Download or read book Encyclopedia Of Thermal Packaging Set 3 Thermal Packaging Applications A 3 volume Set written by Avram Bar-cohen and published by World Scientific. This book was released on 2018-10-15 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: remove This Encyclopedia comes in 3 sets. To check out Set 1 and Set 2, please visit Set 1: Thermal Packaging Techniques and Set 2: Thermal Packaging Tools /remove Thermal and mechanical packaging — the enabling technologies for the physical implementation of electronic systems — are responsible for much of the progress in miniaturization, reliability, and functional density achieved by electronic, microelectronic, and nanoelectronic products during the past 50 years. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal packaging on the critical path of nearly every product development effort in traditional, as well as emerging, electronic product categories.Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of pivotal importance in the refinement of traditional products and in the development of products for new applications. The Encyclopedia of Thermal Packaging, compiled in four multi-volume sets (Set 1: Thermal Packaging Techniques, Set 2: Thermal Packaging Tools, Set 3: Thermal Packaging Applications, and Set 4: Thermal Packaging Configurations) provides a comprehensive, one-stop treatment of the techniques, tools, applications, and configurations of electronic thermal packaging. Each of the author-written volumes presents the accumulated wisdom and shared perspectives of a few luminaries in the thermal management of electronics.The four sets in the Encyclopedia of Thermal Packaging will provide the novice and student with a complete reference for a quick ascent on the thermal packaging 'learning curve,' the practitioner with a validated set of techniques and tools to face every challenge, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in thermal management of electronic and photonic components and systems, and most beneficial to undergraduate and graduate students studying mechanical, electrical, and electronic engineering.Set 3: Thermal Packaging ApplicationsThe third set in the Encyclopedia includes two volumes in the planned focus on Thermal Packaging Applications and a single volume on the use of Phase Change Materials (PCM), a most important Thermal Management Technique, not previously addressed in the Encyclopedia. Set 3 opens with Heat Transfer in Avionic Equipment, authored by Dr Boris Abramzon, offering a comprehensive, in-depth treatment of compact heat exchangers and cold plates for avionics cooling, as well as discussion on recent developments in these heat transfer units that are widely used in the thermal control of military and civilian airborne electronics. Along with a detailed presentation of the relevant thermofluid physics and governing equations, and the supporting mathematical design and optimization techniques, the book offers a practical guide for thermal engineers designing avionics cooling equipment, based on the author's 20+ years of experience as a thermal analyst and a practical design engineer for Avionics and related systems.The Set continues with Thermal Management of RF Systems, which addresses sequentially the history, present practice, and future thermal management strategies for electronically-steered RF systems, in the context of the RF operational requirements, as well as device-, module-, and system-level electronic, thermal, and mechanical considerations. This unique text was written by 3 authors, Dr John D Albrecht, Mr David H Altman, Dr Joseph J Maurer, with extensive US Department of Defense and aerospace industry experience in the design, development, and fielding of RF systems. Their combined efforts have resulted in a text, which is well-grounded in the relevant past, present, and future RF systems and technologies. Thus, this volume will provide the designers of advanced radars and other electronic RF systems with the tools and the knowledge to address the thermal management challenges of today's technologies, as well as of advanced technologies, such as wide bandgap semiconductors, heterogeneously integrated devices, and 3D chipsets and stacks.The third volume in Set 3, Phase Change Materials for Thermal Management of Electronic Components, co-authored by Prof Gennady Ziskind and Dr Yoram Kozak, provides a detailed description of the numerical methods used in PCM analysis and a detailed explanation of the processes that accompany and characterize solid-liquid phase-change in popular basic and advanced geometries. These provide a foundation for an in-depth exploration of specific electronics thermal management applications of Phase Change Materials. This volume is anchored in the unique PCM knowledge and experience of the senior author and placed in the context of the extensive solid-liquid phase-change literature in such diverse fields as material science, mathematical modeling, experimental and numerical methods, and thermofluid science and engineering.Related Link(s)
Download or read book Radio Frequency Integrated Circuits and Systems written by Hooman Darabi and published by Cambridge University Press. This book was released on 2020-03-12 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equips students with essential industry-relevant knowledge through in-depth explanations, practical applications, examples, and exercises.
Download or read book Data Converters written by Franco Maloberti and published by Springer Science & Business Media. This book was released on 2007-02-22 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first graduate-level textbook presenting a comprehensive treatment of Data Converters. The advancement of digital electronics urged the availability of a still missing support for teaching and self-learning analog-digital interfaces at many levels: the specification, the conversion methods and architectures, the circuit design and the testing. This book, after the necessary study of the background theoretical elements, covers aspects and provide elements for a deep and comprehensive knowledge. The breath and the level of details of topics is enhanced by introductory material in each chapter and the use of many examples, most of them in the form of computer behavioral simulations. The examples and the end-of-chapter problems help in understanding and favor self-practice using tools that are effective for training and for design activity. Data Converters is a textbook that is also essential for engineering professionals as it was written for responding to a shortage of organically organized material on the topic. The book assumes a solid background in analog and digital circuits as well as a working knowledge of simulation tools for circuit and behavioral analysis. A background on statistical analysis is also helpful, though not strictly necessary. Coverage of all the basic elements essential for a clear understanding of sampling, quantization, noise in sampled-data systems and mathematical tools for sampled-data linear systems Comprehensive definition of the parameters used to specify data converters and necessary for understanding product data sheets Coverage of all the architectures used in Nyquist-rate data converters and detailed study of features, limits and design techniques Detailed study of oversampled and Sigma-Delta converters with simulation examples and use of spectra and histograms for a clear understanding of features and limit if the noise shaping Coverage of digital correction and calibration techniques for enhancing performances Use of theory and intuitive views to explain circuits and systems operation and limits Coverage of testing methods and description of the data processing used for testing and characterization Extensive use of Simulink and Matlab in examples and problem sets to assist reader comprehension and favor deeper study
Download or read book PHASELOCK TECHNIQUES 1966 REPR 1967 written by Floyd Martin Gardner and published by . This book was released on 1966 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS and Beyond written by Tsu-Jae King Liu and published by Cambridge University Press. This book was released on 2015-02-05 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get up to speed with the future of logic switch design with this indispensable introduction to post-CMOS technologies.
Download or read book RF and mm Wave Power Generation in Silicon written by Hua Wang and published by Academic Press. This book was released on 2015-12-10 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and mm-Wave Power Generation in Silicon presents the challenges and solutions of designing power amplifiers at RF and mm-Wave frequencies in a silicon-based process technology. It covers practical power amplifier design methodologies, energy- and spectrum-efficient power amplifier design examples in the RF frequency for cellular and wireless connectivity applications, and power amplifier and power generation designs for enabling new communication and sensing applications in the mm-Wave and THz frequencies. With this book you will learn: - Power amplifier design fundamentals and methodologies - Latest advances in silicon-based RF power amplifier architectures and designs and their integration in wireless communication systems - State-of-the-art mm-Wave/THz power amplifier and power generation circuits and systems in silicon - Extensive coverage from fundamentals to advanced design topics, focusing on various layers of abstraction: from device modeling and circuit design strategy to advanced digital and mixed-signal architectures for highly efficient and linear power amplifiers - New architectures for power amplifiers in the cellar and wireless connectivity covering detailed design methodologies and state-of-the-art performances - Detailed design techniques, trade-off analysis and design examples for efficiency enhancement at power back-off and linear amplification for spectrally-efficient non-constant envelope modulations - Extensive coverage of mm-Wave power-generation techniques from the early days of the 60 GHz research to current state-of the-art reconfigurable, digital mm-Wave PA architectures - Detailed analysis of power generation challenges in the higher mm-Wave and THz frequencies and novel technical solutions for a wide range for potential applications, including ultrafast wireless communication to sensing, imaging and spectroscopy - Contributions from the world-class experts from both academia and industry
Download or read book Frontiers in Planar Lightwave Circuit Technology written by Siegfried Janz and published by Springer Science & Business Media. This book was released on 2006-01-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions to this book constitute an excellent record of many key issues and scientific problems in planar lightwave circuit research. There are detailed overviews of experimental and theoretical work in high index contrast waveguide systems, micro-optical resonators, nonlinear optics, and advanced optical simulation methods, as well as articles describing emerging applications of integrated optics for medical and biological applications.
Download or read book Electronic Components and Systems written by W. H. Dennis and published by Elsevier. This book was released on 2013-10-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to know the fundamental concepts, theories, and processes in the related fields.
Download or read book Proceedings of the Custom Integrated Circuits Conference written by and published by . This book was released on 1989 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Fourth Terminal written by Sylvain Clerc and published by Springer Nature. This book was released on 2020-04-25 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the advantages and challenges of Body-Biasing for integrated circuits and systems, together with the deployment of the design infrastructure needed to generate this Body-Bias voltage. These new design solutions enable state of the art energy efficiency and system flexibility for the latest applications, such as Internet of Things and 5G communications.
Download or read book Towards Green ICT written by Ramjee Prasad and published by CRC Press. This book was released on 2022-09-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICT is playing an increasingly important role in both business and individual's private life. It has increased international interconnectedness and speed up the process of globalization. But on the other side the total energy consumption by the communication and networking devices and the relevant global CO emission is increasing exponentially. ICT has, in many ways, a vital role to play. It accounts for about two percent of global CO emissions. Telecommunications applications can have a direct, tangible impact on lowering greenhouse gas emissions, power consumption, and achieve efficient recycling of equipment waste.This book is the outcome of the special session on Green Communications at 'The 12th International Symposium on Wireless Personal Multimedia Communications' (WPMC) held in September '09 in Sendai, Japan. To the best of the editors' knowledge this is the first book on the Green Information and Communication Technologies (ICT) and can be considered a milestone and a key-tool aimed at driving the industrial, scientific and academic efforts of the international community to guarantee a greener future to the whole planet.
Download or read book Signal Processing Arrays written by W. T. Blackband and published by . This book was released on 1967 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wireless Edge Caching written by Thang X. Vu and published by Cambridge University Press. This book was released on 2021-03-11 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the latest research results for both uncoded and coded caching techniques in future wireless network design.
Download or read book BiCMOS Technology and Applications written by Antonio R. Alvarez and published by Springer. This book was released on 2013-03-03 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of bipolar compatible CMOS (BiCMOS) is a fascinating one and of ever-growing practical importance. The "technology pendulum" has swung from the two extremes of preeminence of bipolar in the 1950s and 60s to the apparent endless horizons for VLSI NMOS technology during the 1970s and 80s. Yet starting in the 1980s severallimits were clouding the horizon for pure NMOS technology. CMOS reemerged as a· viable high density, high performance technology. Similarly by the mid 1980s scaled bipolar devices had not only demonstrated new high speed records, but early versions of mixed bipolar/CMOS technology were being produced. Hence the paradigm of either high density . Q[ high speed was metamorphasizing into an opportunity for both speed and density via a BiCMOS approach. Now as we approach the 1990s there have been a number of practical demonstrations of BiCMOS both for memory and logic applications and I expect the trend to escalate over the next decade. This book makes a timely contribution to the field of BiCMOS technology and circuit development. The evolution is now indeed rapid so that it is difficult to make such a book exhaustive of current developments. Probably equally difficult is the fact that the new technology opens a range of novel circuit opportunities that are as yet only formative in their development. Given these obstacles it is a herculean task to try to assemble a book on BiCMOS.
Download or read book THz Communications written by Thomas Kürner and published by Springer Nature. This book was released on 2021-12-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of THz communications, spanning the whole range of applications, propagation and channel models, RF transceiver technology, antennas, baseband techniques, and networking interfaces. The requested data rate in wireless communications will soon reach from 100 Gbit/s up to 1 Tbps necessitating systems with ultra-high bandwidths of several 10s of GHz which are available only above 200 GHz. In the last decade, research at these frequency bands has made significant progress, enabling mature experimental demonstrations of so-called THz communications, which are thus expected to play a vital role in future wireless networks. In addition to chapters by leading experts on the theory, modeling, and implementation of THz communication technology, the book also features the latest experimental results and addresses standardization and regulatory aspects. This book will be of interest to both academic researchers and engineers in the telecommunications industry.
Download or read book Remote Sensing Techniques and Applications written by Henry Collier and published by . This book was released on 2016-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remote sensing plays a prominent role in atmospheric measurements and physical observations of earth's topography. This book contains a detailed explanation of the various concepts and applications of remote sensing such as climate change, greenhouse emissions, various remote sensing instruments, remote sensing techniques for monitoring of agricultural productivity, etc. The case studies and researches provided in this book will help students, researchers and all associated with the field of remote sensing in gaining advanced information of the field.
Download or read book Digitally Assisted Fully Integrated Wideband Transmitters for High Speed Millimeter Wave Wireless Communication Links written by David del Rio and published by Springer. This book was released on 2018-07-07 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents design methods and considerations for digitally-assisted wideband millimeter-wave transmitters. It addresses comprehensively both RF design and digital implementation simultaneously, in order to design energy- and cost-efficient high-performance transmitters for mm-wave high-speed communications. It covers the complete design flow, from link budget assessment to the transistor-level design of different RF front-end blocks, such as mixers and power amplifiers, presenting different alternatives and discussing the existing trade-offs. The authors also analyze the effect of the imperfections of these blocks in the overall performance, while describing techniques to correct and compensate for them digitally. Well-known techniques are revisited, and some new ones are described, giving examples of their applications and proving them in real integrated circuits.
