Download or read book High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters written by Jaroslaw Luszcz and published by John Wiley & Sons. This book was released on 2018-07-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise and thorough reference for designing electrical and electronic systems that employ adjustable speed drives Electrical and electronic systems that employ adjustable speed drives are being increasingly used in present-day automation applications. They are considered by many application engineers as one of the most interfering components, especially in a contemporarily faced industrial environment. This book fills the gap between the high-level academic knowledge in the electromagnetic compatibility (EMC) field and the recommended practical rules for assuring electromagnetic compatibility margin. It focuses on finding and formulating the issues that often occur with the generation and propagation of conducted emission in AC motor drives fed by frequency converters, rather than proposing specific solutions for dealing with them. It also features explanations of selected academic backgrounds of EMC and presents practical case studies. The book starts with an introduction to conducted emission in adjustable speed drives. It then goes on to offer in-depth chapters covering conducted emission origins in switch-mode power converters; conducted emission generation by frequency converter in adjustable speed drives (ASD); propagation of motor side originated conducted emission towards the power grid; modeling of conducted emission in ASD; broadband behavior of ASD components; and impact of a motor feeding cable on CM currents generated in ASD. In addition, this resource: Presents state-of-the-art analysis of undesirable high frequency phenomena accompanying AC motor speed control Discusses the fundamentals of phenomena of electromagnetic interference (EMI) generation in switch mode static converters Provides methodology of modeling-conducted EMI generation and propagation in ASD High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters: Sources and Propagation Paths will appeal to scholars and a wide range of professionals who are involved in the stages of development, design, and application of adjustable speed drives in accordance with ever-increasing EMC requirements.
Download or read book High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters written by Jaroslaw Luszcz and published by John Wiley & Sons. This book was released on 2018-05-31 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise and thorough reference for designing electrical and electronic systems that employ adjustable speed drives Electrical and electronic systems that employ adjustable speed drives are being increasingly used in present-day automation applications. They are considered by many application engineers as one of the most interfering components, especially in a contemporarily faced industrial environment. This book fills the gap between the high-level academic knowledge in the electromagnetic compatibility (EMC) field and the recommended practical rules for assuring electromagnetic compatibility margin. It focuses on finding and formulating the issues that often occur with the generation and propagation of conducted emission in AC motor drives fed by frequency converters, rather than proposing specific solutions for dealing with them. It also features explanations of selected academic backgrounds of EMC and presents practical case studies. The book starts with an introduction to conducted emission in adjustable speed drives. It then goes on to offer in-depth chapters covering conducted emission origins in switch-mode power converters; conducted emission generation by frequency converter in adjustable speed drives (ASD); propagation of motor side originated conducted emission towards the power grid; modeling of conducted emission in ASD; broadband behavior of ASD components; and impact of a motor feeding cable on CM currents generated in ASD. In addition, this resource: Presents state-of-the-art analysis of undesirable high frequency phenomena accompanying AC motor speed control Discusses the fundamentals of phenomena of electromagnetic interference (EMI) generation in switch mode static converters Provides methodology of modeling-conducted EMI generation and propagation in ASD High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters: Sources and Propagation Paths will appeal to scholars and a wide range of professionals who are involved in the stages of development, design, and application of adjustable speed drives in accordance with ever-increasing EMC requirements.
Download or read book Electromagnetic Interference Issues in Power Electronics and Power Systems written by Firuz Zare and published by Bentham Science Publishers. This book was released on 2011-11-25 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This E-Book focuses on conducted and radiated emission noise generated by different power converters such as Switch Mode power Supplies and DC-AC Inverters. EMI filter design and different approaches to predict common mode and differential mode noise are
Download or read book Induction Motors written by Raúl Gregor and published by BoD – Books on Demand. This book was released on 2015-11-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: AC motors play a major role in modern industrial applications. Squirrel-cage induction motors (SCIMs) are probably the most frequently used when compared to other AC motors because of their low cost, ruggedness, and low maintenance. The material presented in this book is organized into four sections, covering the applications and structural properties of induction motors (IMs), fault detection and diagnostics, control strategies, and the more recently developed topology based on the multiphase (more than three phases) induction motors. This material should be of specific interest to engineers and researchers who are engaged in the modeling, design, and implementation of control algorithms applied to induction motors and, more generally, to readers broadly interested in nonlinear control, health condition monitoring, and fault diagnosis.
Download or read book Proceedings of the IEEE International Symposium on Industrial Electronics written by and published by . This book was released on 2000 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Power Converters and AC Drives written by Bin Wu and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference of the latest developments in MV drive technology in the area of power converter topologies This new edition reflects the recent technological advancements in the MV drive industry, such as advanced multilevel converters and drive configurations. It includes three new chapters, Control of Synchronous Motor Drives, Transformerless MV Drives, and Matrix Converter Fed Drives. In addition, there are extensively revised chapters on Multilevel Voltage Source Inverters and Voltage Source Inverter-Fed Drives. This book includes a systematic analysis on a variety of high-power multilevel converters, illustrates important concepts with simulations and experiments, introduces various megawatt drives produced by world leading drive manufacturers, and addresses practical problems and their mitigations methods. This new edition: Provides an in-depth discussion and analysis of various control schemes for the MV synchronous motor drives Examines new technologies developed to eliminate the isolation transformer in the MV drives Discusses the operating principle and modulation schemes of matrix converter (MC) topology and multi-module cascaded matrix converters (CMCs) for MV drives, and their application in commercial MV drives Bin Wu is a Professor and Senior NSERC/Rockwell Automation Industrial Research Chair in Power Electronics and Electric Drives at Ryerson University, Canada. He is a fellow of Institute of Electrical and Electronics Engineers (IEEE), Engineering Institute of Canada (EIC), and Canadian Academy of Engineering (CAE). Dr. Wu has published more than 400 papers and holds more than 30 granted/pending US/European patents. He co-authored several books including Power Conversion and Control of Wind Energy Systems and Model Predictive Control of Wind Energy Conversion Systems (both by Wiley-IEEE Press). Mehdi Narimani is a Postdoctoral Research Associate with the Department of Electrical and computer Engineering at Ryerson University, Canada, and Rockwell Automation Canada. He is a senior member of IEEE. Dr. Narimani is author/co-author of more than 50 technical papers and four US/European patents (issued/pending review). His current research interests include power conversion, high power converters, control of power electronics, and renewable energy systems.
Download or read book High Performance Control of AC Drives with Matlab Simulink written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Control of AC Drives with Matlab®/Simulink Explore this indispensable update to a popular graduate text on electric drive techniques and the latest converters used in industry The Second Edition of High Performance Control of AC Drives with Matlab®/Simulink delivers an updated and thorough overview of topics central to the understanding of AC motor drive systems. The book includes new material on medium voltage drives, covering state-of-the-art technologies and challenges in the industrial drive system, as well as their components, and control, current source inverter-based drives, PWM techniques for multilevel inverters, and low switching frequency modulation for voltage source inverters. This book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A thorough introduction to high performance drives, including the challenges and requirements for electric drives and medium voltage industrial applications An exploration of mathematical and simulation models of AC machines, including DC motors and squirrel cage induction motors A treatment of pulse width modulation of power electronic DC-AC converter, including the classification of PWM schemes for voltage source and current source inverters Examinations of harmonic injection PWM and field-oriented control of AC machines Voltage source and current source inverter-fed drives and their control Modelling and control of multiphase motor drive system Supported with a companion website hosting online resources. Perfect for senior undergraduate, MSc and PhD students in power electronics and electric drives, High Performance Control of AC Drives with Matlab®/Simulink will also earn a place in the libraries of researchers working in the field of AC motor drives and power electronics engineers in industry.
Download or read book Electromagnetic Interference from Variable Speed Motor Drives written by J. D. Maggs and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A methodology is presented which can be used to produce the level of electromagnetic interference, in the form of conducted and radiated emissions, from variable speed drives, the drive that was modelled being a Eurotherm 583 drive. The conducted emissions are predicted using an accurate circuit model of the drive and its associated equipment. The circuit model was constructed from a number of different areas, these being: the power electronics of the drive, the line impedance stabilising network used during the experimental work to measure the conducted emissions, a model of an induction motor assuming near zero load, an accurate model of the shielded cable which connected the drive to the motor, and finally the parasitic capacitances that were present in the drive modelled. The conducted emissions were predicted with an error of +/-6dB over the frequency range 150kHz to 16MHz, which compares well with the limits set in the standards which specify a frequency range of 150kHz to 30MHz. The conducted emissions model was also used to predict the current and voltage sources which were used to predict the radiated emissions from the drive. Two methods for the prediction of the radiated emissions from the drive were investigated, the first being two-dimensional finite element analysis and the second three-dimensional transmission line matrix modelling. The finite element model took account of the features of the drive that were considered to produce the majority of the radiation, these features being the switching of the IGBT's in the inverter, the shielded cable which connected the drive to the motor as well as some of the cables that were present in the drive.
Download or read book Electromagnetic Compatibility of Electric Vehicle written by Li Zhai and published by Springer Nature. This book was released on 2021-01-30 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the electromagnetic compatibility(EMC) of electric vehicle(EV), including EMC of the whole vehicle, electromagnetic interference(EMI) prediction and suppression of motor drive system, EMI prediction and suppression of DC-DC converter, electromagnetic field safety and EMC of wireless charging system, signal integrity and EMC of the vehicle controller unit(VCU), EMC of battery management system(BMS), electromagnetic radiated emission diagnosis and suppression of the whole vehicle, etc. The analysis method, modeling and simulation method, test method and rectification method of EMC are demonstrated. The simulation and experimental results are presented as tables and figures. This book is useful as reference for graduate students, senior undergraduates and engineering technicians of vehicle engineering related majors. For EMI prediction, suppression and EMC optimization design for EVs, this book provides reference for engineers to solve EMC problems. This book is intended for senior undergraduates, postgraduates, lecturers and laboratory researchers engaged in electric vehicle and electromagnetic compatibility research.
Download or read book Variable Frequency AC Motor Drive Systems written by David Finney and published by Presbyterian Publishing Corp. This book was released on 1988 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: AC motors. Power switching devices. The six-step voltage source inverter for induction motors. The pulse width modulated voltage source inverter for induction motors. The six-step current source inverter drive. The six-step synchro-convertor system for synchronous motors. The current source inverter for the capacitor self-excited induction motor. The cycloconvertor. The slip energy recovery system for wound rotor induction motors.
Download or read book ISIE written by and published by . This book was released on 1997 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dirty Electricity written by Samuel Milham MD MPH and published by iUniverse. This book was released on 2012-12-06 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: When Thomas Edison began wiring New York City with a direct current electricity distribution system in the 1880s, he gave humankind the magic of electric light, heat, and power; in the process, though, he inadvertently opened a Pandoras Box of unimaginable illness and death. Dirty Electricity tells the story of Dr. Samuel Milham, the scientist who first alerted the world about the frightening link between occupational exposure to electromagnetic fields and human disease. Milham takes readers through his early years and education, following the twisting path that led to his discovery that most of the twentieth century diseases of civilization, including cancer, cardiovascular disease, diabetes, and suicide, are caused by electromagnetic field exposure. In the second edition, he explains how electrical exposure does its damage, and how electricity is causing our current epidemics of asthma, diabetes and obesity. Dr. Milham warns that because of the recent proliferation of radio frequency radiation from cell phones and towers, terrestrial antennas, Wi-Fi and Wi-max systems, broadband internet over power lines, and personal electronic equipment, we may be facing a looming epidemic of morbidity and mortality. In Dirty Electricity, he reveals the steps we must take, personally and as a society, to coexist with this marvelous but dangerous technology.
Download or read book IAS 97 written by IEEE Industry Applications Society. Meeting and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1997 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power control of industrial processes is the major focus of the papers presented at the 1997 IEEE Industry Applications Society Conference which are covered in this text."
Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Conducted Common Mode Electromagnetic Interference in Wide Bandgap Semiconductor Devices Based DC fed Motor Drives written by Di Han and published by . This book was released on 2017 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide Bandgap (WBG) based switching devices, such as silicon carbide (SiC) MOSFETs and gallium nitride (GaN) HEMTs, have proven to be superior to the state-of-the-art Si technology in terms of low loss and high temperature performance. Hence, there has been a trend to replace Si devices with WBG devices in motor drives. However, the fast switching transitions (high dv/dt) and the high switching frequency of WBG devices have raised the potential issue of increased ground current and magnified CM EMI, which has not been systematically studied by the researchers to date. To close this knowledge gap, this thesis first studies the influence of WBG devices' switching behavior on the CM EMI emission of motor drives through an analytical approach. The impact of switching transition time (rise and fall time) and switching frequency on the CM spectrum are quantified. Then, the performance and trade-offs of two existing CM mitigation techniques, i.e. gate resistance adjustment and CM chokes are investigated in WBG-based drives. Finally, two novel inverter topologies, i.e. floated inverter and balanced inverter, are proposed to mitigate the CM EMI emission in WBG-based motor drives. It is shown that the proposed topologies achieve satisfactory reduction in CM EMI, thus are suitable for adoption in WBG-based drive systems.
