Download or read book High Level Modeling and Synthesis of Analog Integrated Systems written by Ewout S. J. Martens and published by Springer Science & Business Media. This book was released on 2008-01-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various approaches for finding optimal values for the parameters of analog cells have made their entrance in commercial applications. However, a larger impact on the performance is expected if tools are developed which operate on a higher abstraction level and consider multiple architectural choices to realize a particular functionality. This book examines the opportunities, conditions, problems, solutions and systematic methodologies for this new generation of analog CAD tools.

Download or read book A Computer Aided Design and Synthesis Environment for Analog Integrated Circuits written by Geert Van der Plas and published by Springer Science & Business Media. This book was released on 2002-04-30 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text addresses the design methodologies and CAD tools available for the systematic design and design automation of analogue integrated circuits. Two complementary approaches discussed increase analogue design productivity, demonstrated throughout using design times of the different design experiments undertaken.

Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.

Download or read book A Top Down Constraint Driven Design Methodology for Analog Integrated Circuits written by Henry Chang and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design is often the bottleneck when designing mixed analog-digital systems. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits presents a new methodology based on a top-down, constraint-driven design paradigm that provides a solution to this problem. This methodology has two principal advantages: (1) it provides a high probability for the first silicon which meets all specifications, and (2) it shortens the design cycle. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits is part of an ongoing research effort at the University of California at Berkeley in the Electrical Engineering and Computer Sciences Department. Many faculty and students, past and present, are working on this design methodology and its supporting tools. The principal goals are: (1) developing the design methodology, (2) developing and applying new tools, and (3) `proving' the methodology by undertaking `industrial strength' design examples. The work presented here is neither a beginning nor an end in the development of a complete top-down, constraint-driven design methodology, but rather a step in its development. This work is divided into three parts. Chapter 2 presents the design methodology along with foundation material. Chapters 3-8 describe supporting concepts for the methodology, from behavioral simulation and modeling to circuit module generators. Finally, Chapters 9-11 illustrate the methodology in detail by presenting the entire design cycle through three large-scale examples. These include the design of a current source D/A converter, a Sigma-Delta A/D converter, and a video driver system. Chapter 12 presents conclusions and current research topics. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits will be of interest to analog and mixed-signal designers as well as CAD tool developers.

Download or read book Variation Aware Analog Structural Synthesis written by Trent McConaghy and published by Springer Science & Business Media. This book was released on 2009-07-13 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes new tools for front end analog designers, starting with global variation-aware sizing, and extending to novel variation-aware topology design. The tools aid design through automation, but more importantly, they also aid designer insight through automation. We now describe four design tasks, each more general than the previous, and how this book contributes design aids and insight aids to each. The ?rst designer task targeted is global robust sizing. This task is supported by a design tool that does automated, globally reliable, variation-aware s- ing (SANGRIA),and an insight-aiding tool that extracts designer-interpretable whitebox models that relate sizings to circuit performance (CAFFEINE). SANGRIA searches on several levels of problem dif?culty simultaneously, from lower cheap-to-evaluate “exploration” layers to higher full-evaluation “exploitation” layers (structural homotopy). SANGRIAmakes maximal use of circuit simulations by performing scalable data mining on simulation results to choose new candidate designs. CAFFEINE accomplishes its task by tre- ing function induction as a tree-search problem. It constrains its tree search space via a canonical-functional-form grammar, and searches the space with grammatically constrained genetic programming. The second designer task is topology selection/topology design. Topology selection tools must consider a broad variety of topologies such that an app- priate topology is selected, must easily adapt to new semiconductor process nodes, and readily incorporate new topologies. Topology design tools must allow designers to creatively explore new topology ideas as rapidly as possible.

Download or read book Modeling and Simulation of Mixed Analog Digital Systems written by B. Antao and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Simulation of Mixed Analog-Digital Systems brings together in one place important contributions and state-of-the-art research results in this rapidly advancing area. Modeling and Simulation of Mixed Analog-Digital Systems serves as an excellent reference, providing insight into some of the most important issues in the field.

Download or read book Marketing Initiatives for Sustainable Educational Development written by Tripathi, Purnendu and published by IGI Global. This book was released on 2018-06-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology plays a vital role in bridging the digital divide and fostering sustainability in educational development. This is evident through the successful use of social media in educational marketing campaigns and through the integration of massive open online courses to reorient learner interactions in higher education environments. Marketing Initiatives for Sustainable Educational Development contains the latest approaches to maximize self-guided, interdisciplinary learning through the use of strategies such as web-based games to elicit collaborative behavior in student groups. It also explores the important role that technology serves in educating students, especially in the realm of technological skills and competencies. This book is a vital resource for educators, instructional designers, administrators, marketers, and education professionals seeking to enhance student learning and engagement through technology-based learning tools.

Download or read book Circuit and Interconnect Design for RF and High Bit rate Applications written by Hugo Veenstra and published by Springer Science & Business Media. This book was released on 2008-06-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Realizing maximum performance from high bit-rate and RF circuits requires close attention to IC technology, circuit-to-circuit interconnections (i.e., the ‘interconnect’) and circuit design. This detailed book covers each of these topics from theory to practice, with sufficient detail to help you produce circuits that are ‘first-time right’. Many practical circuit examples are included to demonstrate the interplay between technology, interconnect and circuit design.

Download or read book Low Power High Speed ADCs for Nanometer CMOS Integration written by Zhiheng Cao and published by Springer Science & Business Media. This book was released on 2008-07-15 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power High-Speed ADCs for Nanometer CMOS Integration is about the design and implementation of ADC in nanometer CMOS processes that achieve lower power consumption for a given speed and resolution than previous designs, through architectural and circuit innovations that take advantage of unique features of nanometer CMOS processes. A phase lock loop (PLL) clock multiplier has also been designed using new circuit techniques and successfully tested. 1) A 1.2V, 52mW, 210MS/s 10-bit two-step ADC in 130nm CMOS occupying 0.38mm2. Using offset canceling comparators and capacitor networks implemented with small value interconnect capacitors to replace resistor ladder/multiplexer in conventional sub-ranging ADCs, it achieves 74dB SFDR for 10MHz and 71dB SFDR for 100MHz input. 2) A 32mW, 1.25GS/s 6-bit ADC with 2.5GHz internal clock in 130nm CMOS. A new type of architecture that combines flash and SAR enables the lowest power consumption, 6-bit >1GS/s ADC reported to date. This design can be a drop-in replacement for existing flash ADCs since it does require any post-processing or calibration step and has the same latency as flash. 3) A 0.4ps-rms-jitter (integrated from 3kHz to 300MHz offset for >2.5GHz) 1-3GHz tunable, phase-noise programmable clock-multiplier PLL for generating sampling clock to the SAR ADC. A new loop filter structure enables phase error preamplification to lower PLL in-band noise without increasing loop filter capacitor size.

Download or read book Omnidirectional Inductive Powering for Biomedical Implants written by Bert Lenaerts and published by Springer Science & Business Media. This book was released on 2008-10-14 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Omnidirectional Inductive Powering for Biomedical Implants investigates the feasibility of inductive powering for capsule endoscopy and freely moving systems in general. The main challenge is the random position and orientation of the power receiving system with respect to the emitting magnetic field. Where classic inductive powering assumes a predictable or fixed alignment of the respective coils, the remote system is now free to adopt just any orientation while still maintaining full power capabilities. Before elaborating on different approaches towards omnidirectional powering, the design and optimisation of a general inductive power link is discussed in all its aspects. Special attention is paid to the interaction of the inductive power link with the patient’s body. Putting theory into practice, the implementation of an inductive power link for a capsule endoscope is included in a separate chapter.

Download or read book Structured Analog CMOS Design written by Danica Stefanovic and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structured Analog CMOS Design describes a structured analog design approach that makes it possible to simplify complex analog design problems and develop a design strategy that can be used for the design of large number of analog cells. It intentionally avoids treating the analog design as a mathematical problem, developing a design procedure based on the understanding of device physics and approximations that give insight into parameter interdependences. The basic design concept consists in analog cell partitioning into the basic analog structures and sizing of these basic analog structures in a predefined procedural design sequence. The procedural design sequence ensures the correct propagation of design specifications, the verification of parameter limits and the local optimization loops. The proposed design procedure is also implemented as a CAD tool that follows this book.

Download or read book Low Power UWB CMOS Radar Sensors written by Hervé Paulino and published by Springer Science & Business Media. This book was released on 2008-04-30 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Power UWB CMOS Radar Sensors deals with the problem of designing low cost CMOS radar sensors. The radar sensor uses UWB signals in order to obtain a reasonable target separation capability, while maintaining a maximum signal frequency below 2 GHz. This maximum frequency value is well within the reach of current CMOS technologies. The use of UWB signals means that most of the methodologies used in the design of circuits and systems that process narrow band signals, can no longer be applied. Low Power UWB CMOS Radar Sensors provides an analysis between the interaction of UWB signals, the antennas and the processing circuits. This analysis leads to some interesting conclusions on the types of antennas and types of circuits that should be used. A methodology to compare the noise performance of UWB processing circuits is also derived. This methodology is used to analyze and design the constituting circuits of the radar transceiver. In order to validate the design methodology a CMOS prototype is designed and experimentally evaluated.

Download or read book Biopotential Readout Circuits for Portable Acquisition Systems written by Refet Firat Yazicioglu and published by Springer Science & Business Media. This book was released on 2008-10-16 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopotential Readout Circuits for Portable Acquisition Systems describes one of the main building blocks of such miniaturized biomedical signal acquisition systems. The focus of this book is on the implementation of low-power and high-performance integrated circuit building blocks that can be used to extract biopotential signals from conventional biopotential electrodes. New instrumentation amplifier architectures are introduced and their design is described in detail. These amplifiers are used to implement complete acquisition demonstrator systems that are a stepping stone towards practical miniaturized and low-power systems.

Download or read book Analog Circuits written by Esteban Tlelo-Cuautle and published by . This book was released on 2017 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Editor Biography: Esteban Tlelo-Cuautle received a B.Sc. degree from Instituto Tecnol�gico de Puebla (ITP), M�xico in 1993. He then received both M.Sc. and Ph.D. degrees from Instituto Nacional de Astrof�sica, �ptica y Electr�nica (INAOE), M�xico, in 1995 and 2000, respectively. He has published 13 books and more than 250 works in book chapters, journals and conferences. He is an associate editor of IEEE Transactions on Circuits and Systems I: Regular Papers, and Integration - the VLSI Journal. His research interests include modeling and simulation of circuits and systems, design and applications of chaotic oscillators, symbolic analysis, multi-objective evolutionary algorithms, and analogue/radio frequency (RF) and mixed-signal design automation tools. Book Description: This book includes recent research that focuses on analog integrated circuits and covers three main topics, namely: fundamentals, synthesis and performance. Eleven chapters are divided among these three topics as follows: Chapters One to Four are a part of fundamentals. The first chapter ("The Next Generation of Nanomaterials for Designing Analog Integrated Circuits") describes new directions for applying nanomaterials for the design of modern analog circuits. Chapter Two ("Application of Nullors in Designing Analog Circuits for Frequency Bandwidth") uses the pathological circuit element known as a nullor to design analog integrated circuits with frequency specifications to accomplish a desired bandwidth. Chapter Three ("RC and RL to LC Circuit Conversion, and its Application in Poles and Zeros Identification") details an important property from circuit theory to estimate roots by performing conversions of passive elements. Chapter Four ("Enhanced and Improved Symbolic Circuit Analysis Using MATLAB") relays the development of symbolic circuit analysis and focuses on enhancing an already developed symbolic tool to allow the symbolic analysis of large circuits. The synthesis of analog integrated circuits has been a challenge because there is no way to establish general rules to cover the gap between the behavioral and transistor circuit levels of abstraction. In this book, the second topic includes four chapters, from Five to Eight. Chapter Five ("On the Synthesis of Sinusoidal Oscillators Using Nullors"), just as in Chapter Two, uses the pathological circuit element known as a nullor to perform the synthesis of sinusoidal oscillators, which are quite useful in many electronic systems. Other kinds of oscillators are described in Chapter Six ("Synthesis of SRCOs and Multi-Phase Oscillators from State Variables to their Implementation Using CMOS IC Technology") where the synthesis process identifies the resistor that controls the oscillating frequency and applies a state variable approach. Chapter Seven ("Evolutionary Optimization in the Design of CMOS Analog Integrated Circuits") shows the application of heuristics for circuit optimization, and how it can be extended to bigger analog integrated circuits. Chapter Eight provides details on the synthesis and design of a CMOS harmonic mixer with output power management for narrowband and wideband wireless communications: the Bluetooth and UWB cases. The third part of this book is devoted to analog circuit performances and includes three chapters. Chapter Nine details the FPGA realization of radio frequency (RF) power amplifier models. In this case, the system is modeled in the analog domain and implemented in the digital one. Chapter Ten "White-Box Models of Optimal-Sized Solutions of Analog Integrated Circuits") generates analytical expressions for modeling the dominant behavior of CMOS analog circuits. Finally, Chapter Eleven ("Radial Basis Function Surrogate Modeling for the Accurate Design of Analog Circuits") applies modern modeling approaches to accomplish real target specifications and to improve the design of reliable circuits. Target Audience: Electrical and Electronics Engineers, Integrated Circuits Designers, Electronic Design Automation Developers

Download or read book Computer Aided Design of Analog Circuits and Systems written by L. Richard Carley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Design of Analog Circuits and Systems brings together in one place important contributions and state-of-the-art research results in the rapidly advancing area of computer-aided design of analog circuits and systems. This book serves as an excellent reference, providing insights into some of the most important issues in the field.

Download or read book Fractional Order Control and Synchronization of Chaotic Systems written by Ahmad Taher Azar and published by Springer. This book was released on 2017-02-27 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest advances in and applications of fractional order control and synchronization of chaotic systems, explaining the concepts involved in a clear, matter-of-fact style. It consists of 30 original contributions written by eminent scientists and active researchers in the field that address theories, methods and applications in a number of research areas related to fractional order control and synchronization of chaotic systems, such as: fractional chaotic systems, hyperchaotic systems, complex systems, fractional order discrete chaotic systems, chaos control, chaos synchronization, jerk circuits, fractional chaotic systems with hidden attractors, neural network, fuzzy logic controllers, behavioral modeling, robust and adaptive control, sliding mode control, different types of synchronization, circuit realization of chaotic systems, etc. In addition to providing readers extensive information on chaos fundamentals, fractional calculus, fractional differential equations, fractional control and stability, the book also discusses key applications of fractional order chaotic systems, as well as multidisciplinary solutions developed via control modeling. As such, it offers the perfect reference guide for graduate students, researchers and practitioners in the areas of fractional order control systems and fractional order chaotic systems.

Download or read book Automated Hierarchical Synthesis of Radio Frequency Integrated Circuits and Systems written by Fábio Passos and published by Springer Nature. This book was released on 2020-07-11 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a new design methodology that allows optimization-based synthesis of RF systems in a hierarchical multilevel approach, in which the system is designed in a bottom-up fashion, from the device level up to the (sub)system level. At each level of the design hierarchy, the authors discuss methods that increase the design robustness and increase the accuracy and efficiency of the simulations. The methodology described enables circuit sizing and layout in a complete and automated integrated manner, achieving optimized designs in significantly less time than with traditional approaches.