Download or read book High Performance Computing in Science and Engineering 06 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2007-07-26 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in simulation on supercomputers. Leading researchers present results achieved on systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2006. The reports cover all fields of computational science and engineering ranging from CFD via computational physics and chemistry to computer science with a special emphasis on industrially relevant applications. The book comes with illustrations and tables.

Download or read book High Performance Computing in Science and Engineering Garching Munich 2007 written by Siegfried Wagner and published by Springer Science & Business Media. This book was released on 2008-10-22 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the fourth time, the Leibniz Supercomputing Centre (LRZ) and the Com- tence Network for Technical, Scienti c High Performance Computing in Bavaria (KONWIHR) publishes the results from scienti c projects conducted on the c- puter systems HLRB I and II (High Performance Computer in Bavaria). This book reports the research carried out on the HLRB systems within the last three years and compiles the proceedings of the Third Joint HLRB and KONWIHR Result and Reviewing Workshop (3rd and 4th December 2007) in Garching. In 2000, HLRB I was the rst system in Europe that was capable of performing more than one Tera op/s or one billion oating point operations per second. In 2006 it was replaced by HLRB II. After a substantial upgrade it now achieves a peak performance of more than 62 Tera op/s. To install and operate this powerful system, LRZ had to move to its new facilities in Garching. However, the situation regarding the need for more computation cycles has not changed much since 2000. The demand for higher performance is still present, a trend that is likely to continue for the foreseeable future. Other resources like memory and disk space are currently in suf cient abundance on this new system.

Download or read book Introduction to High Performance Computing for Scientists and Engineers written by Georg Hager and published by CRC Press. This book was released on 2010-07-02 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by high performance computing (HPC) experts, Introduction to High Performance Computing for Scientists and Engineers provides a solid introduction to current mainstream computer architecture, dominant parallel programming models, and useful optimization strategies for scientific HPC. From working in a scientific computing center, the author

Download or read book High Performance Computing in Science and Engineering 20 written by Wolfgang E. Nagel and published by Springer Nature. This book was released on 2022-01-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2020. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering written by Frédéric Magoulès and published by . This book was released on 2007 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Computing in Science and Engineering 19 written by Wolfgang E. Nagel and published by Springer Nature. This book was released on 2021-05-29 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2019. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 17 written by Wolfgang E. Nagel and published by Springer. This book was released on 2018-02-16 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2017. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance.The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 14 written by Wolfgang E. Nagel and published by Springer. This book was released on 2015-02-14 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS). The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 13 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2013-12-12 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in simulation on supercomputers. Leading researchers present results achieved on systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2013. The reports cover all fields of computational science and engineering ranging from CFD via computational physics and chemistry to computer science with a special emphasis on industrially relevant applications. Presenting results of one of Europe’s leading systems this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high performance computing. Its outstanding results in achieving highest performance for production codes are of particular interest for both the scientist and the engineer. The book comes with a wealth of coloured illustrations and tables of results.

Download or read book Introduction to High Performance Computing for Scientists and Engineers written by Georg Hager and published by CRC Press. This book was released on 2017-11-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by high performance computing (HPC) experts, Introduction to High Performance Computing for Scientists and Engineers provides a solid introduction to current mainstream computer architecture, dominant parallel programming models, and useful optimization strategies for scientific HPC. From working in a scientific computing center, the authors gained a unique perspective on the requirements and attitudes of users as well as manufacturers of parallel computers. The text first introduces the architecture of modern cache-based microprocessors and discusses their inherent performance limitations, before describing general optimization strategies for serial code on cache-based architectures. It next covers shared- and distributed-memory parallel computer architectures and the most relevant network topologies. After discussing parallel computing on a theoretical level, the authors show how to avoid or ameliorate typical performance problems connected with OpenMP. They then present cache-coherent non-uniform memory access (ccNUMA) optimization techniques, examine distributed-memory parallel programming with message passing interface (MPI), and explain how to write efficient MPI code. The final chapter focuses on hybrid programming with MPI and OpenMP. Users of high performance computers often have no idea what factors limit time to solution and whether it makes sense to think about optimization at all. This book facilitates an intuitive understanding of performance limitations without relying on heavy computer science knowledge. It also prepares readers for studying more advanced literature. Read about the authors' recent honor: Informatics Europe Curriculum Best Practices Award for Parallelism and Concurrency.

Download or read book High Performance Computing in Science and Engineering 18 written by Wolfgang E. Nagel and published by Springer. This book was released on 2019-06-07 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2018. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 15 written by Wolfgang E. Nagel and published by Springer. This book was released on 2016-02-05 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2015. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 21 written by Wolfgang E. Nagel and published by Springer Nature. This book was released on 2023-03-03 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2021. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 05 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2006-03-06 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the advances in modelling and simulation on supercomputers. Presenting results achieved on systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2005, these reports cover various fields of computational science and engineering, ranging from CFD via computational physics and chemistry to computer science.

Download or read book High Performance Scientific and Engineering Computing written by Laurence Tianruo Yang and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Scientific And Engineering Computing: Hardware/Software Support contains selected chapters on hardware/software support for high performance scientific and engineering computing from prestigious workshops in the fields such as PACT-SHPSEC, IPDPS-PDSECA and ICPP-HPSECA. This edited volume is basically divided into six main sections which include invited material from prominent researchers around the world. We believe all of these contributed chapters and topics not only provide novel ideas, new results and state-of-the-art techniques in this field, but also stimulate the future research activities in the area of high performance computing for science and engineering applications. High Performance Scientific And Engineering Computing: Hardware/Software Support is designed for a professional audience, composed of researchers and practitioners in industry. This book is also suitable as a secondary text for graduate-level students in computer science and engineering.

Download or read book High Performance Computing in Science and Engineering written by Tomáš Kozubek and published by Springer. This book was released on 2016-06-02 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the Second International Conference on High Performance Computing in Science and Engineering, HPCSE 2015, held in Soláň, Czech Republic, in May 2015. The 14 papers presented in this volume were carefully reviewed and selected from 21 submissions. The conference provides an international forum for exchanging ideas among researchers involved in scientific and parallel computing, including theory and applications, as well as applied and computational mathematics. The focus of HPCSE 2015 was on models, algorithms, and software tools which facilitate efficient and convenient utilization of modern parallel and distributed computing architectures, as well as on large-scale applications.

Download or read book High Performance Computing in Science and Engineering 11 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in simulation on supercomputers. Leading researchers present results achieved on systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2011. The reports cover all fields of computational science and engineering, ranging from CFD to computational physics and chemistry, to computer science, with a special emphasis on industrially relevant applications. Presenting results for both vector systems and microprocessor-based systems, the book allows readers to compare the performance levels and usability of various architectures. As HLRS operates not only a large cluster system but also one of the largest NEC vector systems in the world, this book also offers excellent insights into the potential of vector systems. The book covers the main methods used in high-performance computing. Its outstanding results in achieving highest performance for production codes are of particular interest for scientists and engineers alike. The book comes with a wealth of color illustrations and tables of results.