Download or read book Process Piping written by C. Becht and published by American Society of Mechanical Engineers. This book was released on 2004 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides background information, historical perspective, and expert commentary on the ASME B31.3 Code requirements for process piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of process piping.
Download or read book Pressure Vessels written by Phillip Ellenberger and published by McGraw Hill Professional. This book was released on 2004-07-16 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure vessels are found everywhere -- from basement boilers to gasoline tankers -- and their usefulness is surpassed only by the hazardous consequences if they are not properly constructed and maintained. This essential reference guides mechanical engineers and technicians through the maze of the continually updated International Boiler and Pressure Vessel Codes that govern safety, design, fabrication, and inspection. * 30% new information including coverage of the recent ASME B31.3 code
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Butterworth-Heinemann. This book was released on 2012-11-05 with total page 3685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees' is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead. - The process safety encyclopedia, trusted worldwide for over 30 years - Now available in print and online, to aid searchability and portability - Over 3,600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned in one resource as opposed to multiple sources
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1973 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Union Catalog written by and published by . This book was released on 1983 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes entries for maps and atlases.
Download or read book written by 国立国会図書館 (Japan) and published by . This book was released on 1900 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics Of Solids And Structures Proceedings Of The International Conference written by F W Travis and published by World Scientific. This book was released on 1991-09-05 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of proceedings consists of invited papers on the following and related subject areas: Composite Materials; Experimental Methods in Stress Analysis; Fracture Mechanics; Structural Stability; Non-Linear Behaviour of Materials and Structures; Plasticity; Numerical Methods; Structural Dynamics.
Download or read book Companion Guide to the ASME Boiler Pressure Vessel Code written by K. R. Rao and published by American Society of Mechanical Engineers. This book was released on 2006 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Volume 1 of the fully revised second edition. Organized to provide the technical professional with ready access to practical solutions, this revised, three-volume, 2,100-page second edition brings to life essential ASME Codes with authoritative commentary, examples, explanatory text, tables, graphics, references, and annotated bibliographic notes. This new edition has been fully updated to the current 2004 Code, except where specifically noted in the text. Gaining insights from the 78 contributors with professional expertise in the full range of pressure vessel and piping technologies, you find answers to your questions concerning the twelve sections of the ASME Boiler and Pressure Vessel Code, as well as the B31.1 and B31.3 Piping Codes. In addition, you find useful examinations of special topics including rules for accreditation and certification; perspective on cyclic, impact, and dynamic loads; functionality and operability criteria; fluids; pipe vibration; stress intensification factors, stress indices, and flexibility factors; code design and evaluation for cyclic loading; and bolted-flange joints and connections.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressure Vessel Design Manual written by Dennis R. Moss and published by Butterworth-Heinemann. This book was released on 2012-12-31 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. - Covers almost all problems that a working pressure vessel designer can expect to face, with 50+ step-by-step design procedures including a wealth of equations, explanations and data - Internationally recognized, widely referenced and trusted, with 20+ years of use in over 30 countries making it an accepted industry standard guide - Now revised with up-to-date ASME, ASCE and API regulatory code information, and dual unit coverage for increased ease of international use
Download or read book Advances in Engineering Design written by Preeti Joshi and published by Springer Nature. This book was released on 2021-03-31 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). The book focuses on latest research in mechanical engineering design and covers topics such as computational mechanics, finite element modeling, computer aided engineering and analysis, fracture mechanics, and vibration. The book brings together different aspects of engineering design and the contents will be useful for researchers and professionals working in this field.
Download or read book Fabrication of Metallic Pressure Vessels written by Owen R. Greulich and published by John Wiley & Sons. This book was released on 2021-11-02 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabrication of Metallic Pressure Vessels A comprehensive guide to processes and topics in pressure vessel fabrication Fabrication of Metallic Pressure Vessels delivers comprehensive coverage of the various processes used in the fabrication of process equipment. The authors, both accomplished engineers, offer readers a broad understanding of the steps and processes required to fabricate pressure vessels, including cutting, forming, welding, machining, and testing, as well as suggestions on controlling costs. Each chapter provides a complete description of a specific fabrication process and details its characteristics and requirements. Alongside the accessible and practical text, you’ll find equations, charts, copious illustrations, and other study aids designed to assist the reader in the real-world implementation of the concepts discussed within the book. You’ll find numerous appendices that include weld symbols, volume and area equations, pipe and tube dimensions, weld deposition rates, lifting shackle data, and more. In addition to detailed discussions of cutting, machining, welding, and post-weld heat treatments, readers will also benefit from the inclusion of: A thorough introduction to construction materials, including both ferrous and nonferrous alloys An exploration of layout, including projection and triangulation, material thickness and bending allowance, angles and channels, and marking conventions A treatment of material forming, including bending versus three-dimensional forming, plastic theory, forming limits, brake forming, roll forming, and tolerances Practical discussions of fabrication, including weld preparation, forming, vessel fit up and assembly, correction of distortion, and transportation of vessels Perfect for new and established engineers, designers, and procurement personnel working with process equipment or in the fabrication field, Fabrication of Metallic Pressure Vessels will also earn a place in the libraries of students in engineering programs seeking a one-stop resource for the fabrication of pressure vessels.
Download or read book written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Safety written by and published by . This book was released on 1994 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Structures and Materials XXIV written by Hong Hao and published by CRC Press. This book was released on 2019-08-08 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6-9 December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including: • Structural mechanics • Computational mechanics • Reinforced and prestressed concrete structures • Steel structures • Composite structures • Civil engineering materials • Fire engineering • Coastal and offshore structures • Dynamic analysis of structures • Structural health monitoring and damage identification • Structural reliability analysis and design • Structural optimization • Fracture and damage mechanics • Soil mechanics and foundation engineering • Pavement materials and technology • Shock and impact loading • Earthquake loading • Traffic and other man-made loadings • Wave and wind loading • Thermal effects • Design codes Mechanics of Structures and Materials: Advancements and Challenges will be of interest to academics and professionals involved in Structural Engineering and Materials Science.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directory of Published Proceedings written by and published by . This book was released on 1995 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
