, and potential applications of the polymeric materials used in 3D printing - Analyses and compares the available methods for 3D printing, with an emphasis on the latest cutting-edge technologies - Enables the reader to select and implement the correct 3D printing technology, according to polymer properties or product requirements
Download or read book Flexible and Stretchable Electronics written by Seung Hwan Ko and published by MDPI. This book was released on 2018-07-04 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Flexible and Stretchable Electronics" that was published in Micromachines
